PRECISION MACHINING TECHNOLOGY 2026
CERTIFICATION EVALUATION TEST PAPER
QUESTIONS SOLUTIONS GRADED A PLUS
◉ Sawing Machines.
Answer: There are four common basic types of these machines.
◉ Power Hacksaw.
Answer: The cutting action in this type of saw occurs only in the
forward stroke, which makes them inefficient.
◉ Band Sawing Machines.
Answer: The blade is a continuous metal band with a series of teeth
ground into one edge. The continuous blade cuts constantly, which
reduces sawing time.
◉ Horizontal Band Saw.
Answer: The Blade is in the horizontal orientation. They are capable
of cutting off large pieces of stock quickly and accurately.
◉ Vertical Band Saw.
, Answer: Is used to remove excess material from a part before
beginning other machining operations. Its contouring ability is
useful as it allows complex and intricate shapes quickly and
accurately.
◉ Blade Material.
Answer: Saw Blades can be made of different type of materials. They
are chosen according to the particular application and include
factors such as material being cut, desire rate of cutting and cost.
◉ Carbon Steel Blades.
Answer: Are the least expensive, but must be run at lower speeds
than blades made of harder materials.
◉ Bimetal Blades.
Answer: Has a carbon steel body with a strip of High Speed Steel
welded to the edge. The teeth are cut into the high speed steel strip.
◉ Carbide Tooth.
Answer: Have Tungsten Carbide blazed to a carbon steel body. They
can operate at very high speeds and cut very tough materials than
even Bimetal blades can not cut.
◉ Tooth Set.
CERTIFICATION EVALUATION TEST PAPER
QUESTIONS SOLUTIONS GRADED A PLUS
◉ Sawing Machines.
Answer: There are four common basic types of these machines.
◉ Power Hacksaw.
Answer: The cutting action in this type of saw occurs only in the
forward stroke, which makes them inefficient.
◉ Band Sawing Machines.
Answer: The blade is a continuous metal band with a series of teeth
ground into one edge. The continuous blade cuts constantly, which
reduces sawing time.
◉ Horizontal Band Saw.
Answer: The Blade is in the horizontal orientation. They are capable
of cutting off large pieces of stock quickly and accurately.
◉ Vertical Band Saw.
, Answer: Is used to remove excess material from a part before
beginning other machining operations. Its contouring ability is
useful as it allows complex and intricate shapes quickly and
accurately.
◉ Blade Material.
Answer: Saw Blades can be made of different type of materials. They
are chosen according to the particular application and include
factors such as material being cut, desire rate of cutting and cost.
◉ Carbon Steel Blades.
Answer: Are the least expensive, but must be run at lower speeds
than blades made of harder materials.
◉ Bimetal Blades.
Answer: Has a carbon steel body with a strip of High Speed Steel
welded to the edge. The teeth are cut into the high speed steel strip.
◉ Carbide Tooth.
Answer: Have Tungsten Carbide blazed to a carbon steel body. They
can operate at very high speeds and cut very tough materials than
even Bimetal blades can not cut.
◉ Tooth Set.