INTRO TO EXPLOSIVE SAFETY MANAGEMENT (AMMO 107)
EXAM 200 ACTUAL QUESTIONS AND CORRECT ANSWERS
WITH RATIONALE LATEST 2026 ALREADY GRADED A+
ASSURED PASS
This comprehensive 200-question AMMO 107 Intro to Explosive Safety
Management exam bank provides a rigorous review of Department of Defense
explosives safety principles. Each question is uniquely crafted with realistic
scenarios, multiple-choice options, a definitive correct answer, and a detailed
rationale explaining the underlying regulations, hazard classifications, and
safety protocols. Content spans the Explosives Safety Management Program
(ESMP), hazard classes (1.1-1.6), ammunition life cycles, storage
requirements, static electricity control, HERO, malfunction investigations,
UXO safety, depleted uranium hazards, ESQD analysis, ESSP development,
risk management processes, and transportation safety. Designed to align with
DoD explosives safety standards (DESR 6055.09, AR 385-10), this resource
promotes critical thinking, identifies knowledge gaps, and enhances test-
taking strategies for successful certification as an Explosives Safety
Professional.
1. Who is responsible for developing, implementing, and managing the Explosives
Safety Program (ESP) as part of the overall safety and occupational health program
for an installation?
A) Safety Specialist
B) Quality Assurance Specialist (Ammunition Surveillance)
C) Installation Commander
D) Ammunition Warrant Officer
Correct Answer: C) Installation Commander
Rationale: The Installation Commander holds overall responsibility for developing,
implementing, and managing the Explosives Safety Program (ESP) as part of the
installation's safety and occupational health program .
2. Which regulation governs the hiring of an occupational safety and health
manager for explosives safety?
A) AR 385-10
,B) DA PAM 385-64
C) DESR 6055.09
D) DoDD 6055.09E
Correct Answer: B) DA PAM 385-64
Rationale: DA PAM 385-64 is the regulation that governs the hiring of an
occupational safety and health manager for explosives safety responsibilities .
3. What is the role of a Quality Assurance Specialist (Ammunition Surveillance)
— QASAS?
A) Provide leadership to tactical units regarding ESMP execution
B) Ensure the safety and serviceability of the stockpile and monitor AE uploads,
transportation, and storage activities
C) Advise the commander on all matters relating to explosives safety
D) Serve as the Point of Contact for all ESMP activities
Correct Answer: B) Ensure the safety and serviceability of the stockpile and
monitor AE uploads, transportation, and storage activities
Rationale: The QASAS is responsible for ensuring the safety and serviceability of
the ammunition stockpile and monitoring AE uploads, transportation, and storage
activities .
4. Who provides leadership to tactical units regarding execution of the Explosives
Safety Management Program (ESMP)?
A) Installation Commander
B) Safety Specialist
C) Quality Assurance Specialist
D) Ammunition Warrant Officer
Correct Answer: D) Ammunition Warrant Officer
Rationale: The Ammunition Warrant Officer provides leadership to tactical units
regarding the execution of the Explosives Safety Management Program (ESMP) .
5. Who serves as the Point of Contact (POC) for all ESMP activities on an
installation?
A) Installation Commander
B) Occupational Health and Safety Manager
C) Safety Specialist
D) Ammunition Warrant Officer
Correct Answer: B) Occupational Health and Safety Manager
Rationale: The Occupational Health and Safety Manager serves as the Point of
Contact (POC) for all ESMP activities on an installation .
,6. What is the mission of the Defense Explosives Safety Board (DDESB)?
A) Approve all explosives safety site plans
B) Advise the Secretary of Defense, create and maintain the DoD ESP, and provide
ESP oversight and technical expertise
C) Conduct investigations of ammunition accidents
D) Develop Service-specific explosives safety standards
Correct Answer: B) Advise the Secretary of Defense, create and maintain the DoD
ESP, and provide ESP oversight and technical expertise
Rationale: The DDESB's mission is threefold: (1) advise the Secretary of Defense
and the Services about ESP progress and challenges annually; (2) create and
maintain the DoD ESP; and (3) provide ESP oversight and technical expertise to
the Services .
7. What is the "cardinal rule" of explosives safety?
A) Always use the minimum number of personnel for ammunition operations
B) The minimum amount of explosives for the minimum amount of time
C) Never store different hazard classes together
D) Always wear appropriate personal protective equipment
Correct Answer: B) The minimum amount of explosives for the minimum amount
of time
Rationale: The cardinal rule of explosives safety is to use the minimum amount of
explosives for the minimum amount of time to reduce the risk and potential
consequences of an accident .
8. Which document establishes the minimum level of protection all Services must
provide for explosives safety?
A) AR 385-10
B) DA PAM 385-64
C) DESR 6055.09
D) DoDD 6055.09E
Correct Answer: C) DESR 6055.09
Rationale: DESR 6055.09 (DoD Explosives Safety Regulation) establishes the
minimum level of protection all Services must provide for explosives safety.
Service standards can be more restrictive but not less .
9. Can Service publication safety standards be less restrictive than DoD standards?
A) Yes, if approved by the DDESB
B) No, Service standards can be more restrictive but never less restrictive than
DoD standards
C) Yes, for certain operational conditions
, D) Only for non-tactical units
Correct Answer: B) No, Service standards can be more restrictive but never less
restrictive than DoD standards
Rationale: Service publication safety standards can be more restrictive than DoD
standards but never less restrictive. This ensures a consistent minimum level of
protection across all Services .
10. Who has final approval authority for explosives safety site plans?
A) DDESB
B) Installation Commander
C) Safety Specialist
D) Ammunition Warrant Officer
Correct Answer: B) Installation Commander
Rationale: The Installation Commander has final approval authority for explosives
safety site plans, with DDESB technical review required for certain categories .
11. What does ESMP stand for?
A) Explosive Safety Management Protocol
B) Explosives Safety Management Program
C) Explosive Storage Management Plan
D) Explosive Safety Monitoring Program
Correct Answer: B) Explosives Safety Management Program
Rationale: ESMP stands for Explosives Safety Management Program, which is the
comprehensive program for managing explosives safety on an installation .
12. What are the stages of the ammunition life cycle in the field?
A) Port, storage, ASP, AHA, operational units
B) RDT&E, production, storage, ASP, range
C) Receipt, inspection, storage, issue, use
D) Manufacturing, testing, deployment, disposal
Correct Answer: B) RDT&E, production, storage, ASP, range
Rationale: The ammunition life cycle in the field includes Research, Development,
Test, and Evaluation (RDT&E), production, storage, Ammunition Supply Point
(ASP), and range .
13. What are the stages of the ammunition life cycle in theater?
A) RDT&E, production, storage, ASP, range
B) Port, storage, ASP, AHA, operational units
C) Manufacturing, testing, deployment, disposal
D) Receipt, inspection, storage, issue, use
EXAM 200 ACTUAL QUESTIONS AND CORRECT ANSWERS
WITH RATIONALE LATEST 2026 ALREADY GRADED A+
ASSURED PASS
This comprehensive 200-question AMMO 107 Intro to Explosive Safety
Management exam bank provides a rigorous review of Department of Defense
explosives safety principles. Each question is uniquely crafted with realistic
scenarios, multiple-choice options, a definitive correct answer, and a detailed
rationale explaining the underlying regulations, hazard classifications, and
safety protocols. Content spans the Explosives Safety Management Program
(ESMP), hazard classes (1.1-1.6), ammunition life cycles, storage
requirements, static electricity control, HERO, malfunction investigations,
UXO safety, depleted uranium hazards, ESQD analysis, ESSP development,
risk management processes, and transportation safety. Designed to align with
DoD explosives safety standards (DESR 6055.09, AR 385-10), this resource
promotes critical thinking, identifies knowledge gaps, and enhances test-
taking strategies for successful certification as an Explosives Safety
Professional.
1. Who is responsible for developing, implementing, and managing the Explosives
Safety Program (ESP) as part of the overall safety and occupational health program
for an installation?
A) Safety Specialist
B) Quality Assurance Specialist (Ammunition Surveillance)
C) Installation Commander
D) Ammunition Warrant Officer
Correct Answer: C) Installation Commander
Rationale: The Installation Commander holds overall responsibility for developing,
implementing, and managing the Explosives Safety Program (ESP) as part of the
installation's safety and occupational health program .
2. Which regulation governs the hiring of an occupational safety and health
manager for explosives safety?
A) AR 385-10
,B) DA PAM 385-64
C) DESR 6055.09
D) DoDD 6055.09E
Correct Answer: B) DA PAM 385-64
Rationale: DA PAM 385-64 is the regulation that governs the hiring of an
occupational safety and health manager for explosives safety responsibilities .
3. What is the role of a Quality Assurance Specialist (Ammunition Surveillance)
— QASAS?
A) Provide leadership to tactical units regarding ESMP execution
B) Ensure the safety and serviceability of the stockpile and monitor AE uploads,
transportation, and storage activities
C) Advise the commander on all matters relating to explosives safety
D) Serve as the Point of Contact for all ESMP activities
Correct Answer: B) Ensure the safety and serviceability of the stockpile and
monitor AE uploads, transportation, and storage activities
Rationale: The QASAS is responsible for ensuring the safety and serviceability of
the ammunition stockpile and monitoring AE uploads, transportation, and storage
activities .
4. Who provides leadership to tactical units regarding execution of the Explosives
Safety Management Program (ESMP)?
A) Installation Commander
B) Safety Specialist
C) Quality Assurance Specialist
D) Ammunition Warrant Officer
Correct Answer: D) Ammunition Warrant Officer
Rationale: The Ammunition Warrant Officer provides leadership to tactical units
regarding the execution of the Explosives Safety Management Program (ESMP) .
5. Who serves as the Point of Contact (POC) for all ESMP activities on an
installation?
A) Installation Commander
B) Occupational Health and Safety Manager
C) Safety Specialist
D) Ammunition Warrant Officer
Correct Answer: B) Occupational Health and Safety Manager
Rationale: The Occupational Health and Safety Manager serves as the Point of
Contact (POC) for all ESMP activities on an installation .
,6. What is the mission of the Defense Explosives Safety Board (DDESB)?
A) Approve all explosives safety site plans
B) Advise the Secretary of Defense, create and maintain the DoD ESP, and provide
ESP oversight and technical expertise
C) Conduct investigations of ammunition accidents
D) Develop Service-specific explosives safety standards
Correct Answer: B) Advise the Secretary of Defense, create and maintain the DoD
ESP, and provide ESP oversight and technical expertise
Rationale: The DDESB's mission is threefold: (1) advise the Secretary of Defense
and the Services about ESP progress and challenges annually; (2) create and
maintain the DoD ESP; and (3) provide ESP oversight and technical expertise to
the Services .
7. What is the "cardinal rule" of explosives safety?
A) Always use the minimum number of personnel for ammunition operations
B) The minimum amount of explosives for the minimum amount of time
C) Never store different hazard classes together
D) Always wear appropriate personal protective equipment
Correct Answer: B) The minimum amount of explosives for the minimum amount
of time
Rationale: The cardinal rule of explosives safety is to use the minimum amount of
explosives for the minimum amount of time to reduce the risk and potential
consequences of an accident .
8. Which document establishes the minimum level of protection all Services must
provide for explosives safety?
A) AR 385-10
B) DA PAM 385-64
C) DESR 6055.09
D) DoDD 6055.09E
Correct Answer: C) DESR 6055.09
Rationale: DESR 6055.09 (DoD Explosives Safety Regulation) establishes the
minimum level of protection all Services must provide for explosives safety.
Service standards can be more restrictive but not less .
9. Can Service publication safety standards be less restrictive than DoD standards?
A) Yes, if approved by the DDESB
B) No, Service standards can be more restrictive but never less restrictive than
DoD standards
C) Yes, for certain operational conditions
, D) Only for non-tactical units
Correct Answer: B) No, Service standards can be more restrictive but never less
restrictive than DoD standards
Rationale: Service publication safety standards can be more restrictive than DoD
standards but never less restrictive. This ensures a consistent minimum level of
protection across all Services .
10. Who has final approval authority for explosives safety site plans?
A) DDESB
B) Installation Commander
C) Safety Specialist
D) Ammunition Warrant Officer
Correct Answer: B) Installation Commander
Rationale: The Installation Commander has final approval authority for explosives
safety site plans, with DDESB technical review required for certain categories .
11. What does ESMP stand for?
A) Explosive Safety Management Protocol
B) Explosives Safety Management Program
C) Explosive Storage Management Plan
D) Explosive Safety Monitoring Program
Correct Answer: B) Explosives Safety Management Program
Rationale: ESMP stands for Explosives Safety Management Program, which is the
comprehensive program for managing explosives safety on an installation .
12. What are the stages of the ammunition life cycle in the field?
A) Port, storage, ASP, AHA, operational units
B) RDT&E, production, storage, ASP, range
C) Receipt, inspection, storage, issue, use
D) Manufacturing, testing, deployment, disposal
Correct Answer: B) RDT&E, production, storage, ASP, range
Rationale: The ammunition life cycle in the field includes Research, Development,
Test, and Evaluation (RDT&E), production, storage, Ammunition Supply Point
(ASP), and range .
13. What are the stages of the ammunition life cycle in theater?
A) RDT&E, production, storage, ASP, range
B) Port, storage, ASP, AHA, operational units
C) Manufacturing, testing, deployment, disposal
D) Receipt, inspection, storage, issue, use
