TTT1-Key Exam Concepts With Insightful
Answers 2025\2026 A+ Grade
What are the three main components that make up a fall arrest system?
- accurate answers-Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not
yet publicized the specific regulations?
- accurate answers-Employer
When should safety glasses be worn?
- accurate answers-When grinding steel
Monopole components are identified as:
- accurate answers-Base Flange
The following term is used to describe rules written by the Department of
Labor:
- accurate answers-Regulations
Which government organization regulates tower lighting?
- accurate answers-FAA
What does the person operating the Capstan need a clear view of?
- accurate answers-The load and signal person
T/F: You should use a carabiner when lifting loads?
- accurate answers-False
The four most common types of structures used to support antennas are:
- accurate answers-Self-Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active?
- accurate answers-True
The following piece of equipment can be used to power an electric Capstan
when an electrical outlet is not available:
- accurate answers-Generator
, What is the heel block used for?
- accurate answers-To change the direction of the load, jump or tag line from
horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the
__________ once the lifting path is determined.
- accurate answers-Lifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna
- accurate answers-True
What is the most common power source used with a Capstan Hoist?
- accurate answers-Electrical power
When using an extension ladder, how many feet past the platform must the
ladder extend?
- accurate answers-3 feet
A Capstan hoist should be inspected __________ before use?
- accurate answers-Daily
A vertical life line should have a minimum breaking strength of how many
pounds?
- accurate answers-5,000 lbs
What do the letters LOTO stand for?
- accurate answers-Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast
antennas, overexposure is almost always a problem.
- accurate answers-True
T/F: An RF monitor should be worn in areas of unknown RF exposure.
- accurate answers-True
The minimum force that a work positioning system anchorage must be able to
withstand is:
- accurate answers-2 time the arresting force of 3,000 lbs.
Answers 2025\2026 A+ Grade
What are the three main components that make up a fall arrest system?
- accurate answers-Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not
yet publicized the specific regulations?
- accurate answers-Employer
When should safety glasses be worn?
- accurate answers-When grinding steel
Monopole components are identified as:
- accurate answers-Base Flange
The following term is used to describe rules written by the Department of
Labor:
- accurate answers-Regulations
Which government organization regulates tower lighting?
- accurate answers-FAA
What does the person operating the Capstan need a clear view of?
- accurate answers-The load and signal person
T/F: You should use a carabiner when lifting loads?
- accurate answers-False
The four most common types of structures used to support antennas are:
- accurate answers-Self-Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active?
- accurate answers-True
The following piece of equipment can be used to power an electric Capstan
when an electrical outlet is not available:
- accurate answers-Generator
, What is the heel block used for?
- accurate answers-To change the direction of the load, jump or tag line from
horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the
__________ once the lifting path is determined.
- accurate answers-Lifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna
- accurate answers-True
What is the most common power source used with a Capstan Hoist?
- accurate answers-Electrical power
When using an extension ladder, how many feet past the platform must the
ladder extend?
- accurate answers-3 feet
A Capstan hoist should be inspected __________ before use?
- accurate answers-Daily
A vertical life line should have a minimum breaking strength of how many
pounds?
- accurate answers-5,000 lbs
What do the letters LOTO stand for?
- accurate answers-Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast
antennas, overexposure is almost always a problem.
- accurate answers-True
T/F: An RF monitor should be worn in areas of unknown RF exposure.
- accurate answers-True
The minimum force that a work positioning system anchorage must be able to
withstand is:
- accurate answers-2 time the arresting force of 3,000 lbs.
