NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
1. How is the process of steel corrosion ALWAYS described?:
electrochemical
2. Based on the galvanic series presented in the NACE CIP
Level 1 Manual, which three can be used effectively as
galvanic anodes for carbon steel?: zinc, aluminum, magnesium
3. A
decrease in temperature will generally cause the corrosion
rate to :-
decrease
4. The electrolyte is a medium which carries the following
type of current?: Ionic
5. Corrosion
occurring uniformly across a surface is called : general
corrosion
6. When a conflict occurs on a coatings
project, as the inspector, the preferred first course of action is
to : actively listen and endeavor to understand the
positions of others
7. A
proper coating specification should contain information
regarding ,
, and : surface preparation standards, safety, and locations to be used
,NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
8. Is it ever okay to accept a gift from a contractor?: NO
9. What should you do if you find discrepancies between the
specification and the coating manufacturer's technical data sheet?:
seek written clarification from the owner's representative
10. What are the general components of inspection reports?: -
results of inspection tests
- location(s) of work
- details of preparation and application
11. Inspection reports typically provide sufficient detail
permitting the owner to evaluate : - contractor's
performance
- inspector's performance
- job progress
- work interruptions
12. As an inspector headed to the job site for the first
time, where would you always find instruction regarding
appropriate types of PPE?: Safety Data Sheet (SDS), previously
called MSDS
13. Materials inventory report should contain which of the
following?: - quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
,NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
14. The primary function of the coating inspector is :
specification compliance
, NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
15. High
humidity in the air during coating application can cause :
solvent entrapment
16. T
he temperature at which moisture condenses on a surface
is called -
: dew point
17. Where should the steel surface temperature reading be
taken?: at the actual work location
18. What type of water should be added to a sling
psychrometer?: distilled
19. Which type of coating is manufactured with the
specific components added to slow down the activity of the
electrochemical cell?: inhibitive
20. Which coating component forms a stable film that
retains its characteristic properties?: binder/resin
21. A barrier coating interrupts
the of the electrochemical cell.:
electrolyte
22. List the three mechanisms by which coatings adhere to
a substrate: 1. Polar
2. Chemical
QUESTIONS) ACCURATE AND VERIFIED
1. How is the process of steel corrosion ALWAYS described?:
electrochemical
2. Based on the galvanic series presented in the NACE CIP
Level 1 Manual, which three can be used effectively as
galvanic anodes for carbon steel?: zinc, aluminum, magnesium
3. A
decrease in temperature will generally cause the corrosion
rate to :-
decrease
4. The electrolyte is a medium which carries the following
type of current?: Ionic
5. Corrosion
occurring uniformly across a surface is called : general
corrosion
6. When a conflict occurs on a coatings
project, as the inspector, the preferred first course of action is
to : actively listen and endeavor to understand the
positions of others
7. A
proper coating specification should contain information
regarding ,
, and : surface preparation standards, safety, and locations to be used
,NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
8. Is it ever okay to accept a gift from a contractor?: NO
9. What should you do if you find discrepancies between the
specification and the coating manufacturer's technical data sheet?:
seek written clarification from the owner's representative
10. What are the general components of inspection reports?: -
results of inspection tests
- location(s) of work
- details of preparation and application
11. Inspection reports typically provide sufficient detail
permitting the owner to evaluate : - contractor's
performance
- inspector's performance
- job progress
- work interruptions
12. As an inspector headed to the job site for the first
time, where would you always find instruction regarding
appropriate types of PPE?: Safety Data Sheet (SDS), previously
called MSDS
13. Materials inventory report should contain which of the
following?: - quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
,NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
14. The primary function of the coating inspector is :
specification compliance
, NACE CIP 1 CBT EXAM (QUIZZES AND STUDY
QUESTIONS) ACCURATE AND VERIFIED
15. High
humidity in the air during coating application can cause :
solvent entrapment
16. T
he temperature at which moisture condenses on a surface
is called -
: dew point
17. Where should the steel surface temperature reading be
taken?: at the actual work location
18. What type of water should be added to a sling
psychrometer?: distilled
19. Which type of coating is manufactured with the
specific components added to slow down the activity of the
electrochemical cell?: inhibitive
20. Which coating component forms a stable film that
retains its characteristic properties?: binder/resin
21. A barrier coating interrupts
the of the electrochemical cell.:
electrolyte
22. List the three mechanisms by which coatings adhere to
a substrate: 1. Polar
2. Chemical
