CCNA 2 Switching,
Routing & Wireless
Essentials v7.0 SRWE
Final Exam 2026 |
Questions, Answers &
Rationales Study Guide
|Graded A+ | Guaranteed
success|
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales
Included
,3. Refer to the exhibit. R1 was configured with the static Change the destination network and mask to 0.0.0.0 0.0.0.0
route command ip route 209.165.200.224 255.255.255.224
S0/0/0 and consequently users on network 172.16.0.0/16
are unable to reach resources on the Internet. How
should this static route be changed to allow user traffic
from the LAN to reach the Internet?
Add an administrative distance of 254.
Change the destination network and mask to 0.0.0.0
0.0.0.0
Change the exit interface to S0/0/1.
Add the next-hop neighbor address of 209.165.200.226.
4. Which option shows a correctly configured IPv4 ip route 0.0.0.0 0.0.0.0 S0/0/0
default static route?
ip route 0.0.0.0 255.255.255.0 S0/0/0
ip route 0.0.0.0 0.0.0.0 S0/0/0
ip route 0.0.0.0 255.255.255.255 S0/0/0
ip route 0.0.0.0 255.0.0.0 S0/0/0
5. Refer to the exhibit. Which static route command can ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2
be entered on R1 to forward traffic to the LAN connected
to R2?
ipv6 route 2001:db8:12:10::/64 S0/0/0
ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2
ipv6 route 2001:db8:12:10::/64 S0/0/0 fe80::2
ipv6 route 2001:db8:12:10::/64 S0/0/1 2001:db8:12:10::1
6. What is a method to launch a VLAN hopping attack? introducing a rogue switch and enabling trunking
introducing a rogue switch and enabling trunking
sending spoofed native VLAN information
sending spoofed IP addresses from the attacking host
flooding the switch with MAC addresses
, 7. A cybersecurity analyst is using the macof tool to MAC address table overflow
evaluate configurations of switches deployed in the
backbone network of an organization. Which type of LAN
attack is the analyst targeting during this evaluation?
VLAN hopping
DHCP spoofing
MAC address table overflow
VLAN double-tagging
8. Refer to the exhibit. A network administrator is The state is not maintained by the DHCPv6 server under stateless DHCPv6
configuring a router as a DHCPv6 server. The operation.
administrator issues a show ipv6 dhcp pool command to
verify the configuration. Which statement explains the
reason that the number of active clients is 0?
The default gateway address is not provided in the pool.
No clients have communicated with the DHCPv6 server
yet.
The IPv6 DHCP pool configuration has no IPv6 address
range specified.
The state is not maintained by the DHCPv6 server under
stateless DHCPv6 operation.
9. Refer to the exhibit. A network administrator configured the virtual IP address and the virtual MAC address for the HSRP group 1
routers R1 and R2 as part of HSRP group 1. After the
routers have been reloaded, a user on Host1 complained
of lack of connectivity to the Internet The network
administrator issued the show standby brief command on
both routers to verify the HSRP operations. In addition,
the administrator observed the ARP table on Host1. Which
entry should be seen in the ARP table on Host1 in order
to gain connectivity to the Internet?
the virtual IP address and the virtual MAC address for the
HSRP group 1
the virtual IP address of the HSRP group 1 and the MAC
address of R1
the virtual IP address of the HSRP group 1 and the MAC
address of R2
the IP address and the MAC address of R1
Routing & Wireless
Essentials v7.0 SRWE
Final Exam 2026 |
Questions, Answers &
Rationales Study Guide
|Graded A+ | Guaranteed
success|
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales
Included
,3. Refer to the exhibit. R1 was configured with the static Change the destination network and mask to 0.0.0.0 0.0.0.0
route command ip route 209.165.200.224 255.255.255.224
S0/0/0 and consequently users on network 172.16.0.0/16
are unable to reach resources on the Internet. How
should this static route be changed to allow user traffic
from the LAN to reach the Internet?
Add an administrative distance of 254.
Change the destination network and mask to 0.0.0.0
0.0.0.0
Change the exit interface to S0/0/1.
Add the next-hop neighbor address of 209.165.200.226.
4. Which option shows a correctly configured IPv4 ip route 0.0.0.0 0.0.0.0 S0/0/0
default static route?
ip route 0.0.0.0 255.255.255.0 S0/0/0
ip route 0.0.0.0 0.0.0.0 S0/0/0
ip route 0.0.0.0 255.255.255.255 S0/0/0
ip route 0.0.0.0 255.0.0.0 S0/0/0
5. Refer to the exhibit. Which static route command can ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2
be entered on R1 to forward traffic to the LAN connected
to R2?
ipv6 route 2001:db8:12:10::/64 S0/0/0
ipv6 route 2001:db8:12:10::/64 S0/0/1 fe80::2
ipv6 route 2001:db8:12:10::/64 S0/0/0 fe80::2
ipv6 route 2001:db8:12:10::/64 S0/0/1 2001:db8:12:10::1
6. What is a method to launch a VLAN hopping attack? introducing a rogue switch and enabling trunking
introducing a rogue switch and enabling trunking
sending spoofed native VLAN information
sending spoofed IP addresses from the attacking host
flooding the switch with MAC addresses
, 7. A cybersecurity analyst is using the macof tool to MAC address table overflow
evaluate configurations of switches deployed in the
backbone network of an organization. Which type of LAN
attack is the analyst targeting during this evaluation?
VLAN hopping
DHCP spoofing
MAC address table overflow
VLAN double-tagging
8. Refer to the exhibit. A network administrator is The state is not maintained by the DHCPv6 server under stateless DHCPv6
configuring a router as a DHCPv6 server. The operation.
administrator issues a show ipv6 dhcp pool command to
verify the configuration. Which statement explains the
reason that the number of active clients is 0?
The default gateway address is not provided in the pool.
No clients have communicated with the DHCPv6 server
yet.
The IPv6 DHCP pool configuration has no IPv6 address
range specified.
The state is not maintained by the DHCPv6 server under
stateless DHCPv6 operation.
9. Refer to the exhibit. A network administrator configured the virtual IP address and the virtual MAC address for the HSRP group 1
routers R1 and R2 as part of HSRP group 1. After the
routers have been reloaded, a user on Host1 complained
of lack of connectivity to the Internet The network
administrator issued the show standby brief command on
both routers to verify the HSRP operations. In addition,
the administrator observed the ARP table on Host1. Which
entry should be seen in the ARP table on Host1 in order
to gain connectivity to the Internet?
the virtual IP address and the virtual MAC address for the
HSRP group 1
the virtual IP address of the HSRP group 1 and the MAC
address of R1
the virtual IP address of the HSRP group 1 and the MAC
address of R2
the IP address and the MAC address of R1
