CVEN 446 EXAM PREP STUDY GUIDE
QUESTIONS ANSWERS COMPLETE
SOLUTION BUNDLE
●● Columns that buckle in the elastic region have higher design
strengths than columns that buckling in the inelastic region of behavior.
Answer: FALSE
●● A reduction or resistance factor (phi) of 0.85 is used for compression
members.
Answer: FALSE
●● The column design tables for W shapes (Table 4-1) can be directly
used for both axes of buckling (x- and y-axes).
Answer: FALSE
●● In the AISC Specification, local buckling modifies the buckling
capacity of a column by reducing the gross area to account of the loss of
cross section due to the local buckling of an cross sectional element.
Answer: TRUE
, ●● When determining the buckling capacity of a column that is
susceptible to local buckling, a lower critical buckling stress, Fcr, is
calculated.
Answer: FALSE
●● For columns, any cross sectional shape will have 3 possible global
buckling modes (flexural, flexural-torsional, and torsional).
Answer: FALSE
●● Buckling about and buckling in a given axis means the same thing.
Answer: FALSE
●● Connector spacing in built-up columns affect the buckling capacity
of both axes.
Answer: FALSE
●● Bending or flexure in a member is the result of axially applied loads.
Answer: FALSE
●● Internal shear and moment are the result of transverse loads and
applied moments acting on a beams.
Answer: TRUE
QUESTIONS ANSWERS COMPLETE
SOLUTION BUNDLE
●● Columns that buckle in the elastic region have higher design
strengths than columns that buckling in the inelastic region of behavior.
Answer: FALSE
●● A reduction or resistance factor (phi) of 0.85 is used for compression
members.
Answer: FALSE
●● The column design tables for W shapes (Table 4-1) can be directly
used for both axes of buckling (x- and y-axes).
Answer: FALSE
●● In the AISC Specification, local buckling modifies the buckling
capacity of a column by reducing the gross area to account of the loss of
cross section due to the local buckling of an cross sectional element.
Answer: TRUE
, ●● When determining the buckling capacity of a column that is
susceptible to local buckling, a lower critical buckling stress, Fcr, is
calculated.
Answer: FALSE
●● For columns, any cross sectional shape will have 3 possible global
buckling modes (flexural, flexural-torsional, and torsional).
Answer: FALSE
●● Buckling about and buckling in a given axis means the same thing.
Answer: FALSE
●● Connector spacing in built-up columns affect the buckling capacity
of both axes.
Answer: FALSE
●● Bending or flexure in a member is the result of axially applied loads.
Answer: FALSE
●● Internal shear and moment are the result of transverse loads and
applied moments acting on a beams.
Answer: TRUE