COG200 STUDY EXAMS GUIDE QUESTIONS AND
ANSWERS FIRM A+
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User- Display Tab - Show Display tab - ✔✔This option must be
selected for the Display tab to appear at all. When the display tab is not available to the
user, the columns marked as required or default will be the only columns inside the
report results.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Display Tab- Support column icons - - ✔✔If this is
selected, the user can create a custom column that can display an icon instead of text.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Appearance Tab- - ✔✔The Appearance tab configures
the font and colors of the report results. In addition, the user could setup formatting
overrides if they are allowed.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Summary Tab- - ✔✔The Summary tab allows the user to
summarize the data in the report.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Summary Tab-Show summary tab- - ✔✔This option must
be selected for the Summary tab to appear at all. If this is not selected, summarization
will not be possible in this template's reports. This option also controls if the Explore tab
will appear automatically for reports with less than the maximum number of results.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Print Layout Tab- - ✔✔The Print layout tab allows the
user to determine how the report should look if printed out as hard copy.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Print Layout Tab- Support list printing - ✔✔This option
must be selected for the Print Layout tab to appear at all. If it is not selected, users will
only be able to print 'as is' from the Results Viewer.
✔✔Chapter 2 -Changing the Way the End User Sees the Report- Reports built from a
template can be shared. What controls this? - ✔✔Allow user to share reports is selected
✔✔Chapter 2 -Changing the Way the End User Sees the Report- A template searches
the EPT master file, and searches by record rather than by contact. What is set on the
User Interface form to let end users know what the template searches? - ✔✔Search
hyperlink says Patients
,✔✔Chapter 2 -Changing the Way the End User Sees the Report- Reports run from a
template cannot include graphs. How can you tell? - ✔✔Show Summary tab is not
checked off
✔✔Chapter 2 -Changing the Way the End User Sees the Report- When a report is
created from a template, the ENCOUNTER DX parameter will not automatically be
selected. How can you tell? - ✔✔ENCOUNTER DX is not marked as a Default
parameter
✔✔Chapter 2 -Changing the Way the End User Sees the Report- End users will never
have the ability to set the Current PCP Eff Date or Current PCP Term Date parameters.
In fact, they'll never even see those parameters. How can you tell? - ✔✔The parameters
both have the Visible box unchecked
✔✔Chapter 2 -Changing the Way the End User Sees the Report- The Problem and
Status parameters will both appear in Report Settings under a related group called
"Problems". If you wanted them to appear under a related group
called "Medical Issues", how could you do this? - ✔✔With either of these parameters
selected, change Group caption to "Medical Issues"
✔✔Chapter 2 -Changing the Way the End User Sees the Report- Do all of the
parameters visible in Query Template > Parameters appear in User Interface >
Parameters? - ✔✔Not if they are not added.
✔✔Chapter 2 -Changing the Way the End User Sees the Report- Should you remove
Parameters from Query Template > Parameters section? - ✔✔No. Parameters should
never be removed from the Query Template > Parameters section. If a parameter
should not be seen by the end user, remove it from the User Interface >
Parameter section instead.
✔✔Chapter 2 -Changing the Way the End User Sees the Report- What is the difference
between a query template and a report template? - ✔✔A query template specifies the
master files to be searched and the parameters it can be searched by. A report template
specifies how end users will be able to interact with the query template. Many report
templates can be built for one query template.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-A report is built from a
report template, which uses a query template. Will a user looking at the
report necessarily see all the parameters specified on the query template? - ✔✔No ‐ If
the parameter is not included in the report template or is marked invisible, the end user
won't see it
, ✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- T or F , You can add display columns from any of the master files that
the template knows how to handle. - ✔✔You can add display columns from any of the
master files that the template knows how to handle. You can display information from
the base search master file and any master file you
have already networked out to.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- A template can display information from which Master Files? - ✔✔By
default, a template can display information from several recognized master files. A
template can display information from the base search master file, or from a master file
it knows how to network to.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Can a parameter on the query template search a non‐base master
file? - ✔✔Yes, If a parameter on the query template searches a non‐base master file,
then you can add columns to the template that display from the same master file. The
columns you add will try to use the same networked path as the networked parameter
uses.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Where can you choose the Available and Selected
Columns that will appear on the Display tab? - ✔✔The Viewer > Columns form of the
Template Editor
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Where do you click to add a new or existing display column to your
template? - ✔✔in Viewer > Columns, click Create/Find
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Where do you configure how the end user
will be able to interact with the column? - ✔✔Viewer > Columns form
Available columns
Default
Required
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- What columns will be included Under Viewer > Columns
form>Available columns - ✔✔Columns that will be included in reports built from this
template.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Will columns listed Under Viewer > Columns form>Available columns
NOT marked as default be included in reports? - ✔✔Yes BUT Columns listed here but
ANSWERS FIRM A+
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User- Display Tab - Show Display tab - ✔✔This option must be
selected for the Display tab to appear at all. When the display tab is not available to the
user, the columns marked as required or default will be the only columns inside the
report results.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Display Tab- Support column icons - - ✔✔If this is
selected, the user can create a custom column that can display an icon instead of text.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Appearance Tab- - ✔✔The Appearance tab configures
the font and colors of the report results. In addition, the user could setup formatting
overrides if they are allowed.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Summary Tab- - ✔✔The Summary tab allows the user to
summarize the data in the report.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Summary Tab-Show summary tab- - ✔✔This option must
be selected for the Summary tab to appear at all. If this is not selected, summarization
will not be possible in this template's reports. This option also controls if the Explore tab
will appear automatically for reports with less than the maximum number of results.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Print Layout Tab- - ✔✔The Print layout tab allows the
user to determine how the report should look if printed out as hard copy.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-Choosing Which Tabs
Are Available to the End User-Print Layout Tab- Support list printing - ✔✔This option
must be selected for the Print Layout tab to appear at all. If it is not selected, users will
only be able to print 'as is' from the Results Viewer.
✔✔Chapter 2 -Changing the Way the End User Sees the Report- Reports built from a
template can be shared. What controls this? - ✔✔Allow user to share reports is selected
✔✔Chapter 2 -Changing the Way the End User Sees the Report- A template searches
the EPT master file, and searches by record rather than by contact. What is set on the
User Interface form to let end users know what the template searches? - ✔✔Search
hyperlink says Patients
,✔✔Chapter 2 -Changing the Way the End User Sees the Report- Reports run from a
template cannot include graphs. How can you tell? - ✔✔Show Summary tab is not
checked off
✔✔Chapter 2 -Changing the Way the End User Sees the Report- When a report is
created from a template, the ENCOUNTER DX parameter will not automatically be
selected. How can you tell? - ✔✔ENCOUNTER DX is not marked as a Default
parameter
✔✔Chapter 2 -Changing the Way the End User Sees the Report- End users will never
have the ability to set the Current PCP Eff Date or Current PCP Term Date parameters.
In fact, they'll never even see those parameters. How can you tell? - ✔✔The parameters
both have the Visible box unchecked
✔✔Chapter 2 -Changing the Way the End User Sees the Report- The Problem and
Status parameters will both appear in Report Settings under a related group called
"Problems". If you wanted them to appear under a related group
called "Medical Issues", how could you do this? - ✔✔With either of these parameters
selected, change Group caption to "Medical Issues"
✔✔Chapter 2 -Changing the Way the End User Sees the Report- Do all of the
parameters visible in Query Template > Parameters appear in User Interface >
Parameters? - ✔✔Not if they are not added.
✔✔Chapter 2 -Changing the Way the End User Sees the Report- Should you remove
Parameters from Query Template > Parameters section? - ✔✔No. Parameters should
never be removed from the Query Template > Parameters section. If a parameter
should not be seen by the end user, remove it from the User Interface >
Parameter section instead.
✔✔Chapter 2 -Changing the Way the End User Sees the Report- What is the difference
between a query template and a report template? - ✔✔A query template specifies the
master files to be searched and the parameters it can be searched by. A report template
specifies how end users will be able to interact with the query template. Many report
templates can be built for one query template.
✔✔Chapter 2 -Changing the Way the End User Sees the Report-A report is built from a
report template, which uses a query template. Will a user looking at the
report necessarily see all the parameters specified on the query template? - ✔✔No ‐ If
the parameter is not included in the report template or is marked invisible, the end user
won't see it
, ✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- T or F , You can add display columns from any of the master files that
the template knows how to handle. - ✔✔You can add display columns from any of the
master files that the template knows how to handle. You can display information from
the base search master file and any master file you
have already networked out to.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- A template can display information from which Master Files? - ✔✔By
default, a template can display information from several recognized master files. A
template can display information from the base search master file, or from a master file
it knows how to network to.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Can a parameter on the query template search a non‐base master
file? - ✔✔Yes, If a parameter on the query template searches a non‐base master file,
then you can add columns to the template that display from the same master file. The
columns you add will try to use the same networked path as the networked parameter
uses.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Where can you choose the Available and Selected
Columns that will appear on the Display tab? - ✔✔The Viewer > Columns form of the
Template Editor
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Where do you click to add a new or existing display column to your
template? - ✔✔in Viewer > Columns, click Create/Find
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Where do you configure how the end user
will be able to interact with the column? - ✔✔Viewer > Columns form
Available columns
Default
Required
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- What columns will be included Under Viewer > Columns
form>Available columns - ✔✔Columns that will be included in reports built from this
template.
✔✔Chapter 3 - Changing the Columns on the Display Tab- Adding a Column from the
Base Master File- Will columns listed Under Viewer > Columns form>Available columns
NOT marked as default be included in reports? - ✔✔Yes BUT Columns listed here but
