LEED-GREEN-ASSOCIATE: LEADERSHIP IN ENERGY AND ENVIRONMENTAL DESIGN
FUNDAMENTALS | REAL EXAM QUESTIONS AND 100% VERIFIED ANSWERS |
COMPLETE EXAM 2026/2027 | PASS GUARANTEE
LEED-Green-Associate (Leadership in Energy and Environmental Design Fundamentals)
1. What does LEED stand for?
A. Leadership in Environmental Energy Design
B. Leadership in Energy and Environmental Design
C. Leadership in Efficient Energy Development
D. Leadership in Environmental Engineering Design
2. Which organization developed and administers the LEED rating system?
A. American Institute of Architects (AIA)
B. U.S. Environmental Protection Agency (EPA)
C. U.S. Green Building Council (USGBC)
D. National Institute of Building Sciences (NIBS)
3. Which of the following is NOT one of the LEED rating system categories?
A. Building Design and Construction
B. Interior Design and Construction
C. Neighborhood Development
D. Energy and Atmosphere Management
4. What is the minimum number of points required to achieve LEED Certified
status?
A. 30 points
B. 40 points
C. 50 points
D. 60 points
5. How many points are required for LEED Silver certification?
A. 40-49 points
B. 50-59 points
C. 60-79 points
, D. 80+ points
6. How many points are required for LEED Gold certification?
A. 50-59 points
B. 60-79 points
C. 70-89 points
D. 80+ points
7. How many points are required for LEED Platinum certification?
A. 70+ points
B. 75+ points
C. 80+ points
D. 85+ points
8. What is the maximum number of points available in the LEED v4 BD+C rating
system?
A. 100 points
B. 110 points
C. 120 points
D. 130 points
9. Which LEED credit category typically carries the most available points in
BD+C?
A. Water Efficiency
B. Materials and Resources
C. Energy and Atmosphere
D. Indoor Environmental Quality
10. What does the Integrative Process credit in LEED encourage?
A. Using only local materials
B. Early analysis and coordination among design disciplines
C. Reducing energy consumption by 50%
D. Achieving net-zero water use
11. Which of the following is a prerequisite in the Energy and Atmosphere
category of LEED BD+C?
A. Optimize Energy Performance
B. Renewable Energy Production
, C. Fundamental Commissioning and Verification
D. Demand Response
12. What does commissioning (Cx) refer to in a green building context?
A. Obtaining a certificate of occupancy
B. Verifying that building systems perform as designed
C. Hiring a contractor to manage construction
D. Applying for a LEED certification
13. What is a prerequisite in LEED?
A. An optional credit that adds bonus points
B. A mandatory requirement that must be met to achieve certification
C. A credit worth double points
D. A documentation requirement only
14. Which category addresses site selection, transportation access, and community
connectivity in LEED BD+C?
A. Sustainable Sites
B. Location and Transportation
C. Regional Priority
D. Innovation
15. What is the purpose of the Regional Priority credit in LEED?
A. To award bonus points for achieving certain credits particularly
important to a local region
B. To require locally sourced materials
C. To apply different certification thresholds by region
D. To allow exemptions from prerequisites
16. What does EPD stand for in the context of LEED Materials and Resources?
A. Environmental Performance Document
B. Environmental Product Declaration
C. Energy Performance Data
D. Ecological Product Designation
17. What does an EPD disclose about a product?
A. Cost and availability of materials
B. Life-cycle environmental impact of a product
, C. Structural performance specifications
D. Fire resistance ratings
18. What does LCA stand for in green building?
A. Low-Carbon Analysis
B. Life-Cycle Assessment
C. LEED Certified Assessment
D. Land Conservation Agreement
19. What is the primary goal of the Water Efficiency category in LEED?
A. To achieve zero stormwater runoff
B. To reduce indoor and outdoor water consumption
C. To eliminate all greywater discharge
D. To require rainwater harvesting on all projects
20. Which of the following is a prerequisite in the Water Efficiency category of
LEED BD+C?
A. Cooling Tower Water Use
B. Outdoor Water Use Reduction
C. Indoor Water Use Reduction
D. Both B and C
21. What is a heat island effect?
A. Increased indoor temperatures due to poor insulation
B. Elevated temperatures in urban areas compared to surrounding rural
areas
C. Thermal bridging through building envelopes
D. Increased solar heat gain through glazing
22. Which LEED credit addresses reducing the heat island effect?
A. Green Power and Carbon Offsets
B. Heat Island Reduction (under Sustainable Sites)
C. Optimized Energy Performance
D. Daylight and Views
23. What is a brownfield site?
A. A site that has never been developed
B. A site with wetlands and native vegetation
FUNDAMENTALS | REAL EXAM QUESTIONS AND 100% VERIFIED ANSWERS |
COMPLETE EXAM 2026/2027 | PASS GUARANTEE
LEED-Green-Associate (Leadership in Energy and Environmental Design Fundamentals)
1. What does LEED stand for?
A. Leadership in Environmental Energy Design
B. Leadership in Energy and Environmental Design
C. Leadership in Efficient Energy Development
D. Leadership in Environmental Engineering Design
2. Which organization developed and administers the LEED rating system?
A. American Institute of Architects (AIA)
B. U.S. Environmental Protection Agency (EPA)
C. U.S. Green Building Council (USGBC)
D. National Institute of Building Sciences (NIBS)
3. Which of the following is NOT one of the LEED rating system categories?
A. Building Design and Construction
B. Interior Design and Construction
C. Neighborhood Development
D. Energy and Atmosphere Management
4. What is the minimum number of points required to achieve LEED Certified
status?
A. 30 points
B. 40 points
C. 50 points
D. 60 points
5. How many points are required for LEED Silver certification?
A. 40-49 points
B. 50-59 points
C. 60-79 points
, D. 80+ points
6. How many points are required for LEED Gold certification?
A. 50-59 points
B. 60-79 points
C. 70-89 points
D. 80+ points
7. How many points are required for LEED Platinum certification?
A. 70+ points
B. 75+ points
C. 80+ points
D. 85+ points
8. What is the maximum number of points available in the LEED v4 BD+C rating
system?
A. 100 points
B. 110 points
C. 120 points
D. 130 points
9. Which LEED credit category typically carries the most available points in
BD+C?
A. Water Efficiency
B. Materials and Resources
C. Energy and Atmosphere
D. Indoor Environmental Quality
10. What does the Integrative Process credit in LEED encourage?
A. Using only local materials
B. Early analysis and coordination among design disciplines
C. Reducing energy consumption by 50%
D. Achieving net-zero water use
11. Which of the following is a prerequisite in the Energy and Atmosphere
category of LEED BD+C?
A. Optimize Energy Performance
B. Renewable Energy Production
, C. Fundamental Commissioning and Verification
D. Demand Response
12. What does commissioning (Cx) refer to in a green building context?
A. Obtaining a certificate of occupancy
B. Verifying that building systems perform as designed
C. Hiring a contractor to manage construction
D. Applying for a LEED certification
13. What is a prerequisite in LEED?
A. An optional credit that adds bonus points
B. A mandatory requirement that must be met to achieve certification
C. A credit worth double points
D. A documentation requirement only
14. Which category addresses site selection, transportation access, and community
connectivity in LEED BD+C?
A. Sustainable Sites
B. Location and Transportation
C. Regional Priority
D. Innovation
15. What is the purpose of the Regional Priority credit in LEED?
A. To award bonus points for achieving certain credits particularly
important to a local region
B. To require locally sourced materials
C. To apply different certification thresholds by region
D. To allow exemptions from prerequisites
16. What does EPD stand for in the context of LEED Materials and Resources?
A. Environmental Performance Document
B. Environmental Product Declaration
C. Energy Performance Data
D. Ecological Product Designation
17. What does an EPD disclose about a product?
A. Cost and availability of materials
B. Life-cycle environmental impact of a product
, C. Structural performance specifications
D. Fire resistance ratings
18. What does LCA stand for in green building?
A. Low-Carbon Analysis
B. Life-Cycle Assessment
C. LEED Certified Assessment
D. Land Conservation Agreement
19. What is the primary goal of the Water Efficiency category in LEED?
A. To achieve zero stormwater runoff
B. To reduce indoor and outdoor water consumption
C. To eliminate all greywater discharge
D. To require rainwater harvesting on all projects
20. Which of the following is a prerequisite in the Water Efficiency category of
LEED BD+C?
A. Cooling Tower Water Use
B. Outdoor Water Use Reduction
C. Indoor Water Use Reduction
D. Both B and C
21. What is a heat island effect?
A. Increased indoor temperatures due to poor insulation
B. Elevated temperatures in urban areas compared to surrounding rural
areas
C. Thermal bridging through building envelopes
D. Increased solar heat gain through glazing
22. Which LEED credit addresses reducing the heat island effect?
A. Green Power and Carbon Offsets
B. Heat Island Reduction (under Sustainable Sites)
C. Optimized Energy Performance
D. Daylight and Views
23. What is a brownfield site?
A. A site that has never been developed
B. A site with wetlands and native vegetation
