CTS InfoComm Exam Questions and
Answers with Verified Solutions | Latest
Updated 2026
The measurement of color Kelvin
temperature is expressed in
_____.
What does a sightline study The most appropirate seating layout and
determine? screen
position.
In radio frequency transport, the Carrier
program signal is added to a ____
signal before transportation.
Which of the following statements Rear projection displays provide better
describes rear projection contrast
technology? and color saturation in high ambient light
environments than front projection
displays.
Which of the following statements They are used for speech applications,
about automatic mixers in audio such as
applicaitons is true? meetings.
A gate function automatically Fall below a set threshold.
mutes
all audio signals that ____.
,A distribution amplifier is used to Split one input into multiple isolated
____. outputs, each
with the same signal level.
What is a circuit's bandwidth? The range of frequencies a circuit can
detect.
A string's vibration or loudspeaker Generated
cone's movement pushing air
molecules forward demonstrates
how sound waves are ____.
What unit(s) are used for Ohms are used for both resistance and
quantifying impedance.
resistance and impedance?
Audio signals may be purposely Sound will reach all listeners at the same
delayed in sounds reinforcement time.
applications in order to ensure that
____.
Which of the following statements Unidirectional communication does not
accurately describes unidirectional verify the
control communications? receipt of commands.
If the resolution of an image is Increases
increased, the signal bandwidth
____.
If the color temperature is low, the Red.
light will appear to be more ____.
, What type of waves has the Ultraviolet
highest
frequency in the range of the
electromagnetic spectrum?
If an electronic frequency falls Lost
outside of a circuit's bandwidth,
that
frequency will be ____.
For a video display that requires 6
detailed veiwing, the position of
the
frarthes viewer should be no more
than ____ times the height of the
display away from the screen.
A light source's color temperature Tint
refers to it's ____.
If the brightness level of a display Gray
is
too high, the black areas of the
image will appear ____.
RF wireless microphones typically Frequency
allow the user to change ____ in
order
to avoid interference from outside
sources or other wireless
microphones.
Answers with Verified Solutions | Latest
Updated 2026
The measurement of color Kelvin
temperature is expressed in
_____.
What does a sightline study The most appropirate seating layout and
determine? screen
position.
In radio frequency transport, the Carrier
program signal is added to a ____
signal before transportation.
Which of the following statements Rear projection displays provide better
describes rear projection contrast
technology? and color saturation in high ambient light
environments than front projection
displays.
Which of the following statements They are used for speech applications,
about automatic mixers in audio such as
applicaitons is true? meetings.
A gate function automatically Fall below a set threshold.
mutes
all audio signals that ____.
,A distribution amplifier is used to Split one input into multiple isolated
____. outputs, each
with the same signal level.
What is a circuit's bandwidth? The range of frequencies a circuit can
detect.
A string's vibration or loudspeaker Generated
cone's movement pushing air
molecules forward demonstrates
how sound waves are ____.
What unit(s) are used for Ohms are used for both resistance and
quantifying impedance.
resistance and impedance?
Audio signals may be purposely Sound will reach all listeners at the same
delayed in sounds reinforcement time.
applications in order to ensure that
____.
Which of the following statements Unidirectional communication does not
accurately describes unidirectional verify the
control communications? receipt of commands.
If the resolution of an image is Increases
increased, the signal bandwidth
____.
If the color temperature is low, the Red.
light will appear to be more ____.
, What type of waves has the Ultraviolet
highest
frequency in the range of the
electromagnetic spectrum?
If an electronic frequency falls Lost
outside of a circuit's bandwidth,
that
frequency will be ____.
For a video display that requires 6
detailed veiwing, the position of
the
frarthes viewer should be no more
than ____ times the height of the
display away from the screen.
A light source's color temperature Tint
refers to it's ____.
If the brightness level of a display Gray
is
too high, the black areas of the
image will appear ____.
RF wireless microphones typically Frequency
allow the user to change ____ in
order
to avoid interference from outside
sources or other wireless
microphones.
