Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 3 out of 26 pages
Exam (elaborations)

Master Plumber Reviewer Exam Questions with correct answers | verified answers @2026!!!

Document preview thumbnail
Preview 3 out of 26 pages

Master Plumber Reviewer Exam Questions with correct answers | verified answers @2026!!!

Content preview

Master Plumber Reviewer Exam Questions
with correct answers | verified answers
@2026!!!
RA 1378 - ANSWERS💫✔️-Plumbing Law



5 - ANSWERS💫✔️-Minimum number of LAV for 200 males? (Assembly Places- Theaters, Auditoriums,
etc. - for permanent employee use)



50.8 mm - ANSWERS💫✔️-The invert of the inlet of the inlet pipe shall be at a level not less than _____
above the invert of the outlet pipe



Tailpiece - ANSWERS💫✔️-Pipe or tubing that connects the outlet of a plumbing fixture to the trap



DWV System - ANSWERS💫✔️-A piece of framework that expels sewage and greywater from a building
and controls pneumatic stress in the waste-framework channels to help free stream



Air or Water - ANSWERS💫✔️-All sections of a plumbing drainage and vent system must be tested with



Section 5 - ANSWERS💫✔️-The 22 basic Principles of Master Plumbing is enumerated in what section of
RA 1378?



1 - ANSWERS💫✔️-Minimum number of WC for 100 males? (Assembly Places - Theaters, Auditoriums,
Convention Halls, etc. - for public use)



Group Vent - ANSWERS💫✔️-a branch vent that performs its functions for two (2) or more traps.



150% - ANSWERS💫✔️-Minimum pressure required to test water supply system



2" - ANSWERS💫✔️-Minimum size of p-trap for floor drain

,House Sewer - ANSWERS💫✔️-Part of a plumbing system extending from point 0.6 m of the inner face of
the foundation wall of building to the junction with another sewer



Any suitable opening - ANSWERS💫✔️-Air test for a plumbing drainage and vent system shall be made by
attaching the air compressor or other test apparatus to



Section 2 - ANSWERS💫✔️-The scope of pluming practice is enumerated in what section of the Plumbing
Law?



each five persons - ANSWERS💫✔️-Where there is exposure to skin contamination with poisonous,
infectious, or irritating materials, provide one lavatory for



228.6 mm - ANSWERS💫✔️-The side walls shall extend at least ___ above the liquid depth. (Septic Tank)



600 mm - ANSWERS💫✔️-What is the maximum distance allowed for the trap of the floor drain to be
placed below the finished floor line to facilitate cleaning in case of line trouble?



Indirect Waste - ANSWERS💫✔️-When floor drainage is required for a cold storage room used for storing
or holding food or drink, the drain must be connected to the sanitary drainage system though a/an



50.8 mm - ANSWERS💫✔️-The cover of the septic tank shall be at least ___ above the back-vent
openings.



Height of building - ANSWERS💫✔️-Vertical distance from the "grade line" to the highest point of the
coping of a flat roof or to the top line of a mansard roof or to the average height of the highest gable of
a pitch or hip-roof



Friction - ANSWERS💫✔️-Refers to the resistance delivered by streaming water with fittings and inside
surface of the pipe.

, Dearerator - ANSWERS💫✔️-To receive the discharge from aeration, what is installed at the bottom
portion of the soil stack where the house drain is connected?



Apartment buildings with up to 100 dwelling units - ANSWERS💫✔️-The requirements for installation of
grease interceptors exclude



equal to the required cross-sectional area - ANSWERS💫✔️-Inlet and outlet pipe fittings or baffles, and
compartment partitions shall have a free vent area ______ of the house sewer or private sewer
discharging therein to provide free ventilation above the water surface from the disposal field or
seepage pit through the septic tank, house sewer, and stack to the outer air.



Flow Control - ANSWERS💫✔️-To ensure effectiveness, the wastes entering the grease interceptor must
not exceed the manufacturer's rated capacity. For this reason, a _____ must be installed.



Welded joint & Seam - ANSWERS💫✔️-Any joint or seam obtained by the joining of metal parts in a
plastic molten state.



Water - ANSWERS💫✔️-Combination of hydrogen and oxygen



Regulating Equipment - ANSWERS💫✔️-include all valves and controls used in plumbing systems which
are required to be accessible.



Sufficient Strength - ANSWERS💫✔️-Satisfactory hanger which supports any piping must be of



President of the Philippines - ANSWERS💫✔️-Who shall appoint the Board of Examiners for Master
Plumber?



considered equivalent to one lavatory - ANSWERS💫✔️-When provided with water outlets for such
space, a 610 mm width of was sink or 457 mm diameter of a circular basin, shall be



Normal Pressure - ANSWERS💫✔️-pressure range measured over a period of 24 hours

Document information

Uploaded on
July 19, 2026
Number of pages
26
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers
$25.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Tutordanty01
3.0
(1)
Sold
2
Followers
0
Items
468
Last sold
1 month ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions