VA HIC Exam Prep Questions and Answers
1. Enter and proceed" is
presented as a on the raised touchable
surface on a function key."
a. Triangle
b. Double Line
c. Circle
d. Dotted Line: c. Circle
2. In
new buildings, thresholds at doorways should be no higher than .
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4": a. 1/2"
3. The
maximum knee clearance shall be permitted to extend under
an element that is 9" above the floor.
a. 30"
,b. 18"
c. 36"
d. 25": d. 25"
4. In existing buildings and facilities, the turning space shall
be a circular space with a minimum diameter.
a. 60-inch
b. 50-inch
c. 70-inch
d. 55-inch: a. 60-inch
5. The brightness of the elevator car
landing sill, threshold platform and con-trols are to be no less
than foot candles.
a. 15
b. 10
c. 54
d. 5: d. 5
6. The clear width of an exterior accessible route located
within seating areas shall be minimum.
,a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches: c. 36 inches
7. In a Type A unit, if measuring to the highest part of the rim or
highest part of the counter, what is the maximum height of the
sink front above the floor?
a. 28"
b. 34"
c. 36"
d. 32": b. 34"
8. What is the least diameter of grab bars with circular cross sections?
a. 1"
b. 2"
c. 1-1/4"
d. 1-1/2": c. 1-1/4"
9. A
ll hardware such as handles, locks, or any other operable parts shall
be
, minimum above the floor.
a. 30"
b. 34"
c. 36"
d. 20": b. 34"
10. What is the minimum diameter of a circular
turnaround area in a new building.
a. 67"
b. 47"
c. 20"
d. 50": a. 67"
11. What components shall not be part of an accessible route
a. Elevators & Platform Lifts
b. Blended Transitions
c. Revolving doors & Turnstiles
d. Gates & Curb Ramps: c. Revolving doors & Turnstiles
12. The maximum height of existing elevator call
1. Enter and proceed" is
presented as a on the raised touchable
surface on a function key."
a. Triangle
b. Double Line
c. Circle
d. Dotted Line: c. Circle
2. In
new buildings, thresholds at doorways should be no higher than .
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4": a. 1/2"
3. The
maximum knee clearance shall be permitted to extend under
an element that is 9" above the floor.
a. 30"
,b. 18"
c. 36"
d. 25": d. 25"
4. In existing buildings and facilities, the turning space shall
be a circular space with a minimum diameter.
a. 60-inch
b. 50-inch
c. 70-inch
d. 55-inch: a. 60-inch
5. The brightness of the elevator car
landing sill, threshold platform and con-trols are to be no less
than foot candles.
a. 15
b. 10
c. 54
d. 5: d. 5
6. The clear width of an exterior accessible route located
within seating areas shall be minimum.
,a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches: c. 36 inches
7. In a Type A unit, if measuring to the highest part of the rim or
highest part of the counter, what is the maximum height of the
sink front above the floor?
a. 28"
b. 34"
c. 36"
d. 32": b. 34"
8. What is the least diameter of grab bars with circular cross sections?
a. 1"
b. 2"
c. 1-1/4"
d. 1-1/2": c. 1-1/4"
9. A
ll hardware such as handles, locks, or any other operable parts shall
be
, minimum above the floor.
a. 30"
b. 34"
c. 36"
d. 20": b. 34"
10. What is the minimum diameter of a circular
turnaround area in a new building.
a. 67"
b. 47"
c. 20"
d. 50": a. 67"
11. What components shall not be part of an accessible route
a. Elevators & Platform Lifts
b. Blended Transitions
c. Revolving doors & Turnstiles
d. Gates & Curb Ramps: c. Revolving doors & Turnstiles
12. The maximum height of existing elevator call
