PA APPRAISAL LICENSE FINAL PAPER 2026
COMPLETE ANSWERS AND STUDY GUIDE
APPRAISER CERTIFICATION MASTERPACK
◉ When removing a door skin, Technician A says an air chisel should
be used to separate the welded door skin from the door skin hem
flange. Technician B says a grinder should be used to grind away the
edge of the door skin. Who is right?
Select the Correct Answer
Technician A is correct
Technician B is correct
Both technicians are correct
Neither technicians are correct
Answer: Technician B is correct is correct.
Explanation:
An air chisel would cause too much damage to the door skin hem
flange. The proper method is to use a grinder.
,◉ Which of the following terms supports insurable interest?
Select the Correct Answer
Actual cash value
Indemnity
Replacement cost
Fair market value
Answer: Indemnity is correct.
Explanation:
Insurable interest is economic interest; having a financial stake in
property; having something to lose in property. When you own
property, have property of others in your possession, or have legal
title to property, you have an insurable interest. If there is a covered
loss, you will be indemnified or made who only to the extent of your
insurable interest and subject to the policy limits.
◉ In the four-stroke power cycle, what term describes the up motion
of the piston?
,Select the Correct Answer
Compression stroke
Intake stroke
Power stroke
Exhaust stroke
Answer: Compression stroke.
Explanation:
When the piston moves back up, it compresses the fuel/air mixture
into a small space between the top of the piston and the top of the
cylinder. This space is called the combustion chamber. This
movement is called the compression stroke.
◉ An automobile that has its substructure built into the front end
and body panels of the vehicle is called a:
Select the Correct Answer
, shell vehicle.
channel vehicle.
conventional frame vehicle.
unibody vehicle.
Answer: unibody vehicle. is correct.
Explanation:
A conventional frame vehicle has a separate substructure to which
the vehicle's front end, body and mechanical parts are bolted. There
is no such thing as a shell or channel vehicle. An automobile that has
its substructure built into the front end and body panels of the
vehicle is called a unibody vehicle.
◉ When reading the printout from a computerized measuring
system, it is discovered that the front rails are +22mm on the right
and -22mm on the left at the same position. Technician A says the
vehicle is swayed to the right. Technician B says the vehicle is
swayed to the left. Who is right?
COMPLETE ANSWERS AND STUDY GUIDE
APPRAISER CERTIFICATION MASTERPACK
◉ When removing a door skin, Technician A says an air chisel should
be used to separate the welded door skin from the door skin hem
flange. Technician B says a grinder should be used to grind away the
edge of the door skin. Who is right?
Select the Correct Answer
Technician A is correct
Technician B is correct
Both technicians are correct
Neither technicians are correct
Answer: Technician B is correct is correct.
Explanation:
An air chisel would cause too much damage to the door skin hem
flange. The proper method is to use a grinder.
,◉ Which of the following terms supports insurable interest?
Select the Correct Answer
Actual cash value
Indemnity
Replacement cost
Fair market value
Answer: Indemnity is correct.
Explanation:
Insurable interest is economic interest; having a financial stake in
property; having something to lose in property. When you own
property, have property of others in your possession, or have legal
title to property, you have an insurable interest. If there is a covered
loss, you will be indemnified or made who only to the extent of your
insurable interest and subject to the policy limits.
◉ In the four-stroke power cycle, what term describes the up motion
of the piston?
,Select the Correct Answer
Compression stroke
Intake stroke
Power stroke
Exhaust stroke
Answer: Compression stroke.
Explanation:
When the piston moves back up, it compresses the fuel/air mixture
into a small space between the top of the piston and the top of the
cylinder. This space is called the combustion chamber. This
movement is called the compression stroke.
◉ An automobile that has its substructure built into the front end
and body panels of the vehicle is called a:
Select the Correct Answer
, shell vehicle.
channel vehicle.
conventional frame vehicle.
unibody vehicle.
Answer: unibody vehicle. is correct.
Explanation:
A conventional frame vehicle has a separate substructure to which
the vehicle's front end, body and mechanical parts are bolted. There
is no such thing as a shell or channel vehicle. An automobile that has
its substructure built into the front end and body panels of the
vehicle is called a unibody vehicle.
◉ When reading the printout from a computerized measuring
system, it is discovered that the front rails are +22mm on the right
and -22mm on the left at the same position. Technician A says the
vehicle is swayed to the right. Technician B says the vehicle is
swayed to the left. Who is right?
