RFT BLOCK 1 CORRECT EVALUATION TEST
QUESTIONS AND ANSWERS SURE A+
✔✔Issue a _______ to an aircraft if you are aware the aircraft is in a position/altitude
which, in your judgement, places it in unsafe proximity to:
- Terrain
- Obstructions
- Other Aircraft - ✔✔Safety Alert
✔✔The issuance of a safety alert is a _________ priority once the controller observes
and recognizes a situation of an aircraft in unsafe proximity to:
- Terrain
- Obstructions
- Other Aircraft - ✔✔First
✔✔Once a safety alert is issued, who determines what course of action, if any, will be
taken? - ✔✔Solely the pilot's
✔✔When Shall North and South Sectors Handoff to each other + Vector IFR Satellite
Arrivals? - ✔✔- Shall be vectored outside of 20NM range ring
- NR Handoff to SR at or Descending to 7,000ft
- SR Handoff to NR at 6,000ft
, ✔✔What is the departing altitude assigned to High Performance Turboprops out of a
gate? - ✔✔12,000 ft or required altitude, whichever is lower
✔✔What is the departing altitude assigned to Piston Aircraft out of a gate? - ✔✔8,000ft
or requested altitude, whichever is lower
✔✔What is the departing altitude assigned to Turbojets out of a gate? - ✔✔17,000ft or
requested altitude, whichever is lower
✔✔NR Hands off aircraft from Reeli to Final at ______ft - ✔✔6,000
✔✔SR Hands off aircraft from Killr to Final at or descending ______ft - ✔✔7,000
✔✔IFR Pop ups and SGF Arrivals are handed off at or below _____ft but must already
be level - ✔✔6,000
✔✔NR and SR hands off Turbojet or High Performance Turboprops to Final from Barts
or ATOKA at or descending _____ft - ✔✔8,000
✔✔What is the TCP for Turbojet Aircraft? (What Altitude) - ✔✔13,000 ft
✔✔What is the TCP for Non Turbojet AC (What Altitude) - ✔✔When they reach Center's
Airspace
✔✔Aircraft may be vectored in Class G Airspace______ - ✔✔Only upon pilot request
and as an additional service
At or above MVA or MIA (Except as authorized for Radar Approaches.SVFR)
✔✔VFR Aircraft may be vectored in another controller's assigned airspace ____ -
✔✔Only if coordination is accomplished
✔✔VFR Aircraft NOT at an altitude assigned by ATC may be vectored ____ - ✔✔At any
altitude within controlled airspace
(Pilot is responsible for Terrain Separation)
✔✔An Aircraft on a special VFR clearance may be vectored ONLY WITHIN - ✔✔Class
B, C, D, or E Surface area
✔✔An aircraft on a no-gyro vector is expected to make standard rate turns of _____
degrees per _____. - ✔✔3 degrees per second
QUESTIONS AND ANSWERS SURE A+
✔✔Issue a _______ to an aircraft if you are aware the aircraft is in a position/altitude
which, in your judgement, places it in unsafe proximity to:
- Terrain
- Obstructions
- Other Aircraft - ✔✔Safety Alert
✔✔The issuance of a safety alert is a _________ priority once the controller observes
and recognizes a situation of an aircraft in unsafe proximity to:
- Terrain
- Obstructions
- Other Aircraft - ✔✔First
✔✔Once a safety alert is issued, who determines what course of action, if any, will be
taken? - ✔✔Solely the pilot's
✔✔When Shall North and South Sectors Handoff to each other + Vector IFR Satellite
Arrivals? - ✔✔- Shall be vectored outside of 20NM range ring
- NR Handoff to SR at or Descending to 7,000ft
- SR Handoff to NR at 6,000ft
, ✔✔What is the departing altitude assigned to High Performance Turboprops out of a
gate? - ✔✔12,000 ft or required altitude, whichever is lower
✔✔What is the departing altitude assigned to Piston Aircraft out of a gate? - ✔✔8,000ft
or requested altitude, whichever is lower
✔✔What is the departing altitude assigned to Turbojets out of a gate? - ✔✔17,000ft or
requested altitude, whichever is lower
✔✔NR Hands off aircraft from Reeli to Final at ______ft - ✔✔6,000
✔✔SR Hands off aircraft from Killr to Final at or descending ______ft - ✔✔7,000
✔✔IFR Pop ups and SGF Arrivals are handed off at or below _____ft but must already
be level - ✔✔6,000
✔✔NR and SR hands off Turbojet or High Performance Turboprops to Final from Barts
or ATOKA at or descending _____ft - ✔✔8,000
✔✔What is the TCP for Turbojet Aircraft? (What Altitude) - ✔✔13,000 ft
✔✔What is the TCP for Non Turbojet AC (What Altitude) - ✔✔When they reach Center's
Airspace
✔✔Aircraft may be vectored in Class G Airspace______ - ✔✔Only upon pilot request
and as an additional service
At or above MVA or MIA (Except as authorized for Radar Approaches.SVFR)
✔✔VFR Aircraft may be vectored in another controller's assigned airspace ____ -
✔✔Only if coordination is accomplished
✔✔VFR Aircraft NOT at an altitude assigned by ATC may be vectored ____ - ✔✔At any
altitude within controlled airspace
(Pilot is responsible for Terrain Separation)
✔✔An Aircraft on a special VFR clearance may be vectored ONLY WITHIN - ✔✔Class
B, C, D, or E Surface area
✔✔An aircraft on a no-gyro vector is expected to make standard rate turns of _____
degrees per _____. - ✔✔3 degrees per second
