AUMT BRAKE FINAL EXAM QUESTIONS AND
ANSWERS WITH COMPLETE SOLUTION | NEW
UPDATE 2026
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Both A and B
Choose an answer
Tech A says that parking brakes on drum brake vehicles use separate brake shoes
1 for backup in an emergency. Tech B says that parking brakes on drum brake vehicles
mechanically operate the standard drum brake shoes. Who iscorrect?
2 When the driver releases the brake pedal, the brake shoes are withdrawn by the:
Tech A says that chrome plated pistons resist rust. Tech B says that pistons made of
3
phenolic resin do not corrode and transmit less heat. Who is correct?
, Tech A says that most brake drums are designed to be machined if minor surface
4 issues are present. Tech B says that brake drums can be reused if they are machined
larger than specifications, as long as the surface is smooth. Who is correct?
Don't know?
Terms in this set (131)
Tech A says that parking brakes on Tech B
drum brake vehicles use separate
brake shoes for backup in an
emergency. Tech B says that
parking brakes on drum brake
vehicles mechanically operate the
standard drum brake shoes. Who
iscorrect?
Which of these drum brake systems Duo-servo drum brake systems
uses servo action in both
directions?
Tech A says that brake shoe linings Tech B
saturated with brake fluid from a
leaky wheel cylinder can be
cleaned with brake cleaner and
reused as long as they aren't worn
out. Tech B says that brake shoes
should be replaced in axle sets.
Who is correct?
, Tech A says that a metal-on-metal both A and B
grinding noise in drum brakes
generally requires replacing the
brake shoes and resurfacing or
replacing the drums. Tech B says
that one way to help identify
whether a problem is coming from
the front or rear brakes is to test-
drive the vehicle in a safe place at a
relatively low speed and lightly
apply the parking brake. Who is
correct?
Tech A says that most brake drums Tech A
are designed to be machined if
minor surface issues are present.
Tech B says that brake drums can
be reused if they are machined
larger than specifications, as long
as the surface is smooth. Who is
correct?
All of the following statements with It is standard practice to hone out deep pits in
respect to a wheel cylinder and the wheel cylinder bore.
piston are true EXCEPT:
The component of the drum brake wheel cylinder
system attached to the backing
plate is the:
ANSWERS WITH COMPLETE SOLUTION | NEW
UPDATE 2026
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Both A and B
Choose an answer
Tech A says that parking brakes on drum brake vehicles use separate brake shoes
1 for backup in an emergency. Tech B says that parking brakes on drum brake vehicles
mechanically operate the standard drum brake shoes. Who iscorrect?
2 When the driver releases the brake pedal, the brake shoes are withdrawn by the:
Tech A says that chrome plated pistons resist rust. Tech B says that pistons made of
3
phenolic resin do not corrode and transmit less heat. Who is correct?
, Tech A says that most brake drums are designed to be machined if minor surface
4 issues are present. Tech B says that brake drums can be reused if they are machined
larger than specifications, as long as the surface is smooth. Who is correct?
Don't know?
Terms in this set (131)
Tech A says that parking brakes on Tech B
drum brake vehicles use separate
brake shoes for backup in an
emergency. Tech B says that
parking brakes on drum brake
vehicles mechanically operate the
standard drum brake shoes. Who
iscorrect?
Which of these drum brake systems Duo-servo drum brake systems
uses servo action in both
directions?
Tech A says that brake shoe linings Tech B
saturated with brake fluid from a
leaky wheel cylinder can be
cleaned with brake cleaner and
reused as long as they aren't worn
out. Tech B says that brake shoes
should be replaced in axle sets.
Who is correct?
, Tech A says that a metal-on-metal both A and B
grinding noise in drum brakes
generally requires replacing the
brake shoes and resurfacing or
replacing the drums. Tech B says
that one way to help identify
whether a problem is coming from
the front or rear brakes is to test-
drive the vehicle in a safe place at a
relatively low speed and lightly
apply the parking brake. Who is
correct?
Tech A says that most brake drums Tech A
are designed to be machined if
minor surface issues are present.
Tech B says that brake drums can
be reused if they are machined
larger than specifications, as long
as the surface is smooth. Who is
correct?
All of the following statements with It is standard practice to hone out deep pits in
respect to a wheel cylinder and the wheel cylinder bore.
piston are true EXCEPT:
The component of the drum brake wheel cylinder
system attached to the backing
plate is the:
