1|Page
,FIRE INSPECTOR DUTIES & RESPONSIBILITIES
Q1. Which duty is NOT the responsibility of a Level I Inspector?
A) Handle citizen complaints related to fire and life safety
B) Perform plans reviews
C) Interpret and apply adopted codes and standards
D) Determine occupancy loads for single-use buildings
Answer: B
Plans review is typically a Level II or higher function. Level I inspectors handle citizen complaints,
interpret codes, and determine occupancy loads for single-use buildings.
Q2. What is the PRIMARY purpose of a fire inspection under the TCFP Fire Inspector I certification
standards?
A) To issue citations for violations
B) To identify and correct fire hazards
C) To collect revenue for the jurisdiction
D) To document building occupancy
Answer: B
The primary purpose is to identify and correct fire hazards to protect life and property. Enforcement
actions are secondary to the goal of achieving compliance and safety.
Q3. A private fire safety inspector may evaluate processes in facilities that are:
A) Owned by the government
B) Insured or underwritten by an insurance company
C) Open to the public
D) Under construction
Answer: B
Private fire safety inspectors serve as risk assessors for facilities that are insured or underwritten by
insurance companies.
2|Page
,Q4. Which of the following is NOT a responsibility of a Level I Inspector?
A) Conducting fire and life safety inspections of new and existing structures
B) Performing plans review for complex commercial buildings
C) Interpreting and applying adopted codes and standards
D) Determining occupancy loads for single-use buildings
Answer: B
Performing plans review for complex commercial buildings is typically reserved for Level II inspectors or
higher.
Q5. Level I inspectors must be able to perform fire and life safety inspections of:
A) Only new structures
B) Only existing structures
C) New and existing structures
D) Only residential structures
Answer: C
Level I inspectors are qualified to inspect both new and existing structures, though duties may vary
between organizations.
STANDARDS & CODE ORGANIZATIONS
Q6. Most of the consensus standards that relate to fire and life safety are developed by the following
organizations EXCEPT:
A) ASTM International
B) National Fire Protection Association (NFPA)
C) American National Standards Institute (ANSI)
D) Underwriters Laboratories (UL)
3|Page
, Answer: C
ANSI accredits standards developers but does not write standards itself. ASTM, NFPA, and UL are actively
involved in developing fire and life safety standards.
Q7. A independent, non-profit organization that tests products for their intended use and certifies
them as safe describes:
A) ASTM International
B) American National Standards Institute
C) Underwriters Laboratories Inc.
D) Standards Council of Canada
Answer: C
Underwriters Laboratories (UL) is an independent, non-profit organization that tests and certifies
products for safety.
Q8. What NFPA standard governs the standard for portable fire extinguishers?
A) NFPA 10
B) NFPA 13
C) NFPA 25
D) NFPA 72
Answer: A
NFPA 10 is the standard for portable fire extinguishers.
Q9. Foam water system design and installation requirements are regulated by:
A) NFPA 13
B) NFPA 13R
C) NFPA 25
D) NFPA 16
4|Page
,FIRE INSPECTOR DUTIES & RESPONSIBILITIES
Q1. Which duty is NOT the responsibility of a Level I Inspector?
A) Handle citizen complaints related to fire and life safety
B) Perform plans reviews
C) Interpret and apply adopted codes and standards
D) Determine occupancy loads for single-use buildings
Answer: B
Plans review is typically a Level II or higher function. Level I inspectors handle citizen complaints,
interpret codes, and determine occupancy loads for single-use buildings.
Q2. What is the PRIMARY purpose of a fire inspection under the TCFP Fire Inspector I certification
standards?
A) To issue citations for violations
B) To identify and correct fire hazards
C) To collect revenue for the jurisdiction
D) To document building occupancy
Answer: B
The primary purpose is to identify and correct fire hazards to protect life and property. Enforcement
actions are secondary to the goal of achieving compliance and safety.
Q3. A private fire safety inspector may evaluate processes in facilities that are:
A) Owned by the government
B) Insured or underwritten by an insurance company
C) Open to the public
D) Under construction
Answer: B
Private fire safety inspectors serve as risk assessors for facilities that are insured or underwritten by
insurance companies.
2|Page
,Q4. Which of the following is NOT a responsibility of a Level I Inspector?
A) Conducting fire and life safety inspections of new and existing structures
B) Performing plans review for complex commercial buildings
C) Interpreting and applying adopted codes and standards
D) Determining occupancy loads for single-use buildings
Answer: B
Performing plans review for complex commercial buildings is typically reserved for Level II inspectors or
higher.
Q5. Level I inspectors must be able to perform fire and life safety inspections of:
A) Only new structures
B) Only existing structures
C) New and existing structures
D) Only residential structures
Answer: C
Level I inspectors are qualified to inspect both new and existing structures, though duties may vary
between organizations.
STANDARDS & CODE ORGANIZATIONS
Q6. Most of the consensus standards that relate to fire and life safety are developed by the following
organizations EXCEPT:
A) ASTM International
B) National Fire Protection Association (NFPA)
C) American National Standards Institute (ANSI)
D) Underwriters Laboratories (UL)
3|Page
, Answer: C
ANSI accredits standards developers but does not write standards itself. ASTM, NFPA, and UL are actively
involved in developing fire and life safety standards.
Q7. A independent, non-profit organization that tests products for their intended use and certifies
them as safe describes:
A) ASTM International
B) American National Standards Institute
C) Underwriters Laboratories Inc.
D) Standards Council of Canada
Answer: C
Underwriters Laboratories (UL) is an independent, non-profit organization that tests and certifies
products for safety.
Q8. What NFPA standard governs the standard for portable fire extinguishers?
A) NFPA 10
B) NFPA 13
C) NFPA 25
D) NFPA 72
Answer: A
NFPA 10 is the standard for portable fire extinguishers.
Q9. Foam water system design and installation requirements are regulated by:
A) NFPA 13
B) NFPA 13R
C) NFPA 25
D) NFPA 16
4|Page
