Georgia Fundamentals of Engineering
Examination Practice Exam Questions
And Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A Instant
Download Pdf
1. A force of 50 N acts on an object and causes it to move 4 m in the direction
of the force. What is the work done?
A. 100 J
B. 200 J
C. 250 J
D. 400 J
Rationale: Work equals force multiplied by distance. W = 50 × 4 = 200 joules.
2. What is the SI unit of power?
A. Joule
B. Newton
C. Watt
D. Pascal
Rationale: Power is the rate of doing work and is measured in watts.
3. The derivative of x² is:
,A. x
B. 2x
C. x²
D. 2
Rationale: Using the power rule, d/dx(x²) = 2x.
4. Which law states that the current through a conductor is proportional to
voltage?
A. Kirchhoff's Law
B. Faraday's Law
C. Coulomb's Law
D. Ohm's Law
Rationale: Ohm's Law states V = IR.
5. What is the area of a circle with radius 5 m?
A. 25π m²
B. 78.54 m²
C. 31.42 m²
D. 50π m²
Rationale: Area = πr² = π(5²) ≈ 78.54 m².
6. Which material is generally considered ductile?
A. Glass
B. Concrete
C. Steel
D. Brick
Rationale: Steel can undergo significant plastic deformation before failure.
7. The pH of a neutral solution at 25°C is:
A. 0
B. 1
, C. 7
D. 14
Rationale: Pure water has a pH of 7 at 25°C.
8. A simply supported beam carries a central point load. Maximum bending
moment occurs at:
A. Support
B. Quarter point
C. Center of beam
D. Anywhere along beam
Rationale: For a centered point load, the maximum moment occurs at midspan.
9. What is the density of a material with mass 20 kg and volume 4 m³?
A. 2 kg/m³
B. 4 kg/m³
C. 5 kg/m³
D. 10 kg/m³
Rationale: Density = mass ÷ volume = 20 ÷ 4 = 5 kg/m³.
10.Which process converts liquid to vapor?
A. Condensation
B. Freezing
C. Sublimation
D. Evaporation
Rationale: Evaporation is the phase change from liquid to vapor.
11.The integral of 2x dx is:
A. x²/2 + C
B. 2x + C
C. x² + C
D. x³ + C
Examination Practice Exam Questions
And Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A Instant
Download Pdf
1. A force of 50 N acts on an object and causes it to move 4 m in the direction
of the force. What is the work done?
A. 100 J
B. 200 J
C. 250 J
D. 400 J
Rationale: Work equals force multiplied by distance. W = 50 × 4 = 200 joules.
2. What is the SI unit of power?
A. Joule
B. Newton
C. Watt
D. Pascal
Rationale: Power is the rate of doing work and is measured in watts.
3. The derivative of x² is:
,A. x
B. 2x
C. x²
D. 2
Rationale: Using the power rule, d/dx(x²) = 2x.
4. Which law states that the current through a conductor is proportional to
voltage?
A. Kirchhoff's Law
B. Faraday's Law
C. Coulomb's Law
D. Ohm's Law
Rationale: Ohm's Law states V = IR.
5. What is the area of a circle with radius 5 m?
A. 25π m²
B. 78.54 m²
C. 31.42 m²
D. 50π m²
Rationale: Area = πr² = π(5²) ≈ 78.54 m².
6. Which material is generally considered ductile?
A. Glass
B. Concrete
C. Steel
D. Brick
Rationale: Steel can undergo significant plastic deformation before failure.
7. The pH of a neutral solution at 25°C is:
A. 0
B. 1
, C. 7
D. 14
Rationale: Pure water has a pH of 7 at 25°C.
8. A simply supported beam carries a central point load. Maximum bending
moment occurs at:
A. Support
B. Quarter point
C. Center of beam
D. Anywhere along beam
Rationale: For a centered point load, the maximum moment occurs at midspan.
9. What is the density of a material with mass 20 kg and volume 4 m³?
A. 2 kg/m³
B. 4 kg/m³
C. 5 kg/m³
D. 10 kg/m³
Rationale: Density = mass ÷ volume = 20 ÷ 4 = 5 kg/m³.
10.Which process converts liquid to vapor?
A. Condensation
B. Freezing
C. Sublimation
D. Evaporation
Rationale: Evaporation is the phase change from liquid to vapor.
11.The integral of 2x dx is:
A. x²/2 + C
B. 2x + C
C. x² + C
D. x³ + C
