MKT 201 STUDY ALL EXAMS GUIDE QUESTIONS
AND ANSWERS SURE A+
✔✔Potential notch can be described as the superior edge of anterior cut haptic
modeling the bone surface. - ✔✔False
✔✔A potential notch will be triggered if - ✔✔anterior cut is <5 degree from bone
✔✔The application allows the user to create and save up to 8 unique implant plans
within a session file. - ✔✔True
✔✔Warnings are displayed in red on the main window and information box - ✔✔False
✔✔True notching can be described as... - ✔✔the superior edge of anterior cut heptic
model violating the bone surface
✔✔The ______________are the same anatomic position regardless of right or left leg. -
✔✔anchor positions
✔✔If the overhand warning is triggered , the main window will depict a yellow
__________ on the overhand region of the implant; this will be visible in the coronal,
transverse, and sagittal views. - ✔✔edge
,✔✔The 'femur planning notification' will alert the user if: - ✔✔Medial or lateral distal
resections exceed the preferred range
✔✔Notifications are determined by... - ✔✔surgeon preferences
✔✔If 'laxity view' is enabled, what notification will NOT appear in the main window if it is
triggered? - ✔✔Femur planning (resection depth)
✔✔Warnings are _______ in the software and are determined based on ___________.
- ✔✔pre-set; associated risks
✔✔Which notifications can be pre-set by the user within "surgeon preferences"? -
✔✔Tibia planning
Laxity
Alignment
✔✔Combined coronal alignment can be described as __________. - ✔✔Femoral
component varus/valgus + tibial component varus/valgus
✔✔A surgeon should utilize the default preoperative planning parameters (8-8-7) when
creating their plan prior to the procedure. - ✔✔True
✔✔The rotational arrows change the alignment of the virtual implant components in
what degree increments? - ✔✔0.5 degrees
✔✔The Triathlon femoral component is ____ mm thick distally and posteriorly. - ✔✔8.5
✔✔Maximum combined tibiofemoral flexion equals femoral flexion minus tibial slope -
✔✔False
✔✔Combined sagittal alignment can be described as __________. - ✔✔Femoral
component flexion + tibial slope
✔✔Implant alignment references the varus/valgus, internal/external rotation,
flexion/extension, and anterior/posterior slope of the implants - ✔✔True
✔✔The position of the virtual implants in Implant Planning will dictate the position of the
________________________ - ✔✔stereotactic boundaries in Bone Preparation.
✔✔When making intraoperative adjustments, a surgeon may choose to place
components _________________________ based on the clinical needs of the patient. -
✔✔outside the preoperative planning parameters
, ✔✔Bone resections indicate how much _______________ will be removed from the
distal medial/lateral condyles, posterior medial/lateral condyles, and the proximal
medial/lateral plateau - ✔✔bone volume
✔✔The translational arrows move the position of the virtual implant components in what
mm increments? - ✔✔0.5 mm
✔✔When planning the tibial resection values, it is recommended to reference the most
diseased side. - ✔✔False
✔✔An _____________________ preoperative plan aims to create symmetric bone
resections in the medial and lateral compartments. - ✔✔individualized alignment
✔✔For a preoperative plan with an individualized alignment start, the coronal and
transverse alignments are a result of _________ resection values in flexion and
extension. - ✔✔symmetric
✔✔When creating a preoperative plan with an individualized alignment start, the
resection defaults are - ✔✔6.5-6.5-7 mm
✔✔For an IA start, preoperatively the total combined varus cannot exceed _____ and
the total combined valgus cannot exceed ____ - ✔✔6 degrees, 3 degrees
✔✔For an IA start, what is the default preoperative transverse alignment value for the
tibial componenet? - ✔✔0 degrees ER
✔✔What is the default tibial slope for a PCL protect implant system? - ✔✔3 degrees
✔✔For a VARUS knee, the maximum bone resection value on the proximal medial tibia
is ________ - ✔✔7.0 mm
✔✔For a VALGUS knee, the default bone resection value on the proximal medial tibia is
_________. - ✔✔5.0 mm with a range of +/- 2 mm (3-7 mm)
✔✔The preoperative range for the tibial slope with a PCL protect implant system is
______________. - ✔✔0-3 degrees posterior slope
✔✔For a VARUS knee, the default bone resection value on the proximal lateral tibia
is________. - ✔✔7.0 mm with a range of +/- 2 mm (5-9 mm)
AND ANSWERS SURE A+
✔✔Potential notch can be described as the superior edge of anterior cut haptic
modeling the bone surface. - ✔✔False
✔✔A potential notch will be triggered if - ✔✔anterior cut is <5 degree from bone
✔✔The application allows the user to create and save up to 8 unique implant plans
within a session file. - ✔✔True
✔✔Warnings are displayed in red on the main window and information box - ✔✔False
✔✔True notching can be described as... - ✔✔the superior edge of anterior cut heptic
model violating the bone surface
✔✔The ______________are the same anatomic position regardless of right or left leg. -
✔✔anchor positions
✔✔If the overhand warning is triggered , the main window will depict a yellow
__________ on the overhand region of the implant; this will be visible in the coronal,
transverse, and sagittal views. - ✔✔edge
,✔✔The 'femur planning notification' will alert the user if: - ✔✔Medial or lateral distal
resections exceed the preferred range
✔✔Notifications are determined by... - ✔✔surgeon preferences
✔✔If 'laxity view' is enabled, what notification will NOT appear in the main window if it is
triggered? - ✔✔Femur planning (resection depth)
✔✔Warnings are _______ in the software and are determined based on ___________.
- ✔✔pre-set; associated risks
✔✔Which notifications can be pre-set by the user within "surgeon preferences"? -
✔✔Tibia planning
Laxity
Alignment
✔✔Combined coronal alignment can be described as __________. - ✔✔Femoral
component varus/valgus + tibial component varus/valgus
✔✔A surgeon should utilize the default preoperative planning parameters (8-8-7) when
creating their plan prior to the procedure. - ✔✔True
✔✔The rotational arrows change the alignment of the virtual implant components in
what degree increments? - ✔✔0.5 degrees
✔✔The Triathlon femoral component is ____ mm thick distally and posteriorly. - ✔✔8.5
✔✔Maximum combined tibiofemoral flexion equals femoral flexion minus tibial slope -
✔✔False
✔✔Combined sagittal alignment can be described as __________. - ✔✔Femoral
component flexion + tibial slope
✔✔Implant alignment references the varus/valgus, internal/external rotation,
flexion/extension, and anterior/posterior slope of the implants - ✔✔True
✔✔The position of the virtual implants in Implant Planning will dictate the position of the
________________________ - ✔✔stereotactic boundaries in Bone Preparation.
✔✔When making intraoperative adjustments, a surgeon may choose to place
components _________________________ based on the clinical needs of the patient. -
✔✔outside the preoperative planning parameters
, ✔✔Bone resections indicate how much _______________ will be removed from the
distal medial/lateral condyles, posterior medial/lateral condyles, and the proximal
medial/lateral plateau - ✔✔bone volume
✔✔The translational arrows move the position of the virtual implant components in what
mm increments? - ✔✔0.5 mm
✔✔When planning the tibial resection values, it is recommended to reference the most
diseased side. - ✔✔False
✔✔An _____________________ preoperative plan aims to create symmetric bone
resections in the medial and lateral compartments. - ✔✔individualized alignment
✔✔For a preoperative plan with an individualized alignment start, the coronal and
transverse alignments are a result of _________ resection values in flexion and
extension. - ✔✔symmetric
✔✔When creating a preoperative plan with an individualized alignment start, the
resection defaults are - ✔✔6.5-6.5-7 mm
✔✔For an IA start, preoperatively the total combined varus cannot exceed _____ and
the total combined valgus cannot exceed ____ - ✔✔6 degrees, 3 degrees
✔✔For an IA start, what is the default preoperative transverse alignment value for the
tibial componenet? - ✔✔0 degrees ER
✔✔What is the default tibial slope for a PCL protect implant system? - ✔✔3 degrees
✔✔For a VARUS knee, the maximum bone resection value on the proximal medial tibia
is ________ - ✔✔7.0 mm
✔✔For a VALGUS knee, the default bone resection value on the proximal medial tibia is
_________. - ✔✔5.0 mm with a range of +/- 2 mm (3-7 mm)
✔✔The preoperative range for the tibial slope with a PCL protect implant system is
______________. - ✔✔0-3 degrees posterior slope
✔✔For a VARUS knee, the default bone resection value on the proximal lateral tibia
is________. - ✔✔7.0 mm with a range of +/- 2 mm (5-9 mm)
