Prepare for the Los Angeles Department of Water and Power (LADWP) Electrical Line Mechanic Examination with this comprehensive study guide featuring 300+ expertly compiled practice questions and verified answers covering the essential technical knowledge, safety standards, and field practices required for success in the LADWP hiring and promotional process. This exam preparation resource provides extensive coverage of General Order 95 (G.O. 95) overhead line construction standards, General Order 128 (G.O. 128) underground construction requirements, pole framing, crossarm construction, transformer installation, transformer polarity, electrical grounding systems, temporary and permanent grounding, guying methods, conductor identification, ACSR, AAC, PILC cable, underground distribution systems, overhead distribution systems, feeder circuits, primary and secondary conductors, riser construction, service installations, cutouts, disconnects, capacitor banks, circuit protection, electrical theory, Ohm’s Law, inductance, capacitance, reactance, impedance, transformers, electrical safety, ladder safety, trench safety, CPR, first aid, rescue procedures, traffic control, rigging, lifting equipment, hand lines, slings, rope safety, line hardware, utility construction standards, voltage testing, phasing, underground vault procedures, and field interview preparation. Organized in a practical question-and-answer format, this guide reinforces essential concepts while helping candidates master the technical knowledge and problem-solving skills required for the examination and field operations.
The material closely follows the competency areas commonly assessed during LADWP Electrical Line Mechanic, Distribution Line Mechanic, Apprentice Line Mechanic, and utility lineworker examinations. It systematically reviews overhead and underground electrical distribution systems, construction specifications, electrical calculations, utility safety regulations, grounding techniques, transformer operation, distribution equipment, electrical measurements, conductor characteristics, rescue procedures, and accepted field practices using realistic exam-style questions designed to improve technical understanding, knowledge retention, and examination performance. This study guide serves as an excellent resource for independent study, apprenticeship preparation, interview review, classroom instruction, and final exam revision.
This resource is particularly valuable for LADWP Electrical Line Mechanic applicants, Apprentice Electrical Line Mechanic candidates, Journeyman Lineworkers, Utility Lineworkers, Distribution Line Technicians, Overhead Line Construction personnel, Underground Distribution Technicians, Electrical Utility Apprentices, Power System Technicians, Electrical Maintenance Workers, Utility Operations employees, Electrical Engineering Technology students, Lineman Training Program students, Public Utility candidates, and professionals preparing for municipal utility, electrical distribution, transmission, or power systems careers.
References
Los Angeles Department of Water and Power (LADWP). Electric Distribution Construction Standards and Operating Procedures.
California Public Utilities Commission (CPUC). General Order 95 – Rules for Overhead Electric Line Construction.
California Public Utilities Commission (CPUC). General Order 128 – Rules for Underground Electric Line Construction.
National Electrical Safety Code (NESC). ANSI C2 – National Electrical Safety Code.
Gonen, T. Electric Power Distribution Engineering. CRC Press.
Keywords
LADWP Exam, LADWP Electrical Line Mechanic, LADWP Lineworker, Electrical Line Mechanic, Apprentice Line Mechanic, Utility Lineworker, Distribution Line Mechanic, Overhead Distribution, Underground Distribution, G.O. 95, G.O. 128, General Order 95, General Order 128, Pole Framing, Pole Construction, Pole Steps, Pole Risers, Crossarms, Guy Wires, Guying, Transformers, Transformer Installation, Transformer Polarity, Electrical Grounding, Ground Rods, Temporary Grounds, Bracket Grounding, Shorts and Grounds, ACSR, AAC, PILC Cable, Electrical Theory, Ohm's Law, Resistance, Inductance, Capacitance, Reactance, Impedance, Voltage Testing, Phasing, Voltmeter, Ammeter, Capacitor Banks, Cutouts, Disconnect Switches, Feeders, Primary Conductors, Secondary Conductors, Underground Vaults, Manholes, CPR, First Aid, Ladder Safety, Trench Safety, Rigging, Slings, Hand Line, Electrical Safety, Utility Construction, Power Distribution, Transmission, Line Construction, Utility Interview Questions
Content preview
Ladwp 2026 Expert Verifed Ace
the Test
Pole steps - ANSWER ✔✔135 deg apart
No less than 9' to first step
36" space between steps on same side
Vertical clearance between the lowest energized part of equipment
cut-outs or line disconnects and 0-750 volt conductors attached to: -
ANSWER ✔✔4' from cross arms and extended racks
6' from 3 spool rack
Reference Rules 58.1C, and 58.3A
,Pole risers - ANSWER ✔✔• Priority 1 - Keep riser(s) outside of the
climbing space.
• Priority 2 - Place on opposite side of pole
from oncoming traffic, if not possible to maintain climbing space place
the risers facing traffic.
• Priority 3 - Best remaining location to accommodate direction of
conduit, if riser(s) are to be
placed on the street side of the pole, the distance between the face of
the riser and the curb face
should preferably be 18" if possible, but no less than 12".
High volt signs - ANSWER ✔✔approximately 30" below the lowest
line conductor
energized in excess of 750 volts
6" below the equipment and above all secondary conductors and com
approximately 30 inches below the lowest exposed energized portion of
the pothead.
,Guy make ups - ANSWER ✔✔YBOG
Yellow- 1/4" 2375
Black- 5/16"
Orange 3/8" 5400
Green 7/16" 7250
Service make ups - ANSWER ✔✔#4 orange ORYOG
#2 red
1/0 yellow
3/0 orange
336 green
Bullet colors - ANSWER ✔✔8 sol brown
6 sol green
34.5 mid span lateral - ANSWER ✔✔Min 35' from pole
Reduced tension span not to exceed 55'
Line conductor sizes for mid-span clamp 3/0 ASCR to 795 AAC and 1/0
to 350 CU
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
3
, Max dead end strain on clamp not to exceed 1000 lbs. max wire size of
477 ASCR
& 4/0 CU at reduced tension
Single cross arm - ANSWER ✔✔Carriage bolt w nuts
Mechanical gain
18" da bolt. X2 nuts/washers
V brace 60"
12" machine bolt x 1 washer/nut
Double cross arm - ANSWER ✔✔Boney arm : has all the bolts a d v
brace
Regular arm with mac gain
Center 2 nuts 2 washers