NEBB CP EXAM STUDY GUIDE
Absolute Value - Answers - The numerical value without regard to its sign
Acceleration - Answers - The vector quantity that specifies the time rate of change of
velocity
Accuracy - Answers - The capability of an instrument to indicate the true value of a
measured quantity
Adjusting - Answers - The varying of system flows by partially closing balancing devices
such as dampers and valves, and varying fan speeds to achieve optimum system
operating conditions within design and installation limitations
AHJ - Answers - The local governing authority having jurisdiction over a designated
portion of the project
Air Change Rate - Answers - The number of times the total air volume of a defined
space is replaced in a given unit of time.
Air Exchange Rate - Answers - The rate at which outdoor air replaces indoor air within a
given space or room
AHU - Answers - Air Handling Unit
Balancing - Answers - The methodical proportioning of air and hydronic flows through
the system mains, branches, and terminal devices using acceptable procedures to
achieve the specified airflow or hydronic flow within installation, testing, and design
limitations
Calibrate - Answers - The act of comparing an instrument of unknown accuracy with a
standard of known accuracy to detect, correlate, report, or correct by by adjustment
unacceptable variation in the accuracy of the tested instrument.
Conformed Contract Documents - Answers - Current and complete documents
Corrective Action - Answers - Repairing, replacing, re-building, calibrating, or adjusting
of equipment or systems
Deficiency - Answers - Any installation, measurement, or finding outside the tolerances
allowed by NEBB Procedural Standard or Project specifications.
Differential Pressure - Answers - The difference between two pressures measured with
respect to the same reference pressure
, Diffuser - Answers - Outlet designed to mix supply air and room air, and to distribute it in
varying directions
Diversity - Answers - The term used to describe the difference in air or water volume
between the prime mover (fan or pump) and the terminal elements.
Direct Expansion refrigerant type system - Answers - DX
Embedded Motor - Answers - Any motor that is inaccessible without disassembling the
equipment it is mounted in
EOR - Answers - Engineer Of Record. The engineer responsible for project plans and
specifications
Environmental Systems - Answers - Systems using a combination of mechanical
equipment, airflow, water flow, and electrical energy to provide heating, ventilating, air
conditioning, humidification, and de-humidification for the purpose of human comfort or
process control of temperature and humidity
Equal Area Method - Answers - Term used to describe the more common method of
duct traversing by averaging velocity readings taken from the center of equal areas of
the duct cross section
External Static Pressure - Answers - ESP
Face Velocity - Answers - The average velocity
Fenestration - Answers - Any opening in a building structure such as windows,
skylights, window walls, doors, louvers, and access panels.
Function - Answers - The particular type of data measurement specified in NEBB
Standard for Instrumentation and Calibration
GRD - Answers - Grilles, Registers, Dampers
Grille - Answers - Louvered or perforated face over an opening with no balancing
damper integral to the device
High Efficiency Particulate Air Filter (HEPA) - Answers - An extended media, dry type
filter in a rigid frame having minimum particle-collection efficiency of 99.97 percent for .3
micron particulate at a rated airflow.
IP - Answers - Inch/Pound term used to describe measurement system used in the
United States and elsewhere
Absolute Value - Answers - The numerical value without regard to its sign
Acceleration - Answers - The vector quantity that specifies the time rate of change of
velocity
Accuracy - Answers - The capability of an instrument to indicate the true value of a
measured quantity
Adjusting - Answers - The varying of system flows by partially closing balancing devices
such as dampers and valves, and varying fan speeds to achieve optimum system
operating conditions within design and installation limitations
AHJ - Answers - The local governing authority having jurisdiction over a designated
portion of the project
Air Change Rate - Answers - The number of times the total air volume of a defined
space is replaced in a given unit of time.
Air Exchange Rate - Answers - The rate at which outdoor air replaces indoor air within a
given space or room
AHU - Answers - Air Handling Unit
Balancing - Answers - The methodical proportioning of air and hydronic flows through
the system mains, branches, and terminal devices using acceptable procedures to
achieve the specified airflow or hydronic flow within installation, testing, and design
limitations
Calibrate - Answers - The act of comparing an instrument of unknown accuracy with a
standard of known accuracy to detect, correlate, report, or correct by by adjustment
unacceptable variation in the accuracy of the tested instrument.
Conformed Contract Documents - Answers - Current and complete documents
Corrective Action - Answers - Repairing, replacing, re-building, calibrating, or adjusting
of equipment or systems
Deficiency - Answers - Any installation, measurement, or finding outside the tolerances
allowed by NEBB Procedural Standard or Project specifications.
Differential Pressure - Answers - The difference between two pressures measured with
respect to the same reference pressure
, Diffuser - Answers - Outlet designed to mix supply air and room air, and to distribute it in
varying directions
Diversity - Answers - The term used to describe the difference in air or water volume
between the prime mover (fan or pump) and the terminal elements.
Direct Expansion refrigerant type system - Answers - DX
Embedded Motor - Answers - Any motor that is inaccessible without disassembling the
equipment it is mounted in
EOR - Answers - Engineer Of Record. The engineer responsible for project plans and
specifications
Environmental Systems - Answers - Systems using a combination of mechanical
equipment, airflow, water flow, and electrical energy to provide heating, ventilating, air
conditioning, humidification, and de-humidification for the purpose of human comfort or
process control of temperature and humidity
Equal Area Method - Answers - Term used to describe the more common method of
duct traversing by averaging velocity readings taken from the center of equal areas of
the duct cross section
External Static Pressure - Answers - ESP
Face Velocity - Answers - The average velocity
Fenestration - Answers - Any opening in a building structure such as windows,
skylights, window walls, doors, louvers, and access panels.
Function - Answers - The particular type of data measurement specified in NEBB
Standard for Instrumentation and Calibration
GRD - Answers - Grilles, Registers, Dampers
Grille - Answers - Louvered or perforated face over an opening with no balancing
damper integral to the device
High Efficiency Particulate Air Filter (HEPA) - Answers - An extended media, dry type
filter in a rigid frame having minimum particle-collection efficiency of 99.97 percent for .3
micron particulate at a rated airflow.
IP - Answers - Inch/Pound term used to describe measurement system used in the
United States and elsewhere