Millwright Couplings and Clutches Exam
Questions and Answers with Verified
Solutions | Latest Updated 2026
__________ couplings require D. Rigid
positive Sleeve, flanged clamped
positioning of the shaft
A. Universal
B. Flexible
C. Centrifugal
D. Rigid
__________ Which permit slight B. Flexible
misalignment and endplay of the
shaft
A. Universal
B. Flexible
C. Centrifugal
D. Rigid
Universal joints which connects C. Offset
shafts with angular and/or shaft
_______________ misalignment
A. Clearance
B. Run out
C. Offset
D. Axial
,______________ couplings are Centrifugal
used when
the drive is required to reach a
certain speed before engaging.
Also
considered to be clutches.
A. Universal
B. Flexible
C. Centrifugal
D. Rigid
__________ couplings are D. Heat up
designed to
connect two Shafts in a fixed
position. They may only be used
with
offset misalignment is less than
bearing clearance, there is NO
angular misalignment and
machines
do not _______
A. Move
B. Expand
C. Contract
D. Heat up
Rigid couplings may be B. Sleeve, flanged, clamped
A. Sleeve, brake, clutch
B. Sleeve, flange, clamped
C. Clamped, clutch, brake
D. Bolted, fixed, adjustable
, Sleeve couplings are used where Assembly and disassembly is not off the
A. The conditions are dusty duff
B. Operating conditions have lots
of
stops starts
C. Assembly and disassembly is
not
often done
D. Assembly and disassembly is
often
done
A compression coupling is a type C. Light load, light torque
of
flanged coupling. There is no other
driving means other than the
compression on the shaft of the
tapered bore. Due to this
requirement they are usually used
for
A. Heavy load, light torque
B. Light torque, heavy weight
C. Light load, light torque
D. Tapered applications only
Rigid or ribbed compression D. Clamp or muff
couplings are called
A. Source
B. Compression tight
C. Compression loose
D. Clamp or muff
Questions and Answers with Verified
Solutions | Latest Updated 2026
__________ couplings require D. Rigid
positive Sleeve, flanged clamped
positioning of the shaft
A. Universal
B. Flexible
C. Centrifugal
D. Rigid
__________ Which permit slight B. Flexible
misalignment and endplay of the
shaft
A. Universal
B. Flexible
C. Centrifugal
D. Rigid
Universal joints which connects C. Offset
shafts with angular and/or shaft
_______________ misalignment
A. Clearance
B. Run out
C. Offset
D. Axial
,______________ couplings are Centrifugal
used when
the drive is required to reach a
certain speed before engaging.
Also
considered to be clutches.
A. Universal
B. Flexible
C. Centrifugal
D. Rigid
__________ couplings are D. Heat up
designed to
connect two Shafts in a fixed
position. They may only be used
with
offset misalignment is less than
bearing clearance, there is NO
angular misalignment and
machines
do not _______
A. Move
B. Expand
C. Contract
D. Heat up
Rigid couplings may be B. Sleeve, flanged, clamped
A. Sleeve, brake, clutch
B. Sleeve, flange, clamped
C. Clamped, clutch, brake
D. Bolted, fixed, adjustable
, Sleeve couplings are used where Assembly and disassembly is not off the
A. The conditions are dusty duff
B. Operating conditions have lots
of
stops starts
C. Assembly and disassembly is
not
often done
D. Assembly and disassembly is
often
done
A compression coupling is a type C. Light load, light torque
of
flanged coupling. There is no other
driving means other than the
compression on the shaft of the
tapered bore. Due to this
requirement they are usually used
for
A. Heavy load, light torque
B. Light torque, heavy weight
C. Light load, light torque
D. Tapered applications only
Rigid or ribbed compression D. Clamp or muff
couplings are called
A. Source
B. Compression tight
C. Compression loose
D. Clamp or muff
