CSX Freight Conductor Test 2 Questions and Answers with Verified
Solutions | Latest 2026 Update
Q: identify the clearance point what should you do to determine the clearance
point?
Answer:
Standing outside the rail at the end of the crosstie of the connecting track extend arm
toward the equipment then identify the point where the equipment can no longer be
touched, position your equipment an additional 50 ft car length into track
Q: What must happen when you are directing a shove movement and there is doubt
with the meaning of instructions?
Answer:
All Movements be stopped immediately
Q: After coupling to a line of cars you are instructed to shove what must you do?
Answer:
Stretch the slack
,CSX Freight Conductor Test 2 Questions and Answers with Verified
Solutions | Latest 2026 Update
Q: When shoving equipment what must be done?
Answer:
Select all that apply 1) Visually protected by a qualified employee 2) Being
positioned on the leading end or on the ground ahead of the movement clear of all
tracks
Q: When at industries what should you do?
Answer:
Select all that apply 1) Movements must only be made when gates, doors, or other
such devices are fully opened and fastened 2) Do not make movements on a portion
of track when dirt, sand, gravel, or other debris covers the rail or obstructs the flange
way of vehicular or pedestrian crossings
Q: What must you ensure before releasing the hand brakes on a line of cars?
Answer:
They are coupled to the locomotive
, CSX Freight Conductor Test 2 Questions and Answers with Verified
Solutions | Latest 2026 Update
Q: You are working in dark territory and threw a hand operated switch, What must
be done once the switch is restored?
Answer:
Verbally confirm all crewmembers and affected personnel that the switch has been
restored and locked in normal position or that the switch will be left in the reverse
position as authorized by the dispatcher
Q: What is the normal position of hand operated switches on the main track?
Answer:
Lined for straight movement
Q: After operating a switch or derail what must the employee make certain of?
Answer:
Select all that apply 1) Device is lined for the intended movement 2) if equipped with
a lock, device is locked before being left unattended
Solutions | Latest 2026 Update
Q: identify the clearance point what should you do to determine the clearance
point?
Answer:
Standing outside the rail at the end of the crosstie of the connecting track extend arm
toward the equipment then identify the point where the equipment can no longer be
touched, position your equipment an additional 50 ft car length into track
Q: What must happen when you are directing a shove movement and there is doubt
with the meaning of instructions?
Answer:
All Movements be stopped immediately
Q: After coupling to a line of cars you are instructed to shove what must you do?
Answer:
Stretch the slack
,CSX Freight Conductor Test 2 Questions and Answers with Verified
Solutions | Latest 2026 Update
Q: When shoving equipment what must be done?
Answer:
Select all that apply 1) Visually protected by a qualified employee 2) Being
positioned on the leading end or on the ground ahead of the movement clear of all
tracks
Q: When at industries what should you do?
Answer:
Select all that apply 1) Movements must only be made when gates, doors, or other
such devices are fully opened and fastened 2) Do not make movements on a portion
of track when dirt, sand, gravel, or other debris covers the rail or obstructs the flange
way of vehicular or pedestrian crossings
Q: What must you ensure before releasing the hand brakes on a line of cars?
Answer:
They are coupled to the locomotive
, CSX Freight Conductor Test 2 Questions and Answers with Verified
Solutions | Latest 2026 Update
Q: You are working in dark territory and threw a hand operated switch, What must
be done once the switch is restored?
Answer:
Verbally confirm all crewmembers and affected personnel that the switch has been
restored and locked in normal position or that the switch will be left in the reverse
position as authorized by the dispatcher
Q: What is the normal position of hand operated switches on the main track?
Answer:
Lined for straight movement
Q: After operating a switch or derail what must the employee make certain of?
Answer:
Select all that apply 1) Device is lined for the intended movement 2) if equipped with
a lock, device is locked before being left unattended
