Millwright Belt Drives Exam Questions and Answers with Verified Solutions | Latest Updated 2026

Millwright Belt Drives Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026



The amount of power that a belt C. Grip
drive can transmit is directly
related
to the _________ of the belt on
the
pulley
A. Tension
B. Friction
C. Grip
D. Angle


Alignment of shaft center lines of Alignment of shaft center lines of pulleys
pulleys and ensuring all shafts are and
parallel to the driven shaft are two ensuring all shafts are parallel to the driven
main purposes of alignment shaft
are two main purposes of alignment


Store belts in cool dry place. d. synthetic
Unless
the belts are ________. Then
store in
cool humid place.
a. steel
b. rubber
c. cord
d. synthetic

, The grip of the belt on the pulley A. Area of contact
depends on Materials of belt and pulley
A. Area, materials, tension Tension
B. Area, tension, angle
C. Angle, materials, tension
D. Angle, tension, materials


The area of contact between the B. Arc
belt
and pulley surfaces depends on
the
belt width and the _________ of
contact
A. Area
B. Arc
C. Distance
D. Angle


The arc of contact depends on C. Take up
pulley diameter centre to centre **take up Means to tension of belt by
distance and the ________ moving the
devices used. prime mover and or using an idler
A. Machines
B. Count
C. Take up
D. Soft foot


Belt tension is the amount of D. Stretch
_________
applied to the belt.
A. Material
B. Offset
C. Pull
D. Stretch