NYC SITE SAFETY MANAGER EXAM PRACTICE TEST QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A | INSTANT DOWNLOAD PDF
Core Domains
Local Law 196 and NYC Construction Safety Regulations
OSHA Construction Safety Standards (29 CFR 1926)
Chapter 33 of NYC Building Code (Demolition and Construction)
Scaffolding Safety and Requirements
Excavation and Trenching Safety
Cranes, Derricks, and Hoisting Equipment
Hazardous Materials Recognition and Handling
Fire Prevention and Protection on Construction Sites
Personal Protective Equipment (PPE) Requirements
Site Safety Plan Development and Implementation
The NYC Site Safety Manager Exam assesses candidates' competency in overseeing construction site safety
compliance within New York City. This examination evaluates knowledge of Local Law 196, OSHA
regulations, Chapter 33 requirements, and practical safety management skills essential for protecting
workers and the public. The test consists of multiple-choice and scenario-based questions that emphasize real-
world application, critical decision-making, and regulatory compliance. Candidates must demonstrate
proficiency in identifying hazards, implementing safety controls, managing site safety plans, and ensuring
adherence to all applicable laws and standards. Successful performance indicates readiness to serve as a
qualified Site Safety Manager responsible for maintaining safe construction environments.
SECTION ONE: QUESTIONS 1–100
,Question 1
Under Local Law 196 of 2017, what is the minimum number of safety training hours required for supervisors
working on NYC construction sites with major permits?
A. 30 hours
B. 40 hours
C. 52 hours
D. 62 hours
🟢 Correct answer: D
🔴 RATIONALE: Local Law 196 of 2017 mandates that supervisors complete 62 hours of safety training,
including the Site Safety Manager course, to work on construction sites with major permits in NYC. This
requirement was implemented to enhance construction safety standards.
Question 2
According to OSHA 29 CFR 1926.501, what is the minimum height at which fall protection must be provided for
construction workers?
A. 4 feet
B. 6 feet
C. 8 feet
D. 10 feet
🟢 Correct answer: B
,🔴 RATIONALE: OSHA regulation 29 CFR 1926.501(b)(1) requires fall protection systems for employees
working at heights of 6 feet or more above a lower level on construction sites. This is the federal standard that
NYC follows.
Question 3
When inspecting a scaffold, what is the maximum allowable slope for a scaffold base on firm ground?
A. 1:40
B. 1:50
C. 1:60
D. 1:100
🟢 Correct answer: A
🔴 RATIONALE: OSHA 29 CFR 1926.451(c)(1) requires scaffold bases to be level and firm, with a maximum
slope of 1:40 (approximately 2.5 degrees) to ensure stability and prevent tipping.
Question 4
In NYC construction, what color tag indicates a scaffold has been inspected and is safe for use?
A. Red tag
B. Yellow tag
C. Green tag
D. Blue tag
🟢 Correct answer: C
, 🔴 RATIONALE: Green tags are used to indicate that a scaffold has been inspected by a qualified person and is
safe for workers to use. Red tags indicate unsafe conditions, and yellow tags indicate caution or partial use.
Question 5
What is the required minimum distance from the edge of an excavation for storing materials and equipment,
according to OSHA?
A. 1 foot
B. 2 feet
C. 3 feet
D. 4 feet
🟢 Correct answer: B
🔴 RATIONALE: OSHA 29 CFR 1926.501(j)(1) requires materials and equipment to be kept at least 2 feet from
the edge of excavations to prevent them from falling into the excavation and striking workers.
Question 6
Which hazardous material is most commonly associated with asbestos testing requirements in NYC demolition
projects?
A. Lead paint
B. Fiberglass insulation
C. Asbestos-containing materials
D. Silicon dioxide
(VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A | INSTANT DOWNLOAD PDF
Core Domains
Local Law 196 and NYC Construction Safety Regulations
OSHA Construction Safety Standards (29 CFR 1926)
Chapter 33 of NYC Building Code (Demolition and Construction)
Scaffolding Safety and Requirements
Excavation and Trenching Safety
Cranes, Derricks, and Hoisting Equipment
Hazardous Materials Recognition and Handling
Fire Prevention and Protection on Construction Sites
Personal Protective Equipment (PPE) Requirements
Site Safety Plan Development and Implementation
The NYC Site Safety Manager Exam assesses candidates' competency in overseeing construction site safety
compliance within New York City. This examination evaluates knowledge of Local Law 196, OSHA
regulations, Chapter 33 requirements, and practical safety management skills essential for protecting
workers and the public. The test consists of multiple-choice and scenario-based questions that emphasize real-
world application, critical decision-making, and regulatory compliance. Candidates must demonstrate
proficiency in identifying hazards, implementing safety controls, managing site safety plans, and ensuring
adherence to all applicable laws and standards. Successful performance indicates readiness to serve as a
qualified Site Safety Manager responsible for maintaining safe construction environments.
SECTION ONE: QUESTIONS 1–100
,Question 1
Under Local Law 196 of 2017, what is the minimum number of safety training hours required for supervisors
working on NYC construction sites with major permits?
A. 30 hours
B. 40 hours
C. 52 hours
D. 62 hours
🟢 Correct answer: D
🔴 RATIONALE: Local Law 196 of 2017 mandates that supervisors complete 62 hours of safety training,
including the Site Safety Manager course, to work on construction sites with major permits in NYC. This
requirement was implemented to enhance construction safety standards.
Question 2
According to OSHA 29 CFR 1926.501, what is the minimum height at which fall protection must be provided for
construction workers?
A. 4 feet
B. 6 feet
C. 8 feet
D. 10 feet
🟢 Correct answer: B
,🔴 RATIONALE: OSHA regulation 29 CFR 1926.501(b)(1) requires fall protection systems for employees
working at heights of 6 feet or more above a lower level on construction sites. This is the federal standard that
NYC follows.
Question 3
When inspecting a scaffold, what is the maximum allowable slope for a scaffold base on firm ground?
A. 1:40
B. 1:50
C. 1:60
D. 1:100
🟢 Correct answer: A
🔴 RATIONALE: OSHA 29 CFR 1926.451(c)(1) requires scaffold bases to be level and firm, with a maximum
slope of 1:40 (approximately 2.5 degrees) to ensure stability and prevent tipping.
Question 4
In NYC construction, what color tag indicates a scaffold has been inspected and is safe for use?
A. Red tag
B. Yellow tag
C. Green tag
D. Blue tag
🟢 Correct answer: C
, 🔴 RATIONALE: Green tags are used to indicate that a scaffold has been inspected by a qualified person and is
safe for workers to use. Red tags indicate unsafe conditions, and yellow tags indicate caution or partial use.
Question 5
What is the required minimum distance from the edge of an excavation for storing materials and equipment,
according to OSHA?
A. 1 foot
B. 2 feet
C. 3 feet
D. 4 feet
🟢 Correct answer: B
🔴 RATIONALE: OSHA 29 CFR 1926.501(j)(1) requires materials and equipment to be kept at least 2 feet from
the edge of excavations to prevent them from falling into the excavation and striking workers.
Question 6
Which hazardous material is most commonly associated with asbestos testing requirements in NYC demolition
projects?
A. Lead paint
B. Fiberglass insulation
C. Asbestos-containing materials
D. Silicon dioxide
