MKT 201 REVIEW EXAMS TIPS QUESTIONS AND
ANSWERS SURE A+
✔✔What are the two instances that the camera must remain stationary? - ✔✔Combined
accuracy check
hip center
✔✔In which menu can you find the MICS status check? - ✔✔pre-surgery checks
✔✔What is the minimum UPS charge lvel for the Mako System to be powered on? -
✔✔85%
✔✔If the implant sizes are ____ and above, the surgeon can use either a standard or
narrow saw blade. If they choose to use a narrow blade, it must be selected in 'Surgeon
Preferences' - ✔✔3
✔✔In addition to the Triathlon trays, the other trays needed for a Mako Total Knee
include __________________________________ - ✔✔MICS Power Tray
Knee Array Tray
Stryker Leg Positioner Instrument Kit
✔✔List the disposable Mako Total Knee instruments. - ✔✔Mako drape
, Mako blade
VIZADISC
Check points
Bone Pins
Leg Positioner disposable kit
silicone retractor cords
✔✔The purpose of Mako Registration is to - ✔✔confirm the accuracy of the Mako
Robotic-Arm and the location of the cutting system.
✔✔What instrumentation is required for Probe Check? - ✔✔Blue probe
Green Probe
End-effector array
✔✔Bone pins should be inserted ___________ to help improve stability throughout the
case. - ✔✔bi-cortically
✔✔The patient must be positioned as ____________ as possible on the bed toward the
robotic-arm with their ___________ arm tucked across their chest to ensure that the
Mako System can be properly positioned with respect to the OR table. - ✔✔lateral,
ipsilateral
✔✔Checkpoints should be placed in ___. - ✔✔Hard bone
10 mm from cut
an area that is easily accessible
✔✔The femoral checkpoint should be placed_______________. - ✔✔in an easily
accessible location, on the medial side of the medial epicondyle, at least 10 mm from
the nearest cut surface, hard bone with the divot facing distally
✔✔The sled should be installed on the base bar such that the _________ is located
over the OR bed. - ✔✔rotating ball
✔✔When inserting the base bar into the rail clamp, ensure sufficient height is left above
the table to ensure the sled will be able to travel the length of the base bar. Ensure the
__________ are properly engaged with the rail clamps before tightening. - ✔✔Base bar
grooves
✔✔While draping the pt, it is important to remind the sterile staff that no more than ____
drapes should be cover the bed rail if they intend to use the Stryker Leg Positioner Kit. -
✔✔2
✔✔Arrays should be positioned so that they are ____________. - ✔✔Co-planar with
respect to the camera
ANSWERS SURE A+
✔✔What are the two instances that the camera must remain stationary? - ✔✔Combined
accuracy check
hip center
✔✔In which menu can you find the MICS status check? - ✔✔pre-surgery checks
✔✔What is the minimum UPS charge lvel for the Mako System to be powered on? -
✔✔85%
✔✔If the implant sizes are ____ and above, the surgeon can use either a standard or
narrow saw blade. If they choose to use a narrow blade, it must be selected in 'Surgeon
Preferences' - ✔✔3
✔✔In addition to the Triathlon trays, the other trays needed for a Mako Total Knee
include __________________________________ - ✔✔MICS Power Tray
Knee Array Tray
Stryker Leg Positioner Instrument Kit
✔✔List the disposable Mako Total Knee instruments. - ✔✔Mako drape
, Mako blade
VIZADISC
Check points
Bone Pins
Leg Positioner disposable kit
silicone retractor cords
✔✔The purpose of Mako Registration is to - ✔✔confirm the accuracy of the Mako
Robotic-Arm and the location of the cutting system.
✔✔What instrumentation is required for Probe Check? - ✔✔Blue probe
Green Probe
End-effector array
✔✔Bone pins should be inserted ___________ to help improve stability throughout the
case. - ✔✔bi-cortically
✔✔The patient must be positioned as ____________ as possible on the bed toward the
robotic-arm with their ___________ arm tucked across their chest to ensure that the
Mako System can be properly positioned with respect to the OR table. - ✔✔lateral,
ipsilateral
✔✔Checkpoints should be placed in ___. - ✔✔Hard bone
10 mm from cut
an area that is easily accessible
✔✔The femoral checkpoint should be placed_______________. - ✔✔in an easily
accessible location, on the medial side of the medial epicondyle, at least 10 mm from
the nearest cut surface, hard bone with the divot facing distally
✔✔The sled should be installed on the base bar such that the _________ is located
over the OR bed. - ✔✔rotating ball
✔✔When inserting the base bar into the rail clamp, ensure sufficient height is left above
the table to ensure the sled will be able to travel the length of the base bar. Ensure the
__________ are properly engaged with the rail clamps before tightening. - ✔✔Base bar
grooves
✔✔While draping the pt, it is important to remind the sterile staff that no more than ____
drapes should be cover the bed rail if they intend to use the Stryker Leg Positioner Kit. -
✔✔2
✔✔Arrays should be positioned so that they are ____________. - ✔✔Co-planar with
respect to the camera
