Missouri Occupational Safety Specialist
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of OSHA regulations?
A. To increase productivity
B. To eliminate all workplace hazards
C. To ensure safe and healthful working conditions
D. To manage employee wages
Answer: C
Rationale: OSHA’s core mission is to assure safe and healthful
working conditions by setting and enforcing standards and providing
training, outreach, and education.
2. Which document is required to communicate chemical hazards in the
workplace?
A. Safety Data Sheet (SDS)
, B. Job Safety Analysis (JSA)
C. Incident Report
D. Exposure Log
Answer: A
Rationale: SDS provides detailed information about chemical hazards,
handling, storage, and emergency measures.
3. What does PPE stand for?
A. Personal Protective Equipment
B. Primary Protective Equipment
C. Professional Protection Environment
D. Personal Prevention Equipment
Answer: A
Rationale: PPE refers to equipment worn to minimize exposure to
hazards such as gloves, helmets, and respirators.
4. Which agency enforces workplace safety standards in the United
States?
A. EPA
B. OSHA
C. CDC
D. DOT
Answer: B
Rationale: OSHA is responsible for enforcing workplace safety and
health standards.
,5. What is the first step in hazard control according to the hierarchy of
controls?
A. PPE
B. Engineering controls
C. Elimination
D. Administrative controls
Answer: C
Rationale: Elimination removes the hazard entirely and is the most
effective control method.
6. Which is an example of an engineering control?
A. Safety training
B. Wearing gloves
C. Machine guarding
D. Warning signs
Answer: C
Rationale: Engineering controls physically isolate people from
hazards, such as machine guards.
7. What does a “near miss” refer to?
A. A minor injury
B. An event causing property damage
C. An event that could have caused injury but did not
D. A scheduled inspection
Answer: C
, Rationale: A near miss is an unplanned event that did not result in
injury but had the potential to do so.
8. Which OSHA form is used to record workplace injuries and illnesses?
A. OSHA 300 Log
B. OSHA 200 Report
C. OSHA 400 Form
D. OSHA 10 Card
Answer: A
Rationale: The OSHA 300 Log is used to document work-related
injuries and illnesses.
9. What is the purpose of lockout/tagout procedures?
A. Increase productivity
B. Control hazardous energy
C. Improve communication
D. Reduce staffing needs
Answer: B
Rationale: Lockout/tagout prevents accidental machine startup
during maintenance by controlling hazardous energy.
10. Which hazard is most associated with confined spaces?
A. Excess lighting
B. High temperature only
C. Oxygen deficiency and toxic gases
D. Excess noise only
Exam Practice Questions And Correct
Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of OSHA regulations?
A. To increase productivity
B. To eliminate all workplace hazards
C. To ensure safe and healthful working conditions
D. To manage employee wages
Answer: C
Rationale: OSHA’s core mission is to assure safe and healthful
working conditions by setting and enforcing standards and providing
training, outreach, and education.
2. Which document is required to communicate chemical hazards in the
workplace?
A. Safety Data Sheet (SDS)
, B. Job Safety Analysis (JSA)
C. Incident Report
D. Exposure Log
Answer: A
Rationale: SDS provides detailed information about chemical hazards,
handling, storage, and emergency measures.
3. What does PPE stand for?
A. Personal Protective Equipment
B. Primary Protective Equipment
C. Professional Protection Environment
D. Personal Prevention Equipment
Answer: A
Rationale: PPE refers to equipment worn to minimize exposure to
hazards such as gloves, helmets, and respirators.
4. Which agency enforces workplace safety standards in the United
States?
A. EPA
B. OSHA
C. CDC
D. DOT
Answer: B
Rationale: OSHA is responsible for enforcing workplace safety and
health standards.
,5. What is the first step in hazard control according to the hierarchy of
controls?
A. PPE
B. Engineering controls
C. Elimination
D. Administrative controls
Answer: C
Rationale: Elimination removes the hazard entirely and is the most
effective control method.
6. Which is an example of an engineering control?
A. Safety training
B. Wearing gloves
C. Machine guarding
D. Warning signs
Answer: C
Rationale: Engineering controls physically isolate people from
hazards, such as machine guards.
7. What does a “near miss” refer to?
A. A minor injury
B. An event causing property damage
C. An event that could have caused injury but did not
D. A scheduled inspection
Answer: C
, Rationale: A near miss is an unplanned event that did not result in
injury but had the potential to do so.
8. Which OSHA form is used to record workplace injuries and illnesses?
A. OSHA 300 Log
B. OSHA 200 Report
C. OSHA 400 Form
D. OSHA 10 Card
Answer: A
Rationale: The OSHA 300 Log is used to document work-related
injuries and illnesses.
9. What is the purpose of lockout/tagout procedures?
A. Increase productivity
B. Control hazardous energy
C. Improve communication
D. Reduce staffing needs
Answer: B
Rationale: Lockout/tagout prevents accidental machine startup
during maintenance by controlling hazardous energy.
10. Which hazard is most associated with confined spaces?
A. Excess lighting
B. High temperature only
C. Oxygen deficiency and toxic gases
D. Excess noise only
