Hairstyling apprenticeship written exam 1 prep
Study online at https://quizlet.com/_8njlje
1. The first step in the hairstyling process is always Client consult
2. The process of shapping and directing the hair into Finger waving
an S pattern through the use of fingers, combes, and
finger waving lotion is called
3. In creating horizontal finger waves, the waves are Side ways and parallel
placed around the head
4. The stationary foundation of a pin curl is the: Base
5. Pin curls that produce tight, firm, long-lasting curls no-stem pin curls
and allow for minimum mobility are known as:
6. Pin curls formed in a shaping should begin at the: Open end
7. The most commonly shaped pin curl bases are rectan- arc-based
gular, triangular, square, or:
8. Pin curls sliced from a shaping and formed without carved curls
lifting the hair from the head are referred to as:
9. The panel of hair on which a roller is placed: base
10. Hair between the scalp and the first turn of a roller is stem
the:
11. The point where curls of the opposite direction meet, indentation
forming a recessed area is called the:
, Hairstyling apprenticeship written exam 1 prep
Study online at https://quizlet.com/_8njlje
12. To smooth hair that is backcombed , hold the teeth of 45 degree angle
a comb or the bristles of a brush at a: Pointing away
from you, and lightly move the comb over the surface
of the hair.
13. Which type of styling product is also known as foam
mousse?
14. A benefit of using Is that they offer firmer, longer hold Texturizers
for fine hair with the least amount of of heaviness.
15. Which of these styling aids is applied to damp wavy Straightening gel
or curly hair and then blown dry to create a smooth,
straight, look that provides the most hold in dry out-
door conditions:
16. one way to remove dirt, oils and product residue from Ammonia
a thermal iron is to use a dampened towel or rag
and wipe the barrel of the iron with a soapy solution
containing a few drops of:
17. Which of the following is a technique used to tem- hair pressing
porarily straighten extremely curly or resistant hair
until the hair is shampooed?
18. Applying a thermal pressing comb through the hair Soft press
twice on each side to remove curl is a:
19. A tight scalp can be made more flexible with hair Scalp message
brushing and the systematic use of:
20. Balance
, Hairstyling apprenticeship written exam 1 prep
Study online at https://quizlet.com/_8njlje
When executing an up do stand back and away from
your work to make sure the Is right and use the mirror
and look at every angle
21. After heating the iron to the desired temperature, test A piece of tissue paper
it on
22. When using rollers, one and a half turns will create: A wave
23. Hot rollers are to be used on: dry hair only
24. The French pleat is an elegant, sleek look that can be A formal function
worn for any occasion, but clients are most likely to
request it for?
25. How long do Velcro rollers need to stay in the hair? 5-10 minutes
26. Hair wrapping can be done on wet or dry hair
27. The technique of drying and styling damp hair in one Blow dry styling
operation is called:
28. The blow dryers nozzle attachment, or _____________ Concentrator
is a directional feature that creates a concentrated
stream of air.
29. Thermal waving and curling is also known as Marcel waving
30. Nonelectrical thermal irons are commonly favored by Excessively curly hair
stylists who cater to clients with ___ hair.
31. What is the best way to practice manipulative tech- Rolling the cold iron in
niques with thermal irons your hand, first forward
and then backward
Study online at https://quizlet.com/_8njlje
1. The first step in the hairstyling process is always Client consult
2. The process of shapping and directing the hair into Finger waving
an S pattern through the use of fingers, combes, and
finger waving lotion is called
3. In creating horizontal finger waves, the waves are Side ways and parallel
placed around the head
4. The stationary foundation of a pin curl is the: Base
5. Pin curls that produce tight, firm, long-lasting curls no-stem pin curls
and allow for minimum mobility are known as:
6. Pin curls formed in a shaping should begin at the: Open end
7. The most commonly shaped pin curl bases are rectan- arc-based
gular, triangular, square, or:
8. Pin curls sliced from a shaping and formed without carved curls
lifting the hair from the head are referred to as:
9. The panel of hair on which a roller is placed: base
10. Hair between the scalp and the first turn of a roller is stem
the:
11. The point where curls of the opposite direction meet, indentation
forming a recessed area is called the:
, Hairstyling apprenticeship written exam 1 prep
Study online at https://quizlet.com/_8njlje
12. To smooth hair that is backcombed , hold the teeth of 45 degree angle
a comb or the bristles of a brush at a: Pointing away
from you, and lightly move the comb over the surface
of the hair.
13. Which type of styling product is also known as foam
mousse?
14. A benefit of using Is that they offer firmer, longer hold Texturizers
for fine hair with the least amount of of heaviness.
15. Which of these styling aids is applied to damp wavy Straightening gel
or curly hair and then blown dry to create a smooth,
straight, look that provides the most hold in dry out-
door conditions:
16. one way to remove dirt, oils and product residue from Ammonia
a thermal iron is to use a dampened towel or rag
and wipe the barrel of the iron with a soapy solution
containing a few drops of:
17. Which of the following is a technique used to tem- hair pressing
porarily straighten extremely curly or resistant hair
until the hair is shampooed?
18. Applying a thermal pressing comb through the hair Soft press
twice on each side to remove curl is a:
19. A tight scalp can be made more flexible with hair Scalp message
brushing and the systematic use of:
20. Balance
, Hairstyling apprenticeship written exam 1 prep
Study online at https://quizlet.com/_8njlje
When executing an up do stand back and away from
your work to make sure the Is right and use the mirror
and look at every angle
21. After heating the iron to the desired temperature, test A piece of tissue paper
it on
22. When using rollers, one and a half turns will create: A wave
23. Hot rollers are to be used on: dry hair only
24. The French pleat is an elegant, sleek look that can be A formal function
worn for any occasion, but clients are most likely to
request it for?
25. How long do Velcro rollers need to stay in the hair? 5-10 minutes
26. Hair wrapping can be done on wet or dry hair
27. The technique of drying and styling damp hair in one Blow dry styling
operation is called:
28. The blow dryers nozzle attachment, or _____________ Concentrator
is a directional feature that creates a concentrated
stream of air.
29. Thermal waving and curling is also known as Marcel waving
30. Nonelectrical thermal irons are commonly favored by Excessively curly hair
stylists who cater to clients with ___ hair.
31. What is the best way to practice manipulative tech- Rolling the cold iron in
niques with thermal irons your hand, first forward
and then backward
