4th TSSA Part A (IV) | Exam Questions with Correct Answers and
Answers with Verified Solutions | Latest 2026 Update
Q: units?
Answer:
cubic centimeters per gram (4-020-2.8) If a substance goes through a process that
changes its composition so that it is no longer the same substance, then the substance
has undergone a: Chemical change (4-049-1.10) A typical application of forged steel
in a power plant is: Pipe fittings The Ultrasonic form of non-destructive examination
is done to find? surface discontinuities (4-018-2.1) The Second Law of
Thermodynamics states that, unaided, heat will only flow from a: Higher temperature
body to a lower temperature body.
, Q: (4-081-1.16) The output voltage of a shunt DC generator is varied by adjusting
the: Field rheostat (4-009-1.12) What force of gravity is acting on a 240kg mass?
Answer:
2 kN (4-038-1.12) What type of fire should be put out with water? Class "A" (
4-081-2.14) Synchronous motors are desirable because they can Improve the power
factor of a system (4-019-2.6) In the Steam Tables, the unit used for pressure is
_______ absolute. kPa (4-001-1.6) Unqualified individuals operating a power plant
or pressure plant risk the _____ of the plant and the general public. Safety
(4-078-3.8) Current flow is: Increases as the applied voltage increases If noise can't
be reduced to safe levels by getting a quieter machine or by using sound absorbing
materials around it, what can be done? Use hearing protection (4-039-2.1) if an area
contains hazardous concentrations of flammable gases or vapours under normal
operating conditions, electrical equipment must be designed for use in the area. This
is designated as: Class 1 (4-001-3.1) Committees that establish standards are
composed primarily of which of the following elements? Experts from the industry,
professional and insurance groups and all levels of government
Answers with Verified Solutions | Latest 2026 Update
Q: units?
Answer:
cubic centimeters per gram (4-020-2.8) If a substance goes through a process that
changes its composition so that it is no longer the same substance, then the substance
has undergone a: Chemical change (4-049-1.10) A typical application of forged steel
in a power plant is: Pipe fittings The Ultrasonic form of non-destructive examination
is done to find? surface discontinuities (4-018-2.1) The Second Law of
Thermodynamics states that, unaided, heat will only flow from a: Higher temperature
body to a lower temperature body.
, Q: (4-081-1.16) The output voltage of a shunt DC generator is varied by adjusting
the: Field rheostat (4-009-1.12) What force of gravity is acting on a 240kg mass?
Answer:
2 kN (4-038-1.12) What type of fire should be put out with water? Class "A" (
4-081-2.14) Synchronous motors are desirable because they can Improve the power
factor of a system (4-019-2.6) In the Steam Tables, the unit used for pressure is
_______ absolute. kPa (4-001-1.6) Unqualified individuals operating a power plant
or pressure plant risk the _____ of the plant and the general public. Safety
(4-078-3.8) Current flow is: Increases as the applied voltage increases If noise can't
be reduced to safe levels by getting a quieter machine or by using sound absorbing
materials around it, what can be done? Use hearing protection (4-039-2.1) if an area
contains hazardous concentrations of flammable gases or vapours under normal
operating conditions, electrical equipment must be designed for use in the area. This
is designated as: Class 1 (4-001-3.1) Committees that establish standards are
composed primarily of which of the following elements? Experts from the industry,
professional and insurance groups and all levels of government