Dell Certification Test 2026 || Most Recent Exam 2026-
2027 Actual Complete Real Exam Questions And
Correct Answers (Verified Answers by Expert)
Already Graded A+ | Guaranteed Success!!
Newest Exam | Just Released!!
If the system is not booting into the operating system, how can
you check if the
hard drive is
detected?
- The HDD indicator light or LED
- From within the Windows (or other) operating system
- Go to BIOS
- Open the Chassis and Check - ANSWER-Right answer:
- Go to BIOS
Which is the easiest way to verify the functionality of system
board?
- By removing the memory module
- By reinstalling the OS
,- By swapping the system board
- Check the PSU Built in Self-test test button - ANSWER-Correct
Answer:
By removing the memory module
Which key is used to access the one time boot menu while
restarting the
computer?
- F2
- F12
- F4
- F5 - ANSWER-Correct Answer:
- F12
How will you initiate ePSA in a Dell System?
- Press F12 to enter one time boot menu and then select
diagnostics
- By pressing on F2
,- By pressing power and D button
- Boot to an external USB key that has ePSA - ANSWER-Correct
Answer:
- Press F12 to enter one time boot menu and then select
diagnostics
Choose all that Apply:
When encountered with a no POST situation, what must
technicians do prior to
replacing the suspected
failed part?
- Capture the fault exhibited by running Diagnostics indication,
check for Error
Codes and check BIOS
settings
- Reseat parts and cables
- Replace the suspected failed part immediately
- Re-run diagnostic sequences with removal of individual parts
to isolate issue -
, ANSWER-Correct
Answer:
- Capture the fault exhibited by running Diagnostics indication,
check for Error
Codes and check BIOS
settings
- Reseat parts and cables
- Re-run diagnostic sequences with removal of individual parts
to isolate issue
When do you select the BT Disabled setting in Service Menu of
Manufacturing
Mode
(SMMM)?
- It should never be checked
- If BT Disabled label is present inside the bottom door or
Chassis
- If BT card is not ordered with the system
- It should always be checked irrespective of other settings -
ANSWER-Correct
Answer:
2027 Actual Complete Real Exam Questions And
Correct Answers (Verified Answers by Expert)
Already Graded A+ | Guaranteed Success!!
Newest Exam | Just Released!!
If the system is not booting into the operating system, how can
you check if the
hard drive is
detected?
- The HDD indicator light or LED
- From within the Windows (or other) operating system
- Go to BIOS
- Open the Chassis and Check - ANSWER-Right answer:
- Go to BIOS
Which is the easiest way to verify the functionality of system
board?
- By removing the memory module
- By reinstalling the OS
,- By swapping the system board
- Check the PSU Built in Self-test test button - ANSWER-Correct
Answer:
By removing the memory module
Which key is used to access the one time boot menu while
restarting the
computer?
- F2
- F12
- F4
- F5 - ANSWER-Correct Answer:
- F12
How will you initiate ePSA in a Dell System?
- Press F12 to enter one time boot menu and then select
diagnostics
- By pressing on F2
,- By pressing power and D button
- Boot to an external USB key that has ePSA - ANSWER-Correct
Answer:
- Press F12 to enter one time boot menu and then select
diagnostics
Choose all that Apply:
When encountered with a no POST situation, what must
technicians do prior to
replacing the suspected
failed part?
- Capture the fault exhibited by running Diagnostics indication,
check for Error
Codes and check BIOS
settings
- Reseat parts and cables
- Replace the suspected failed part immediately
- Re-run diagnostic sequences with removal of individual parts
to isolate issue -
, ANSWER-Correct
Answer:
- Capture the fault exhibited by running Diagnostics indication,
check for Error
Codes and check BIOS
settings
- Reseat parts and cables
- Re-run diagnostic sequences with removal of individual parts
to isolate issue
When do you select the BT Disabled setting in Service Menu of
Manufacturing
Mode
(SMMM)?
- It should never be checked
- If BT Disabled label is present inside the bottom door or
Chassis
- If BT card is not ordered with the system
- It should always be checked irrespective of other settings -
ANSWER-Correct
Answer:
