Georgia Fire Protection Contractor
Examination Practice Questions And
Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of an automatic fire sprinkler
system is to:
A. Extinguish every fire completely
B. Control or suppress a fire until firefighters arrive
C. Sound evacuation alarms only
D. Remove smoke from a building
Answer: B
Rationale: Most sprinkler systems are designed to control or
suppress fires, limiting growth until the fire department
completes extinguishment.
2. Which NFPA standard governs the installation of
automatic sprinkler systems?
A. NFPA 13D
B. NFPA 20
C. NFPA 13
D. NFPA 72
,Answer: C
Rationale: NFPA 13 establishes requirements for the design
and installation of automatic fire sprinkler systems.
3. Which occupancy hazard classification generally requires
the lowest sprinkler density?
A. Extra Hazard Group 2
B. Ordinary Hazard Group 2
C. Ordinary Hazard Group 1
D. Light Hazard
Answer: D
Rationale: Light Hazard occupancies have relatively low
combustible loads and fire intensity.
4. Wet pipe sprinkler systems are:
A. Filled with compressed air
B. Filled with nitrogen
C. Filled with water under pressure
D. Filled with foam concentrate
Answer: C
Rationale: Wet pipe systems maintain water within the piping
at all times.
5. Dry pipe sprinkler systems are primarily used where:
,A. Water quality is poor
B. Buildings exceed three stories
C. Piping may freeze
D. Occupancy is residential
Answer: C
Rationale: Dry pipe systems prevent freezing by keeping
water out of exposed piping until activation.
6. The component that detects heat and releases water
from an individual sprinkler is the:
A. Check valve
B. Alarm valve
C. Pressure switch
D. Heat-sensitive element
Answer: D
Rationale: A fusible link or glass bulb activates each sprinkler
individually.
7. A fire pump is typically required when:
A. Water pressure exceeds design pressure
B. Available water supply is insufficient
C. The building is under 5,000 square feet
D. The occupancy is residential
Answer: B
, Rationale: Fire pumps boost pressure when municipal supply
cannot meet hydraulic demand.
8. Which NFPA standard governs fire pumps?
A. NFPA 72
B. NFPA 20
C. NFPA 24
D. NFPA 25
Answer: B
Rationale: NFPA 20 covers installation requirements for
stationary fire pumps.
9. A standpipe system primarily provides:
A. Automatic fire suppression
B. Smoke removal
C. Water supply for firefighters
D. Emergency lighting
Answer: C
Rationale: Standpipes allow firefighters to connect hoses
within buildings.
10. Which NFPA standard governs standpipe systems?
A. NFPA 72
B. NFPA 14
Examination Practice Questions And
Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of an automatic fire sprinkler
system is to:
A. Extinguish every fire completely
B. Control or suppress a fire until firefighters arrive
C. Sound evacuation alarms only
D. Remove smoke from a building
Answer: B
Rationale: Most sprinkler systems are designed to control or
suppress fires, limiting growth until the fire department
completes extinguishment.
2. Which NFPA standard governs the installation of
automatic sprinkler systems?
A. NFPA 13D
B. NFPA 20
C. NFPA 13
D. NFPA 72
,Answer: C
Rationale: NFPA 13 establishes requirements for the design
and installation of automatic fire sprinkler systems.
3. Which occupancy hazard classification generally requires
the lowest sprinkler density?
A. Extra Hazard Group 2
B. Ordinary Hazard Group 2
C. Ordinary Hazard Group 1
D. Light Hazard
Answer: D
Rationale: Light Hazard occupancies have relatively low
combustible loads and fire intensity.
4. Wet pipe sprinkler systems are:
A. Filled with compressed air
B. Filled with nitrogen
C. Filled with water under pressure
D. Filled with foam concentrate
Answer: C
Rationale: Wet pipe systems maintain water within the piping
at all times.
5. Dry pipe sprinkler systems are primarily used where:
,A. Water quality is poor
B. Buildings exceed three stories
C. Piping may freeze
D. Occupancy is residential
Answer: C
Rationale: Dry pipe systems prevent freezing by keeping
water out of exposed piping until activation.
6. The component that detects heat and releases water
from an individual sprinkler is the:
A. Check valve
B. Alarm valve
C. Pressure switch
D. Heat-sensitive element
Answer: D
Rationale: A fusible link or glass bulb activates each sprinkler
individually.
7. A fire pump is typically required when:
A. Water pressure exceeds design pressure
B. Available water supply is insufficient
C. The building is under 5,000 square feet
D. The occupancy is residential
Answer: B
, Rationale: Fire pumps boost pressure when municipal supply
cannot meet hydraulic demand.
8. Which NFPA standard governs fire pumps?
A. NFPA 72
B. NFPA 20
C. NFPA 24
D. NFPA 25
Answer: B
Rationale: NFPA 20 covers installation requirements for
stationary fire pumps.
9. A standpipe system primarily provides:
A. Automatic fire suppression
B. Smoke removal
C. Water supply for firefighters
D. Emergency lighting
Answer: C
Rationale: Standpipes allow firefighters to connect hoses
within buildings.
10. Which NFPA standard governs standpipe systems?
A. NFPA 72
B. NFPA 14
