4th TSSA Part B - Unit 1 | Exam Questions with Correct Answers and
Answers with Verified Solutions | Latest 2026 Update
Q: R4B01-02-02-03 Large journal or sleeve bearings have grooves: In the
non-pressure area
Answer:
R4B01-02-04-16 When grease is used in an antifriction bearing after cleaning, the
bearing
housing should not be filled _____ full. more than 1/3
R4B01-02-05-19 A common cause of antifriction bearing failure is: Shaft
misalignment
R4B01-02-05-21 A normal anti-friction bearing temperature operating range is: 65°C
to 70°C
R4B01-01-01-01 Where gear teeth inter-mesh[comma] a lubricant must provide
Shock
absorption
Answers with Verified Solutions | Latest 2026 Update
Q: R4B01-02-02-03 Large journal or sleeve bearings have grooves: In the
non-pressure area
Answer:
R4B01-02-04-16 When grease is used in an antifriction bearing after cleaning, the
bearing
housing should not be filled _____ full. more than 1/3
R4B01-02-05-19 A common cause of antifriction bearing failure is: Shaft
misalignment
R4B01-02-05-21 A normal anti-friction bearing temperature operating range is: 65°C
to 70°C
R4B01-01-01-01 Where gear teeth inter-mesh[comma] a lubricant must provide
Shock
absorption