MP100 Cycle 3 Review (MP100)
Questions and Answers Exam
Should a compressor be patched across the aux send or insert? - ANSWER>>Insert
What is a high-pass and low-pass filter used in conjunction?
A. a plugo filter
B. a ban
C. post-war filter
D. a band-pass filter - ANSWER>>D. a band-pass filter
On a high/low pass filter, frequencies attenuated more than 3dB are in the
___________.
A. turnover
B. stopband
C. passband - ANSWER>>B. Stopband
On a high/low pass filter, frequencies attenuated less than 3dB are in the
___________.
A. filter
B. stopband
C. passband - ANSWER>>C. Passband
What is a Y-split on the Neotek and how is it achieved?
, A. A Y-split is an adapter that allows 2 devices to receive the output from from a
single source. The split is achieved by plugging the Y-split into the jack and
plugging two separate male ends into the female ends of the adapter.
B. A Y-split is the use of the output of any fader to send to mutiple destinations. It
is achieved by directing the output of a fader to the multitrack bus and either
selecting more than one output, and/or by simply not utilizing the track pan
(leaving it in the "noon" postition).
C. A Y-split is a pre Fader Fader split into the Monitor Fader, after being processed
by an insert, filter, or EQ. It is achieved by pressing both "IN" buttons in your
processor section on any I/O.
D. A Y-split is a fancy name for multiplying a single signal and directing it to
multiple pieces of gear or multiple inputs on one piece of gear. It is achieve -
ANSWER>>C. A Y-split is a pre Fader Fader split into the Monitor Fader, after
being processed by an insert, filter, or EQ. It is achieved by pressing both "IN"
buttons in your processor section on any I/O.
What is the highest frequency the High Pass Filter can be dialed to on the Neotek?
- ANSWER>>375
True or False: When mixing, your auxiliary send(s) for purposes of parallel
compression should be post-fader. - ANSWER>>False
What mode should the MTR-90 be in for a mixing session?
a. All Sel-Rep
b. Vari-speed
c. All Repro
d. All Input
e. Zero Set - ANSWER>>C. All Repro
Questions and Answers Exam
Should a compressor be patched across the aux send or insert? - ANSWER>>Insert
What is a high-pass and low-pass filter used in conjunction?
A. a plugo filter
B. a ban
C. post-war filter
D. a band-pass filter - ANSWER>>D. a band-pass filter
On a high/low pass filter, frequencies attenuated more than 3dB are in the
___________.
A. turnover
B. stopband
C. passband - ANSWER>>B. Stopband
On a high/low pass filter, frequencies attenuated less than 3dB are in the
___________.
A. filter
B. stopband
C. passband - ANSWER>>C. Passband
What is a Y-split on the Neotek and how is it achieved?
, A. A Y-split is an adapter that allows 2 devices to receive the output from from a
single source. The split is achieved by plugging the Y-split into the jack and
plugging two separate male ends into the female ends of the adapter.
B. A Y-split is the use of the output of any fader to send to mutiple destinations. It
is achieved by directing the output of a fader to the multitrack bus and either
selecting more than one output, and/or by simply not utilizing the track pan
(leaving it in the "noon" postition).
C. A Y-split is a pre Fader Fader split into the Monitor Fader, after being processed
by an insert, filter, or EQ. It is achieved by pressing both "IN" buttons in your
processor section on any I/O.
D. A Y-split is a fancy name for multiplying a single signal and directing it to
multiple pieces of gear or multiple inputs on one piece of gear. It is achieve -
ANSWER>>C. A Y-split is a pre Fader Fader split into the Monitor Fader, after
being processed by an insert, filter, or EQ. It is achieved by pressing both "IN"
buttons in your processor section on any I/O.
What is the highest frequency the High Pass Filter can be dialed to on the Neotek?
- ANSWER>>375
True or False: When mixing, your auxiliary send(s) for purposes of parallel
compression should be post-fader. - ANSWER>>False
What mode should the MTR-90 be in for a mixing session?
a. All Sel-Rep
b. Vari-speed
c. All Repro
d. All Input
e. Zero Set - ANSWER>>C. All Repro
