SACA C-101 Certification –
Manufacturing & Safety Exam Q&A||
GRADED A+|| LATEST UPDATE 2026
Function -CORRECTANSWER The three Fs of product design are form, fit and
__________.
Lean Manufacturing -CORRECTANSWER High product quality, quick delivery, low
costs are the primary goals of what system?
Standardize -CORRECTANSWER Which 5S step involves formatting 5S work
instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean
methods to be more successful -CORRECTANSWER How does the 5S method aid in
the goal of lean manufacturing?
HMI -CORRECTANSWER What is the interface used with CNC machines to load and
monitor programs?
PLC -CORRECTANSWER The automation of many different manufacturing processes
is done through the use of a small computer called a __________.
,An error message. -CORRECTANSWER When a machine stops due to an problem,
what would the machine's HMI typically display?
Industry 4.0 -CORRECTANSWER Smart sensors connected to manufacturing networks
creates what level of Industry?
Ethernet -CORRECTANSWER What standard introduced in the early 1980s
established a method to physically connect machines from different manufacturers
enabling them to communicate to one another?
Predictive maintenance -CORRECTANSWER Which IIoT application monitors
equipment during normal operation to prevent failures to the equipment?
Standards -CORRECTANSWER Occupational Safety and Health
Administration(OSHA) develops __________ for safety retail and service industries to
construction and manufacturing.
True -CORRECTANSWER The regulation that requires manufacturers to document and
report information on the types of chemicals they use, store, release into the
environment, or dispose of is known as EPCRA. Is this statement TRUE or FALSE?
Computers -CORRECTANSWER The use of ___________________marked the
advent of the third industrial revolution?
, Notify a supervisor immediately -CORRECTANSWER If an operator knows a safety
problem exists with a machine, the operator should __________.
Emergency stop -CORRECTANSWER A(n) __________ is a device or system that
shuts down a machine immediately if the operator is in danger.
It is closed -CORRECTANSWER If the energy sources are shut down, what would this
mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment -CORRECTANSWER What are the 5 steps of electrical
Lockout/tagout
Falls -CORRECTANSWER Which of the following is a common cause of workplace
death?
Hazard assessment -CORRECTANSWER The process of identifying potential hazards
in the workplace is known as a __________.
Manufacturing & Safety Exam Q&A||
GRADED A+|| LATEST UPDATE 2026
Function -CORRECTANSWER The three Fs of product design are form, fit and
__________.
Lean Manufacturing -CORRECTANSWER High product quality, quick delivery, low
costs are the primary goals of what system?
Standardize -CORRECTANSWER Which 5S step involves formatting 5S work
instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean
methods to be more successful -CORRECTANSWER How does the 5S method aid in
the goal of lean manufacturing?
HMI -CORRECTANSWER What is the interface used with CNC machines to load and
monitor programs?
PLC -CORRECTANSWER The automation of many different manufacturing processes
is done through the use of a small computer called a __________.
,An error message. -CORRECTANSWER When a machine stops due to an problem,
what would the machine's HMI typically display?
Industry 4.0 -CORRECTANSWER Smart sensors connected to manufacturing networks
creates what level of Industry?
Ethernet -CORRECTANSWER What standard introduced in the early 1980s
established a method to physically connect machines from different manufacturers
enabling them to communicate to one another?
Predictive maintenance -CORRECTANSWER Which IIoT application monitors
equipment during normal operation to prevent failures to the equipment?
Standards -CORRECTANSWER Occupational Safety and Health
Administration(OSHA) develops __________ for safety retail and service industries to
construction and manufacturing.
True -CORRECTANSWER The regulation that requires manufacturers to document and
report information on the types of chemicals they use, store, release into the
environment, or dispose of is known as EPCRA. Is this statement TRUE or FALSE?
Computers -CORRECTANSWER The use of ___________________marked the
advent of the third industrial revolution?
, Notify a supervisor immediately -CORRECTANSWER If an operator knows a safety
problem exists with a machine, the operator should __________.
Emergency stop -CORRECTANSWER A(n) __________ is a device or system that
shuts down a machine immediately if the operator is in danger.
It is closed -CORRECTANSWER If the energy sources are shut down, what would this
mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment -CORRECTANSWER What are the 5 steps of electrical
Lockout/tagout
Falls -CORRECTANSWER Which of the following is a common cause of workplace
death?
Hazard assessment -CORRECTANSWER The process of identifying potential hazards
in the workplace is known as a __________.
