WRT Certification Exam
Questions and Answers Verified
Solutions Latest Update
(2026/2027)
Question:
__________ as soon as possible.
Answer:
respond quickly & mitigation
Question:
All restorers should follow the standard of care for the water restoration
profession developed
by the restoration industry entitled the IICRC ____.
Answer:
S500
Question:
To help protect technicians from the many hazards associated with
contaminated water losses,
restorers need to have ready access to several items. These items protect for
all _________
_________ to the body.
,Answer:
potential exposures
Question:
Respiratory protection regulations state that the employer must provide:
Answer:
1.
Medical evaluations
2. Fit testing
3. Training
Question:
The contract clearly states the agreement between the building owner and
the restoration
contractor. The form specifies who is responsible for payment and should be
signed ______
work begins.
Answer:
before
Question:
The technicians first responsibility when arriving at a water damage site is
to identify,
communicate, and eliminate ______ _______ if reasonably possible.
Answer:
,safety
hazards
Question:
Federal regulations apply to the handling of ____ based paint and asbestos.
Answer:
lead
Question:
After safety concerns have been addressed and the initial water source has
been stopped, the
restorer must complete an evaluation of the water's migration through the
structure. During
this process, the restorer inspects all ___________ ________ areas.
Answer:
potentially affected
Question:
The ultimate goal is to find the "edge" of water migration, which moves in a
three-dimensional
path throughout the structure. This is accomplished across carpeted
surfaces using a ________
______, and across most hard surfaces using a ___-________ (non-penetrating)
moisture meter.
Answer:
moisture sensor & non-invasive
, Question:
Water from a clean source with no substantial risk of causing sickness of
discomfort is said to be
________ _ water.
Answer:
Category 1
Question:
Water that has a significant degree of chemical, biological, and/or physical
contamination and a
potential to cause sickness or discomfort is ________ _.
Answer:
Category 2
Question:
Cleaning procedures must be employed before the drying of a Category 2
water loss can
continue. At a minimum, affected ______ ________ (or pad) must be removed
and disposed of,
and carpet must be throughly cleaned using hot water extraction method.
Answer:
carpet underlay
Question:
Questions and Answers Verified
Solutions Latest Update
(2026/2027)
Question:
__________ as soon as possible.
Answer:
respond quickly & mitigation
Question:
All restorers should follow the standard of care for the water restoration
profession developed
by the restoration industry entitled the IICRC ____.
Answer:
S500
Question:
To help protect technicians from the many hazards associated with
contaminated water losses,
restorers need to have ready access to several items. These items protect for
all _________
_________ to the body.
,Answer:
potential exposures
Question:
Respiratory protection regulations state that the employer must provide:
Answer:
1.
Medical evaluations
2. Fit testing
3. Training
Question:
The contract clearly states the agreement between the building owner and
the restoration
contractor. The form specifies who is responsible for payment and should be
signed ______
work begins.
Answer:
before
Question:
The technicians first responsibility when arriving at a water damage site is
to identify,
communicate, and eliminate ______ _______ if reasonably possible.
Answer:
,safety
hazards
Question:
Federal regulations apply to the handling of ____ based paint and asbestos.
Answer:
lead
Question:
After safety concerns have been addressed and the initial water source has
been stopped, the
restorer must complete an evaluation of the water's migration through the
structure. During
this process, the restorer inspects all ___________ ________ areas.
Answer:
potentially affected
Question:
The ultimate goal is to find the "edge" of water migration, which moves in a
three-dimensional
path throughout the structure. This is accomplished across carpeted
surfaces using a ________
______, and across most hard surfaces using a ___-________ (non-penetrating)
moisture meter.
Answer:
moisture sensor & non-invasive
, Question:
Water from a clean source with no substantial risk of causing sickness of
discomfort is said to be
________ _ water.
Answer:
Category 1
Question:
Water that has a significant degree of chemical, biological, and/or physical
contamination and a
potential to cause sickness or discomfort is ________ _.
Answer:
Category 2
Question:
Cleaning procedures must be employed before the drying of a Category 2
water loss can
continue. At a minimum, affected ______ ________ (or pad) must be removed
and disposed of,
and carpet must be throughly cleaned using hot water extraction method.
Answer:
carpet underlay
Question:
