Can you define and test a ground? - answer a ground is a point in the circuit that is
connected to the earth. You can use a multimeter-if the resistance is too high, it may
indicate that the ground connection is not providing adequate protection
Electrical safety rules - answer 1.always use a circuit tester or voltage detector to check
that a circuit is de-energized before working on it.
Electrical safety rule - answer do not operate electrical equipment that is damaged,
frayed, or otherwise in poor condition.
Electrical safety rule - answer never touch electrical wiring or equipment with wet hands
or while standing on a wet surface.
Electrical safety rule - answer use the correct fuse or circuit breaker for the circuit you
are working on.
Electrical safety rule - answer never remove or bypass the grounding prong on a plug.
Electrical safety - answer do not use extension cords or multiple outlet adapters that are
not rated for the equipment you are using.
Electrical safety - answer do not overload circuits by plugging in too many devices or
using high-powered equipment.
Electrical safety - answer do not use electrical equipment in wet or damp conditions
unless it is specifically designed for that purpose.
1
, Electrical safety - answer use properly rated and properly installed surge protectors for
sensitive electronic equipment.
Electrical safety - answer always follow the manufacturer's instructions for using
electrical equipment.
Purpose of lockout tag out - answer to prevent unexpected energization or startup of
machinery or equipment while it is being serviced or repaired.
State the two types of electrical current - answer ac and dc
How to use a circuit tester - answer to test a circuit, first locate the circuit breaker or fuse
that controls the circuit you want to test. Then, using the circuit tester, touch the red probe
to the live wire and the black probe to the neutral or ground wire.
What is a power source - answer the power source is the source of electrical energy for
the circuit. It can be a battery, a generator, or a power outlet. The power source provides the
electrical current that flows through the circuit.
What is a conductor - answer the conductor is a material that allows electricity to flow
through it, such as a wire. The conductor carries the electrical current from the power
source to the load.
What is a load - answer the load is the device or appliance that is being powered by the
circuit. It can be a light bulb, a motor, or any other device that uses electricity. The load
converts the electrical energy from the circuit into some other form of energy, such as light
or motion.
2
connected to the earth. You can use a multimeter-if the resistance is too high, it may
indicate that the ground connection is not providing adequate protection
Electrical safety rules - answer 1.always use a circuit tester or voltage detector to check
that a circuit is de-energized before working on it.
Electrical safety rule - answer do not operate electrical equipment that is damaged,
frayed, or otherwise in poor condition.
Electrical safety rule - answer never touch electrical wiring or equipment with wet hands
or while standing on a wet surface.
Electrical safety rule - answer use the correct fuse or circuit breaker for the circuit you
are working on.
Electrical safety rule - answer never remove or bypass the grounding prong on a plug.
Electrical safety - answer do not use extension cords or multiple outlet adapters that are
not rated for the equipment you are using.
Electrical safety - answer do not overload circuits by plugging in too many devices or
using high-powered equipment.
Electrical safety - answer do not use electrical equipment in wet or damp conditions
unless it is specifically designed for that purpose.
1
, Electrical safety - answer use properly rated and properly installed surge protectors for
sensitive electronic equipment.
Electrical safety - answer always follow the manufacturer's instructions for using
electrical equipment.
Purpose of lockout tag out - answer to prevent unexpected energization or startup of
machinery or equipment while it is being serviced or repaired.
State the two types of electrical current - answer ac and dc
How to use a circuit tester - answer to test a circuit, first locate the circuit breaker or fuse
that controls the circuit you want to test. Then, using the circuit tester, touch the red probe
to the live wire and the black probe to the neutral or ground wire.
What is a power source - answer the power source is the source of electrical energy for
the circuit. It can be a battery, a generator, or a power outlet. The power source provides the
electrical current that flows through the circuit.
What is a conductor - answer the conductor is a material that allows electricity to flow
through it, such as a wire. The conductor carries the electrical current from the power
source to the load.
What is a load - answer the load is the device or appliance that is being powered by the
circuit. It can be a light bulb, a motor, or any other device that uses electricity. The load
converts the electrical energy from the circuit into some other form of energy, such as light
or motion.
2
