TTT-1 Key Concepts With Accurate Solutions
2025\2026 A+ Grade
1. When completing a visual inspection of a foundation, what are one of the
key items to look for?
- accurate answers-D. Cracks
2. What term is used to describe the rules written by the department of labor?
- accurate answers-B. Standards
3. What is the purpose of a turnbuckle when working with guy wires?
- accurate answers-C Tensioning
4. The basket slings on a pole perform what function?
- accurate answers-C. Support all the combined weight
5. A synthetic rope has a breaking strength of 6,600 pounds and a bowline
knot is tied to make a lifting eye, what is the maximum gross load that can be
lifted?
- accurate answers-D. 660 Ibs
6. When working how often should fall protection equipment be inspected?
- accurate answers-A. Daily before use
7. When a U-bolt is properly tightened, what is the result?
- accurate answers-A. Both sides are tightened evenly
8. When using bolts or U-bolts with a slotted hole present, in what order are
the components installed
- accurate answers-A. Flat washer, Lock washer, nut
9. If the wire rope load line on a base mounted hoist has a breaking strength of
26,500 pounds, what is my actual Working Load Limit (WLL)
- accurate answers-C. 5,300
10. Who is responsible for providing the applicable PPE for a work site?
- accurate answers-B. Employer
, 11. What equipment does an operator use?
- accurate answers-C. Winches, cranes, and other applicable units
12. When using an extension ladder, how many feet past the platform must it
extend
- accurate answers-C. 3 feet
13. For power lines rated 50kV, the maximum clearance between the lines and
any part of the crane or load shall be?
- accurate answers-A. 10 feet
14. What motion indicates retract the boom
- accurate answers-B
15. In the fall protection hierarchy system, what is the term used for stopping
free fall?
- accurate answers-D Fall Arrest
16. What is the most common power source used for a capstan hoist?
- accurate answers-B Electric Power
17. The cantilever, by definition, is the distance between the bridle slings and
rooster head sheave true or false?
- accurate answers-A true
18. What is a crown block?
- accurate answers-B An upper sheave assembly on top of a structure
19. If you have a sixteen foot ladder leaning against a building wall, how many
feet from the wall does the base need to be to provide the correct slope?
- accurate answers-C 4 feet
20.at a minimum, how often must a competent rescuer have refresher
training?
- accurate answers-A 1 year
21. An antenna that can transmit signals up to 360 degrees is called?
- accurate answers-B Omni-directional
2025\2026 A+ Grade
1. When completing a visual inspection of a foundation, what are one of the
key items to look for?
- accurate answers-D. Cracks
2. What term is used to describe the rules written by the department of labor?
- accurate answers-B. Standards
3. What is the purpose of a turnbuckle when working with guy wires?
- accurate answers-C Tensioning
4. The basket slings on a pole perform what function?
- accurate answers-C. Support all the combined weight
5. A synthetic rope has a breaking strength of 6,600 pounds and a bowline
knot is tied to make a lifting eye, what is the maximum gross load that can be
lifted?
- accurate answers-D. 660 Ibs
6. When working how often should fall protection equipment be inspected?
- accurate answers-A. Daily before use
7. When a U-bolt is properly tightened, what is the result?
- accurate answers-A. Both sides are tightened evenly
8. When using bolts or U-bolts with a slotted hole present, in what order are
the components installed
- accurate answers-A. Flat washer, Lock washer, nut
9. If the wire rope load line on a base mounted hoist has a breaking strength of
26,500 pounds, what is my actual Working Load Limit (WLL)
- accurate answers-C. 5,300
10. Who is responsible for providing the applicable PPE for a work site?
- accurate answers-B. Employer
, 11. What equipment does an operator use?
- accurate answers-C. Winches, cranes, and other applicable units
12. When using an extension ladder, how many feet past the platform must it
extend
- accurate answers-C. 3 feet
13. For power lines rated 50kV, the maximum clearance between the lines and
any part of the crane or load shall be?
- accurate answers-A. 10 feet
14. What motion indicates retract the boom
- accurate answers-B
15. In the fall protection hierarchy system, what is the term used for stopping
free fall?
- accurate answers-D Fall Arrest
16. What is the most common power source used for a capstan hoist?
- accurate answers-B Electric Power
17. The cantilever, by definition, is the distance between the bridle slings and
rooster head sheave true or false?
- accurate answers-A true
18. What is a crown block?
- accurate answers-B An upper sheave assembly on top of a structure
19. If you have a sixteen foot ladder leaning against a building wall, how many
feet from the wall does the base need to be to provide the correct slope?
- accurate answers-C 4 feet
20.at a minimum, how often must a competent rescuer have refresher
training?
- accurate answers-A 1 year
21. An antenna that can transmit signals up to 360 degrees is called?
- accurate answers-B Omni-directional
