,NJ CDL HazMat Practice Test 2026 | Questions & Answers |
Graded A+
1. If a company decides to use a stainless steel floor liner for transporting
Division 1.1 explosives, what potential issue could arise?
The transport will be delayed due to inspections.
A chemical reaction could occur, leading to safety hazards.
There will be no issues as stainless steel is a strong material.
The explosives will be more secure during transport.
2. If a driver must leave their vehicle loaded with explosives unattended, which
of the following actions should they take to comply with safety regulations?
Park the vehicle in a residential area.
Leave the vehicle running while unattended.
Leave the vehicle in any parking lot.
Park the vehicle in an approved safe haven.
3. Describe the significance of having a designated safe haven for vehicles
transporting hazardous materials.
A designated safe haven is only necessary for vehicles transporting
non-hazardous materials.
A designated safe haven allows any vehicle to park without
restrictions.
A designated safe haven is a location where drivers can rest without
concern for their cargo.
A designated safe haven ensures that unattended vehicles loaded
with hazardous materials are parked in a secure location to prevent
, accidents and unauthorized access.
4. What is the requirement for stopping at a railroad crossing when transporting
Division 4.3 materials?
It is impossible to tell without more information.
Yes.
Yes, but only if the arm is down telling vehicles to stop.
No.
5. If a shipping company mistakenly labels a non-hazardous material with a
hazard class identification number, what potential consequences could
arise?
Improved safety during transport.
No consequences as it is a minor error.
Increased risk of accidents and regulatory penalties.
Easier identification for emergency responders.
6. What is the primary purpose of placarding a vehicle transporting hazardous
materials?
communicate
take away
elevate
minimize
7. Why is it important to check the tires on a placarded trailer at the start of
each trip and every time you stop?
To maintain the aesthetic appearance of the trailer.
, k To improve fuel efficiency during the trip.
k k k k k k
k To ensure safety and compliance with regulations regarding
k k k k k k k
k hazardous materials transport. k k
k To reduce wear and tear on the tires.
k k k k k k k
8. If a transport vehicle is equipped with floor liners made of plastic instead of
k k k k k k k k k k k k k
stainless steel, non-ferrous metal, or carbon steel, what potential risks could
k k k k k k k k k k k
arise when transporting Division 1.1 or 1.2 materials?
k k k k k k k k
k Reduced transportation costs k k
k Increased risk of chemical reactions or leaks k k k k k k
k Enhanced visibility of hazardous materials k k k k
k Improved weight distribution k k
9. Describe the key characteristics that differentiate cargo tanks from portable
k k k k k k k k k
tanks.
k
k Cargo tanks are used only for liquids, whereas portable tanks can hold
k k k k k k k k k k k
k solids.
k Cargo tanks are smaller than portable tanks.k k k k k k
k Cargo tanks are permanently attached to vehicles, while portable
k k k k k k k k
tanks can be temporarily attached and filled on or off the vehicle.
k k k k k k k k k k k k
k Cargo tanks require special permits, while portable tanks do not.
k k k k k k k k k
10. Why is it important to know the hazard class of a substance when
k k k k k k k k k k k k
transportinghazardousmaterials?
k k k
k The hazard class is only relevant for emergency responders, not
k k k k k k k k k
k transporters.
k The hazard class determines the color of the placards used.
k k k k k k k k k
Graded A+
1. If a company decides to use a stainless steel floor liner for transporting
Division 1.1 explosives, what potential issue could arise?
The transport will be delayed due to inspections.
A chemical reaction could occur, leading to safety hazards.
There will be no issues as stainless steel is a strong material.
The explosives will be more secure during transport.
2. If a driver must leave their vehicle loaded with explosives unattended, which
of the following actions should they take to comply with safety regulations?
Park the vehicle in a residential area.
Leave the vehicle running while unattended.
Leave the vehicle in any parking lot.
Park the vehicle in an approved safe haven.
3. Describe the significance of having a designated safe haven for vehicles
transporting hazardous materials.
A designated safe haven is only necessary for vehicles transporting
non-hazardous materials.
A designated safe haven allows any vehicle to park without
restrictions.
A designated safe haven is a location where drivers can rest without
concern for their cargo.
A designated safe haven ensures that unattended vehicles loaded
with hazardous materials are parked in a secure location to prevent
, accidents and unauthorized access.
4. What is the requirement for stopping at a railroad crossing when transporting
Division 4.3 materials?
It is impossible to tell without more information.
Yes.
Yes, but only if the arm is down telling vehicles to stop.
No.
5. If a shipping company mistakenly labels a non-hazardous material with a
hazard class identification number, what potential consequences could
arise?
Improved safety during transport.
No consequences as it is a minor error.
Increased risk of accidents and regulatory penalties.
Easier identification for emergency responders.
6. What is the primary purpose of placarding a vehicle transporting hazardous
materials?
communicate
take away
elevate
minimize
7. Why is it important to check the tires on a placarded trailer at the start of
each trip and every time you stop?
To maintain the aesthetic appearance of the trailer.
, k To improve fuel efficiency during the trip.
k k k k k k
k To ensure safety and compliance with regulations regarding
k k k k k k k
k hazardous materials transport. k k
k To reduce wear and tear on the tires.
k k k k k k k
8. If a transport vehicle is equipped with floor liners made of plastic instead of
k k k k k k k k k k k k k
stainless steel, non-ferrous metal, or carbon steel, what potential risks could
k k k k k k k k k k k
arise when transporting Division 1.1 or 1.2 materials?
k k k k k k k k
k Reduced transportation costs k k
k Increased risk of chemical reactions or leaks k k k k k k
k Enhanced visibility of hazardous materials k k k k
k Improved weight distribution k k
9. Describe the key characteristics that differentiate cargo tanks from portable
k k k k k k k k k
tanks.
k
k Cargo tanks are used only for liquids, whereas portable tanks can hold
k k k k k k k k k k k
k solids.
k Cargo tanks are smaller than portable tanks.k k k k k k
k Cargo tanks are permanently attached to vehicles, while portable
k k k k k k k k
tanks can be temporarily attached and filled on or off the vehicle.
k k k k k k k k k k k k
k Cargo tanks require special permits, while portable tanks do not.
k k k k k k k k k
10. Why is it important to know the hazard class of a substance when
k k k k k k k k k k k k
transportinghazardousmaterials?
k k k
k The hazard class is only relevant for emergency responders, not
k k k k k k k k k
k transporters.
k The hazard class determines the color of the placards used.
k k k k k k k k k
