Power Engineering 3A2 ch1 Test
Questions and Answers.
What code regulates Process Piping?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. ASME B31.3. - Answer E
What code contains Recommended Guidelines For The Care of Power Boilers?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA 1001. - Answer D
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with
examples of each classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating
and air conditioning equipment and systems, and related equipment.
4. To promote uniform requirements among the provinces and territories.
Select one:
A. 1, 2
B. 1, 3
C. 2, 4
D. 3, 4
E. 1, 4 - Answer D
What is the focus of the Engineers Regulations in a typical Boiler and Pressure Vessels Act?
Select one:
, A. To state the minimum qualifications necessary to obtain each class of Power Engineer
certification.
B. To control process operations
C. To decide who will be Chief Engineer
D. To regulate safe handling of fired equipment.
E. To limit the number of engineers. - Answer A
Clear definitions for terms and equipment relating to refrigeration and air conditioning
equipment are defined in the _____.
Select one:
A. CSA-B51
B. CSA-B52
C. ASME Section I
D. ASME Section VII
E. NFPA 1001 - Answer B
3A2 01 04 Most, if not all Jurisdictions, require boilers and pressure vessels to be inspected
during fabrication by an inspector holding a:
Select one:
A. National Board commission.
B. Degree in Mechanical Engineering.
C. First Class Engineers Certificate.
D. Second Class Engineers Certificate.
E. Third Class Engineers Certificate. - Answer A
What standard regulates Mechanical Refrigeration Code?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA. - Answer A
What tables are found in the "Tables" section of the B-51 code?
1. Categories of fittings.
2. Minimum dimensions of blowoff vessels.
Questions and Answers.
What code regulates Process Piping?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. ASME B31.3. - Answer E
What code contains Recommended Guidelines For The Care of Power Boilers?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA 1001. - Answer D
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with
examples of each classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating
and air conditioning equipment and systems, and related equipment.
4. To promote uniform requirements among the provinces and territories.
Select one:
A. 1, 2
B. 1, 3
C. 2, 4
D. 3, 4
E. 1, 4 - Answer D
What is the focus of the Engineers Regulations in a typical Boiler and Pressure Vessels Act?
Select one:
, A. To state the minimum qualifications necessary to obtain each class of Power Engineer
certification.
B. To control process operations
C. To decide who will be Chief Engineer
D. To regulate safe handling of fired equipment.
E. To limit the number of engineers. - Answer A
Clear definitions for terms and equipment relating to refrigeration and air conditioning
equipment are defined in the _____.
Select one:
A. CSA-B51
B. CSA-B52
C. ASME Section I
D. ASME Section VII
E. NFPA 1001 - Answer B
3A2 01 04 Most, if not all Jurisdictions, require boilers and pressure vessels to be inspected
during fabrication by an inspector holding a:
Select one:
A. National Board commission.
B. Degree in Mechanical Engineering.
C. First Class Engineers Certificate.
D. Second Class Engineers Certificate.
E. Third Class Engineers Certificate. - Answer A
What standard regulates Mechanical Refrigeration Code?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA. - Answer A
What tables are found in the "Tables" section of the B-51 code?
1. Categories of fittings.
2. Minimum dimensions of blowoff vessels.
