FULL NHIE EXAM Comprehensive Resource To Help You Ace 2026-2027 Exams Includes
Frequently Tested Questions With ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Where you have found evidence of footing settlement,
how can you predict whether there will be further settle-
ment?
(a) You can count the number of planes of movement. You cannot predict settlement from a single inspection
(b) You can determine the type of foundation material.
(c) You cannot predict settlement from a single inspec-
tion.
(d) You can determine the depth of the footing.
2. You typically identify a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the form
of a cold mist. As an oil stain
(c) By the strong odor.
(d) By looking for evidence of ice along the refrigerant
lines
3. Typical wood frame wall assemblies include all of the
following components EXCEPT.
(a) Studs Bridging
(b) Bridging
(c) Sheathing
(d) Siding
4. All of the following are common approaches to improv-
ing chimney draft EXCEPT
(a) Adding a draft inducer fan. Resloping the cap
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap.
, FULL NHIE EXAM Comprehensive Resource To Help You Ace 2026-2027 Exams Includes
Frequently Tested Questions With ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
5. All of the following statements are true of shrinkage
cracks EXCEPT that
(a) Shrinkage cracks do not typically go into the footings.
(b) Shrinkage cracks do not necessarily have correspond-
ing cracks Vertical shear is associated with shrinkage cracks
elsewhere in the building.
(c) Vertical shear is associated with shrinkage cracks.
(d) Shrinkage cracks are common with poured concrete
foundation
walls.
6. Which of the following is NOT typically a component of
a private water supply system?
(a) Foot valve Pressure regulator
(b) Pump
(c) Pressure regulator
(d) Pressure tank
7. Split-system, air-cooled, central air-conditioning sys-
tems have how many fans?
(a) None Two
(b) One
(c) Two
(d) Four
8. Insulated metal exterior doors with storm doors should
be avoided because they may
Overheat
(a) Increase heat loss.
(b) Increase air leakage.
, (c) Overheat.
(d) Have poor architectural appeal.
9. You plug your circuit tester into an outlet that has a
washing machine plugged into it. Your tester shows that
the outlet is properly wired and grounded. How could you
improve this inspection process?
Unplug the washing machine
(a) Use a voltage tester
(b) Use a circuit tester with a GFI test button
(c) Unplug the washing machine
(d) Turn the washing machine on before doing your test.
10. Given a foundation wall that is cracked due to horizon-
tal force
(a) You will not be able to determine whether the wall has
also moved
inward. If the wall has moved inward, the cracks would typically be
(b) If the wall has moved inward, the cracks would typically wider on the inside face
be wider on the inside face.
(c) If the wall has moved inward, cracks will typically be
wider on the outside face.
(d) You should not be concerned unless the crack is at
least ¼ in width.
11. On most steep roofs, exposed fasteners are
(a) Used for anchorage against wind.
A sign of poor installation
(b) A sign of poor installation.
(c) A sign of good installation.
(d) Used to prevent ice dams.
, 12. All of the following are slab-on-grade-construction
techniques EXCEPT
(a) Monolithic slab. Inverted slab
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab.
13. Masonry chimneys should have a clearance from com-
bustible framing members of
(a) 1 inch. 2 inches
(b) 2 inches.
(c) 4 inches.
(d) 12 inches.
14. Efflorescence
(a) Is associated with water moving through masonry
walls. Is associated with water moving through masonry walls
(b) Can only appear on the cold side of a wall.
(c) Only occurs in freezing climates.
(d) Is an organic growth.
15. On a conventional split-system air-conditioning sys-
tem, the high-pressure side is the portion of the refriger-
ant line from the
Compressor to the expansion device.
(a) Compressor to the expansion device.
(b) Metering device to the evaporator coil.
(c) Expansion device to the compressor.
(d) Evaporator to the compressor.
Frequently Tested Questions With ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. Where you have found evidence of footing settlement,
how can you predict whether there will be further settle-
ment?
(a) You can count the number of planes of movement. You cannot predict settlement from a single inspection
(b) You can determine the type of foundation material.
(c) You cannot predict settlement from a single inspec-
tion.
(d) You can determine the depth of the footing.
2. You typically identify a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the form
of a cold mist. As an oil stain
(c) By the strong odor.
(d) By looking for evidence of ice along the refrigerant
lines
3. Typical wood frame wall assemblies include all of the
following components EXCEPT.
(a) Studs Bridging
(b) Bridging
(c) Sheathing
(d) Siding
4. All of the following are common approaches to improv-
ing chimney draft EXCEPT
(a) Adding a draft inducer fan. Resloping the cap
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap.
, FULL NHIE EXAM Comprehensive Resource To Help You Ace 2026-2027 Exams Includes
Frequently Tested Questions With ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
5. All of the following statements are true of shrinkage
cracks EXCEPT that
(a) Shrinkage cracks do not typically go into the footings.
(b) Shrinkage cracks do not necessarily have correspond-
ing cracks Vertical shear is associated with shrinkage cracks
elsewhere in the building.
(c) Vertical shear is associated with shrinkage cracks.
(d) Shrinkage cracks are common with poured concrete
foundation
walls.
6. Which of the following is NOT typically a component of
a private water supply system?
(a) Foot valve Pressure regulator
(b) Pump
(c) Pressure regulator
(d) Pressure tank
7. Split-system, air-cooled, central air-conditioning sys-
tems have how many fans?
(a) None Two
(b) One
(c) Two
(d) Four
8. Insulated metal exterior doors with storm doors should
be avoided because they may
Overheat
(a) Increase heat loss.
(b) Increase air leakage.
, (c) Overheat.
(d) Have poor architectural appeal.
9. You plug your circuit tester into an outlet that has a
washing machine plugged into it. Your tester shows that
the outlet is properly wired and grounded. How could you
improve this inspection process?
Unplug the washing machine
(a) Use a voltage tester
(b) Use a circuit tester with a GFI test button
(c) Unplug the washing machine
(d) Turn the washing machine on before doing your test.
10. Given a foundation wall that is cracked due to horizon-
tal force
(a) You will not be able to determine whether the wall has
also moved
inward. If the wall has moved inward, the cracks would typically be
(b) If the wall has moved inward, the cracks would typically wider on the inside face
be wider on the inside face.
(c) If the wall has moved inward, cracks will typically be
wider on the outside face.
(d) You should not be concerned unless the crack is at
least ¼ in width.
11. On most steep roofs, exposed fasteners are
(a) Used for anchorage against wind.
A sign of poor installation
(b) A sign of poor installation.
(c) A sign of good installation.
(d) Used to prevent ice dams.
, 12. All of the following are slab-on-grade-construction
techniques EXCEPT
(a) Monolithic slab. Inverted slab
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab.
13. Masonry chimneys should have a clearance from com-
bustible framing members of
(a) 1 inch. 2 inches
(b) 2 inches.
(c) 4 inches.
(d) 12 inches.
14. Efflorescence
(a) Is associated with water moving through masonry
walls. Is associated with water moving through masonry walls
(b) Can only appear on the cold side of a wall.
(c) Only occurs in freezing climates.
(d) Is an organic growth.
15. On a conventional split-system air-conditioning sys-
tem, the high-pressure side is the portion of the refriger-
ant line from the
Compressor to the expansion device.
(a) Compressor to the expansion device.
(b) Metering device to the evaporator coil.
(c) Expansion device to the compressor.
(d) Evaporator to the compressor.
