BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: Which of the following is a form of authority for MW employees to work on a
main track?
Answer:
(MW 6.3.1) Track bulletin Form B
Q: Off-track equipment is defined as machines that may be operated on the
right-of-way foul of
Answer:
the track, and includes tractors, scrapers, graders, cranes, trucks, and similar
equipment. (MW-
GL) True
Q: What type of protection do outfit cars require where remotely controlled
switches provide access to that track?
Answer:
(5.12) Control operator will provide and maintain blocking for protection
,BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: Within CTC limits (unless track bulletin Form B is in effect), when a switch is
under repair
Answer:
(9.5.3) Display Stop indications for all affected routes and block any controls to
prevent their
operation.
Q: When a train is granted Track and Time, no movement may be made until:
(10.3)
Answer:
Engineer
understands the Track and Time granted
,BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: When a series of locations requiring reduced speeds are so closely spaced that
the green flags
Answer:
will overlap the yellow flags: (MW 5.4.5) Only one green flag will be placed at the
last speed
restriction.
Q: At a manual interlocking, if a train is stopped at a Stop signal and no conflicting
movement is
Answer:
evident, a crew member must immediately: (9.12.2) Contact the control operator.
, BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: In CTC territory, a train must not clear any track at a hand operated switch that
is not equipped
Answer:
with an electric lock unless: (10.2) Such switch is kept open or maximum authorized
speed
does not exceed 20 MPH on main track or controlled siding equipped with
intermediate signal
Q: What is a length of track between consecutive block signals or between a block
signal and the end of block system limits?
Answer:
(GL) Block
Q: Before granting Track and Time, the control operator must apply blocking or
marking devices to
Answer:
control machine. (10.3.1) True
2026 Update
Q: Which of the following is a form of authority for MW employees to work on a
main track?
Answer:
(MW 6.3.1) Track bulletin Form B
Q: Off-track equipment is defined as machines that may be operated on the
right-of-way foul of
Answer:
the track, and includes tractors, scrapers, graders, cranes, trucks, and similar
equipment. (MW-
GL) True
Q: What type of protection do outfit cars require where remotely controlled
switches provide access to that track?
Answer:
(5.12) Control operator will provide and maintain blocking for protection
,BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: Within CTC limits (unless track bulletin Form B is in effect), when a switch is
under repair
Answer:
(9.5.3) Display Stop indications for all affected routes and block any controls to
prevent their
operation.
Q: When a train is granted Track and Time, no movement may be made until:
(10.3)
Answer:
Engineer
understands the Track and Time granted
,BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: When a series of locations requiring reduced speeds are so closely spaced that
the green flags
Answer:
will overlap the yellow flags: (MW 5.4.5) Only one green flag will be placed at the
last speed
restriction.
Q: At a manual interlocking, if a train is stopped at a Stop signal and no conflicting
movement is
Answer:
evident, a crew member must immediately: (9.12.2) Contact the control operator.
, BNSF Test 6 Questions and Answers with Verified Solutions | Latest
2026 Update
Q: In CTC territory, a train must not clear any track at a hand operated switch that
is not equipped
Answer:
with an electric lock unless: (10.2) Such switch is kept open or maximum authorized
speed
does not exceed 20 MPH on main track or controlled siding equipped with
intermediate signal
Q: What is a length of track between consecutive block signals or between a block
signal and the end of block system limits?
Answer:
(GL) Block
Q: Before granting Track and Time, the control operator must apply blocking or
marking devices to
Answer:
control machine. (10.3.1) True
