BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: What is the verbiage would you say if you need to ask a train to change an
established route?
Answer:
what verbiage would you use? AKA: if you need to take a signal back on a closely
approaching train, what would you ask? Can the engineer comply with a signal
change to stop. Engineer must identify themselves by name and that same exact thing
that I asked them.
Q: If I looked at a Mile Post and it has an X or Z at the end of it...what does that
mean?
Answer:
i.e., 9.2x duplicate Mile Post
Q: What are the two ways to get authority in CTC?
Answer:
What are the three authorities in TWC? CTC - signal indication & verbal authority
from the train dispatcher TWC- Track warrant, Restricted Limits & Yard limits
,BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: What are the three verbal authorities in CTC?
Answer:
10.1 - authority to enter the main track 10.3 - Track and Time 9.12.1- authority to
pass stop signal indication
Q: If a train dispatcher is looking at a Timetable and looking at a station it shows a
J,B & T. What do these abbreviations mean?
Answer:
J - Junction B - General Orders, Notices, and Circulars T - Turning Facility
Q: What is the definition of Main Track?
Answer:
A track extending through yards and between stations, that must not be occupied
without authority or protection.
,BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: Main Track
Answer:
A track extending through yards and between stations that must not be
occupied without authority or protection.
Q: What is a movement opposite the authorized direction?
Answer:
Reverse movement
Q: if i needed to identify a train, how would i do that on BNSF Railway?
Answer:
Initials, engine number, & direction where applicable
, BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: When may main track switches be left open in CTC?
Answer:
When may main track switches be left open in TWC? When may main track switches
be left in both of those? CTC - Track and Time TWC - Track warrant - granted
permission to leave it in the reverse position (box 13) Both -if they leave a crew
member or a switch tender at the switch
Q: What type of train requires only one crew member to verify a track release/roll
up of a track warrant?
Answer:
Passenger train
2026 Update
Q: What is the verbiage would you say if you need to ask a train to change an
established route?
Answer:
what verbiage would you use? AKA: if you need to take a signal back on a closely
approaching train, what would you ask? Can the engineer comply with a signal
change to stop. Engineer must identify themselves by name and that same exact thing
that I asked them.
Q: If I looked at a Mile Post and it has an X or Z at the end of it...what does that
mean?
Answer:
i.e., 9.2x duplicate Mile Post
Q: What are the two ways to get authority in CTC?
Answer:
What are the three authorities in TWC? CTC - signal indication & verbal authority
from the train dispatcher TWC- Track warrant, Restricted Limits & Yard limits
,BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: What are the three verbal authorities in CTC?
Answer:
10.1 - authority to enter the main track 10.3 - Track and Time 9.12.1- authority to
pass stop signal indication
Q: If a train dispatcher is looking at a Timetable and looking at a station it shows a
J,B & T. What do these abbreviations mean?
Answer:
J - Junction B - General Orders, Notices, and Circulars T - Turning Facility
Q: What is the definition of Main Track?
Answer:
A track extending through yards and between stations, that must not be occupied
without authority or protection.
,BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: Main Track
Answer:
A track extending through yards and between stations that must not be
occupied without authority or protection.
Q: What is a movement opposite the authorized direction?
Answer:
Reverse movement
Q: if i needed to identify a train, how would i do that on BNSF Railway?
Answer:
Initials, engine number, & direction where applicable
, BNSF Exam 2 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: When may main track switches be left open in CTC?
Answer:
When may main track switches be left open in TWC? When may main track switches
be left in both of those? CTC - Track and Time TWC - Track warrant - granted
permission to leave it in the reverse position (box 13) Both -if they leave a crew
member or a switch tender at the switch
Q: What type of train requires only one crew member to verify a track release/roll
up of a track warrant?
Answer:
Passenger train
