NWSA TTT-1 EXAM LATEST WITH ACTUAL
QUESTIONS AND CORRECT VERIFIED ANSWERS
ALREADY GRADED A+ | 100% GUARANTEED PASS!
| QUESTIONS | COMPREHENSIVE STUDY GUIDE
1. What is the purpose of a turnbuckle on a guyed wire?
• A) Connect two wires
• B) Provide electrical grounding
• C) Adjust tension
• D) Support the tower
Answer: C
2. What is fall restraint?
• A) Stop a fall after it occurs
• B) Prevent injury by preventing a fall
• C) Arrest a fall in progress
• D) Slow a fall
Answer: B
3. What is free fall?
• A) The distance from the anchor point to the ground
• B) The time between the start and the fall being arrested
• C) The distance a worker travels before the fall is stopped
• D) The time between the start and the fall being arrested (stopped)
Answer: D
4. ANSI 10.48 is considered a:
• A) Federal regulation
, • B) State law
• C) Best practice standard
• D) Manufacturer guideline
Answer: C
5. OSHA regulations for tower work are found in which standard?
• A) 29 CFR 1910
• B) 29 CFR 1926 Subpart R
• C) 29 CFR 1926 Subpart P
• D) 29 CFR 1915
Answer: B
6. What is the minimum approach distance for unqualified personnel
near energized lines?
• A) 5 feet
• B) 10 feet
• C) 10-15 feet depending on voltage
• D) 20 feet
Answer: C
7. Which of the following is required for safety glasses to be certified?
• A) OSHA approval
• B) Z87.1 stamp
• C) ANSI Z89.1
• D) UL listing
Answer: B
8. What does the Z87.1 stamp on safety glasses indicate?
• A) High impact resistance
, • B) Compliance with ANSI standards for eye protection
• C) UV protection
• D) Anti-fog coating
Answer: B
9. All connecting devices must be:
• A) Manual closing
• B) Self-closing and self-locking
• C) Auto-closing only
• D) Manual locking
Answer: B
10. What must be considered before any structure is demolished?
• A) Weather conditions
• B) Construction size and type
• C) Number of workers
• D) Time of day
Answer: B
11. What is the maximum free fall distance allowed for personal fall
arrest systems?
• A) 2 feet
• B) 6 feet
• C) 10 feet
• D) 12 feet
Answer: B
12. What is the maximum deceleration distance allowed for personal fall
arrest systems?
• A) 1.5 feet
, • B) 2.5 feet
• C) 3.5 feet
• D) 5 feet
Answer: C
13. What is the minimum breaking strength required for a lanyard?
• A) 2,000 lbs
• B) 5,000 lbs
• C) 10,000 lbs
• D) 15,000 lbs
Answer: B
14. What is the minimum breaking strength required for anchor points?
• A) 2,000 lbs
• B) 5,000 lbs
• C) 5,000 lbs per worker
• D) 10,000 lbs
Answer: C
15. Which of the following is a requirement for hard hats?
• A) Must be replaced every year
• B) Must meet ANSI Z89.1 standards
• C) Must be made of metal
• D) Must be bright orange
Answer: B
16. What does the ANSI Z89.1 standard cover?
• A) Safety glasses
• B) Hard hats
QUESTIONS AND CORRECT VERIFIED ANSWERS
ALREADY GRADED A+ | 100% GUARANTEED PASS!
| QUESTIONS | COMPREHENSIVE STUDY GUIDE
1. What is the purpose of a turnbuckle on a guyed wire?
• A) Connect two wires
• B) Provide electrical grounding
• C) Adjust tension
• D) Support the tower
Answer: C
2. What is fall restraint?
• A) Stop a fall after it occurs
• B) Prevent injury by preventing a fall
• C) Arrest a fall in progress
• D) Slow a fall
Answer: B
3. What is free fall?
• A) The distance from the anchor point to the ground
• B) The time between the start and the fall being arrested
• C) The distance a worker travels before the fall is stopped
• D) The time between the start and the fall being arrested (stopped)
Answer: D
4. ANSI 10.48 is considered a:
• A) Federal regulation
, • B) State law
• C) Best practice standard
• D) Manufacturer guideline
Answer: C
5. OSHA regulations for tower work are found in which standard?
• A) 29 CFR 1910
• B) 29 CFR 1926 Subpart R
• C) 29 CFR 1926 Subpart P
• D) 29 CFR 1915
Answer: B
6. What is the minimum approach distance for unqualified personnel
near energized lines?
• A) 5 feet
• B) 10 feet
• C) 10-15 feet depending on voltage
• D) 20 feet
Answer: C
7. Which of the following is required for safety glasses to be certified?
• A) OSHA approval
• B) Z87.1 stamp
• C) ANSI Z89.1
• D) UL listing
Answer: B
8. What does the Z87.1 stamp on safety glasses indicate?
• A) High impact resistance
, • B) Compliance with ANSI standards for eye protection
• C) UV protection
• D) Anti-fog coating
Answer: B
9. All connecting devices must be:
• A) Manual closing
• B) Self-closing and self-locking
• C) Auto-closing only
• D) Manual locking
Answer: B
10. What must be considered before any structure is demolished?
• A) Weather conditions
• B) Construction size and type
• C) Number of workers
• D) Time of day
Answer: B
11. What is the maximum free fall distance allowed for personal fall
arrest systems?
• A) 2 feet
• B) 6 feet
• C) 10 feet
• D) 12 feet
Answer: B
12. What is the maximum deceleration distance allowed for personal fall
arrest systems?
• A) 1.5 feet
, • B) 2.5 feet
• C) 3.5 feet
• D) 5 feet
Answer: C
13. What is the minimum breaking strength required for a lanyard?
• A) 2,000 lbs
• B) 5,000 lbs
• C) 10,000 lbs
• D) 15,000 lbs
Answer: B
14. What is the minimum breaking strength required for anchor points?
• A) 2,000 lbs
• B) 5,000 lbs
• C) 5,000 lbs per worker
• D) 10,000 lbs
Answer: C
15. Which of the following is a requirement for hard hats?
• A) Must be replaced every year
• B) Must meet ANSI Z89.1 standards
• C) Must be made of metal
• D) Must be bright orange
Answer: B
16. What does the ANSI Z89.1 standard cover?
• A) Safety glasses
• B) Hard hats
