TFM11 LATEST 2026 EXAMINERS ALL QUESTIONS
AND ANSWERS SURE A+
✔✔How many times can an applicant attempt a test within 12 months? - ✔✔3
✔✔Repair is considered restoration to operating condition, or replacement of old
equipment. When you replace old equipment, the new equipment must meet the latest
standards, but the entire system does not need to be brought up to code. T/F? -
✔✔True
✔✔What color is an installation label? - ✔✔White
✔✔When must a fire system be "certified"? - ✔✔A. After installation
B. After modification
C. After addition
✔✔If a system has a red label attached, after fixing the conditions a _______ label
should be attached certifying that the corrections were made. - ✔✔Service
✔✔What is the purpose of a Fire Alarm Plans and Record Drawings tag? - ✔✔To certify
that the plans adhere to all codes
, ✔✔Which of the following should a residential white label NOT show? - ✔✔Installation
date and Licensee stamped signature and license number
✔✔What does the licensee signature on a service label mean? - ✔✔The service
performed complies with the requirements of the law
✔✔How many years must a service label stay in place? (with the exception of a Fire
Marshal removing it) - ✔✔2
✔✔If is a system is resulting in a fault condition a _______ label should be placed with
black lettering on the outside of the control panel or in a permanent location. - ✔✔Red
✔✔If, after any service, inspection or test, a system does NOT comply with applicable
codes and standards at the time of install a _________ label should be placed with
black lettering on the outside of the control panel or in a permanent location. -
✔✔Yellow
✔✔When should a blue label be used? - ✔✔It shows that an inspection or test has
taken place
✔✔When should a yellow label be used? - ✔✔The system does not meet applicable
codes and standards
✔✔Which of the below are NOT required on a yellow label? - ✔✔Local Fire Marshal
address and telephone number
✔✔Where should a label be attached? - ✔✔On the outside of the control panel or in a
permanent location
✔✔When should a red label be used? - ✔✔The system does not function or is
inoperable
✔✔After a red label is attached, the property owner or occupant must be orally notified
immediately. The property owner and local jurisdiction must be informed in writing within
5 days of the label being attached. T/F? - ✔✔True
✔✔Which of the below are NOT required on a red label? - ✔✔Superintendent name,
address, telephone and registration number
✔✔Which code specifically deals with Fire Detection and Alarm Device Installation? -
✔✔Texas Insurance Code 6002
✔✔Which TAC title addresses the Fire Alarm rules? - ✔✔28 TAC~~34.600
AND ANSWERS SURE A+
✔✔How many times can an applicant attempt a test within 12 months? - ✔✔3
✔✔Repair is considered restoration to operating condition, or replacement of old
equipment. When you replace old equipment, the new equipment must meet the latest
standards, but the entire system does not need to be brought up to code. T/F? -
✔✔True
✔✔What color is an installation label? - ✔✔White
✔✔When must a fire system be "certified"? - ✔✔A. After installation
B. After modification
C. After addition
✔✔If a system has a red label attached, after fixing the conditions a _______ label
should be attached certifying that the corrections were made. - ✔✔Service
✔✔What is the purpose of a Fire Alarm Plans and Record Drawings tag? - ✔✔To certify
that the plans adhere to all codes
, ✔✔Which of the following should a residential white label NOT show? - ✔✔Installation
date and Licensee stamped signature and license number
✔✔What does the licensee signature on a service label mean? - ✔✔The service
performed complies with the requirements of the law
✔✔How many years must a service label stay in place? (with the exception of a Fire
Marshal removing it) - ✔✔2
✔✔If is a system is resulting in a fault condition a _______ label should be placed with
black lettering on the outside of the control panel or in a permanent location. - ✔✔Red
✔✔If, after any service, inspection or test, a system does NOT comply with applicable
codes and standards at the time of install a _________ label should be placed with
black lettering on the outside of the control panel or in a permanent location. -
✔✔Yellow
✔✔When should a blue label be used? - ✔✔It shows that an inspection or test has
taken place
✔✔When should a yellow label be used? - ✔✔The system does not meet applicable
codes and standards
✔✔Which of the below are NOT required on a yellow label? - ✔✔Local Fire Marshal
address and telephone number
✔✔Where should a label be attached? - ✔✔On the outside of the control panel or in a
permanent location
✔✔When should a red label be used? - ✔✔The system does not function or is
inoperable
✔✔After a red label is attached, the property owner or occupant must be orally notified
immediately. The property owner and local jurisdiction must be informed in writing within
5 days of the label being attached. T/F? - ✔✔True
✔✔Which of the below are NOT required on a red label? - ✔✔Superintendent name,
address, telephone and registration number
✔✔Which code specifically deals with Fire Detection and Alarm Device Installation? -
✔✔Texas Insurance Code 6002
✔✔Which TAC title addresses the Fire Alarm rules? - ✔✔28 TAC~~34.600
