CLCP Actual Exam Study Questions
with Expert Graded A+ Answers |
Brand New Version
1. CLCP Categories of expertise or 3 "Domains of Knowledge" - ANSWER
(1) Assessing Client's Medical and Independent Living Needs (2) Vocational
Assessment (3) Consultant Services to the Legal System
2. Which of the following is a potential benefit of a networked lighting control
system? - ANSWER Automatic lighting controls
Control of lighting from the internet
A central control device for lighting, shades, and heating
3. All lighting control systems, particularly more complex designs, should be
described in a written document called the ____. - ANSWER Controls
narrative, including a detailed sequence of operations
4. Which of the below is a popular example of a useful application of data
pulled from an interior Smart LLLC system? - ANSWER Space utilization
5. Which of the below is an advantage of LLLC during installation? -
ANSWER LLLC with wireless communication eliminates installation of
control wiring
Sensors, controllers, and drivers are pre-tested as compatible
Depending on the type of LLLC and the project needs, there can be fewer or
eliminated requirements to mount external sensors
All of the above
,6. A common warm-cool gamut control approach to tunable-white LED
lighting is _____ - ANSWER A dimming control operating with two
dimmable LED drivers, each with a separate control input
7. Typically, tunable-white LED lighting systems change CCT via _____. -
ANSWER Separately dimming warm- and cool-white phosphor-coated
LEDs
8. The U.S. Department of Energy recommends a dimmer/driver pairing should
not produce a % Flicker greater than _____ x 0.08. - ANSWER Flicker
range
9. Visible white light requires the combination of at least _____ colors, which
are ______. - ANSWER Three; red, blue and green
10.Deviation from the blackbody locus can result in white light appearing
_____. - ANSWER Tinted greenish
11.Which of the below products would be best suited for an application where
the sole color-tuning need is to imitate the appearance of incandescent
dimming? - ANSWER Dim-to-warm
12.Which of the below correlated color temperatures is visually "cool"? -
ANSWER 5000K
13.Some tunable-white LED products add colors to the warm-cool mix so that
the light emission's color output _____. - ANSWER More closely follows
the blackbody locus
,14.Pairing a square-law dimming curve LED driver and a square-law dimming
curve dimmer will produce _____. - ANSWER Dimming with a power-law,
also called logarithmic, curve
15.Which of the below correlated color temperatures is visually "neutral"? -
ANSWER 3500K
16.Using ______ attached to inventory, a lighting system embedded with
beacons can locate the inventory via an app. - ANSWER RFID tags
17.For a networked lighting control system to interact with a fully realized IoT
solution, data from its end-use devices is sent to ______, where it is passed
on to other systems and devices. - ANSWER A central server or the Cloud
18.The 300 in the $/sq.ft. commercial building operating cost rule of thumb is
______. - ANSWER Salaries and benefits
19.Indoor positioning refers to _____. - ANSWER The ability to navigate to
rooms or devices within a building
20.What is the name of the visual that most touchscreens use? - ANSWER
Graphical User Interface
21.Graphical User Interfaces can be customized for the application. -
ANSWER True
22.A(n) _____ can help guide you in designing your networked lighting control
system. - ANSWER Consultant
, 23.Which of the following is a lighting control? - ANSWER A light switch on
the wall
A touchscreen
An occupancy sensor
24.What does NLC stand for? - ANSWER Networked Lighting Controls
25.Smartphones can control lighting and other systems in a networked lighting
control system. - ANSWER True
26.Future-proofing a networked lighting control system entails _____. -
ANSWER A maintenance plan and ways to upgrade in the future
27.Networked lighting controls can also control _____. - ANSWER Heating
and cooling
28.At a minimum, a luminaire-level lighting control (LLLC) system consists of
luminaires with which of the following installed? - ANSWER One or more
sensors
29.A centrally controlled wireless LLLC network may include which of the
following components? - ANSWER Central server or Cloud storage
Hubs or gateways
Software
30.As a lighting control option, LLLC is most commonly installed in ____
applications - ANSWER Office building and school
with Expert Graded A+ Answers |
Brand New Version
1. CLCP Categories of expertise or 3 "Domains of Knowledge" - ANSWER
(1) Assessing Client's Medical and Independent Living Needs (2) Vocational
Assessment (3) Consultant Services to the Legal System
2. Which of the following is a potential benefit of a networked lighting control
system? - ANSWER Automatic lighting controls
Control of lighting from the internet
A central control device for lighting, shades, and heating
3. All lighting control systems, particularly more complex designs, should be
described in a written document called the ____. - ANSWER Controls
narrative, including a detailed sequence of operations
4. Which of the below is a popular example of a useful application of data
pulled from an interior Smart LLLC system? - ANSWER Space utilization
5. Which of the below is an advantage of LLLC during installation? -
ANSWER LLLC with wireless communication eliminates installation of
control wiring
Sensors, controllers, and drivers are pre-tested as compatible
Depending on the type of LLLC and the project needs, there can be fewer or
eliminated requirements to mount external sensors
All of the above
,6. A common warm-cool gamut control approach to tunable-white LED
lighting is _____ - ANSWER A dimming control operating with two
dimmable LED drivers, each with a separate control input
7. Typically, tunable-white LED lighting systems change CCT via _____. -
ANSWER Separately dimming warm- and cool-white phosphor-coated
LEDs
8. The U.S. Department of Energy recommends a dimmer/driver pairing should
not produce a % Flicker greater than _____ x 0.08. - ANSWER Flicker
range
9. Visible white light requires the combination of at least _____ colors, which
are ______. - ANSWER Three; red, blue and green
10.Deviation from the blackbody locus can result in white light appearing
_____. - ANSWER Tinted greenish
11.Which of the below products would be best suited for an application where
the sole color-tuning need is to imitate the appearance of incandescent
dimming? - ANSWER Dim-to-warm
12.Which of the below correlated color temperatures is visually "cool"? -
ANSWER 5000K
13.Some tunable-white LED products add colors to the warm-cool mix so that
the light emission's color output _____. - ANSWER More closely follows
the blackbody locus
,14.Pairing a square-law dimming curve LED driver and a square-law dimming
curve dimmer will produce _____. - ANSWER Dimming with a power-law,
also called logarithmic, curve
15.Which of the below correlated color temperatures is visually "neutral"? -
ANSWER 3500K
16.Using ______ attached to inventory, a lighting system embedded with
beacons can locate the inventory via an app. - ANSWER RFID tags
17.For a networked lighting control system to interact with a fully realized IoT
solution, data from its end-use devices is sent to ______, where it is passed
on to other systems and devices. - ANSWER A central server or the Cloud
18.The 300 in the $/sq.ft. commercial building operating cost rule of thumb is
______. - ANSWER Salaries and benefits
19.Indoor positioning refers to _____. - ANSWER The ability to navigate to
rooms or devices within a building
20.What is the name of the visual that most touchscreens use? - ANSWER
Graphical User Interface
21.Graphical User Interfaces can be customized for the application. -
ANSWER True
22.A(n) _____ can help guide you in designing your networked lighting control
system. - ANSWER Consultant
, 23.Which of the following is a lighting control? - ANSWER A light switch on
the wall
A touchscreen
An occupancy sensor
24.What does NLC stand for? - ANSWER Networked Lighting Controls
25.Smartphones can control lighting and other systems in a networked lighting
control system. - ANSWER True
26.Future-proofing a networked lighting control system entails _____. -
ANSWER A maintenance plan and ways to upgrade in the future
27.Networked lighting controls can also control _____. - ANSWER Heating
and cooling
28.At a minimum, a luminaire-level lighting control (LLLC) system consists of
luminaires with which of the following installed? - ANSWER One or more
sensors
29.A centrally controlled wireless LLLC network may include which of the
following components? - ANSWER Central server or Cloud storage
Hubs or gateways
Software
30.As a lighting control option, LLLC is most commonly installed in ____
applications - ANSWER Office building and school
