Plans Examiner for Fire and Emergency Services 2nd_ALL ACTUAL UPDATED
QUESTIONS AND CORRECT ANSWERS
NFPA Standard used for design of clean agent 2001
extinguishing system is NFPA ________ ?
Local governmental agency responsible for enforcing Building Department
building and other related Codes and regulations.
In general, emergency lighting should provide 1
illumination for all types of egress components with an
average illumination of at least ________ foot-candle at
floor level
NFPA Standard that deals with the Fire Safety and 170
Emergency Symbols is:
To alter the appearance of a building, room, or series of remodel
rooms is called __ ?
In general a set of plans is composed of six major Occupancy Standards
sections. Which is NOT one of these sections?
a. Occupancy Standards
b. Plumbing
c. Structural
d. Mechanical
A section drawing is made by passing an imaginary Plane
cutting ______ through a building or part of a building
Refrigeration machinery room will be required to have a 1
_ ____ hour Fire Rated separation from the remainder of
the occupancy unless it is sprinklered.
The _______(or plot) plan is usually one of the rst sheets of a Site
set of construction drawings
Utility drawings are plot plans that show the location of true
utilities serving a property
_______________Codes require that a Fire Alarm System have building
the capability of closing elevators to public use during a
fire
Overpressure is air pressure below normal or true
atmospheric pressure.
, Heat detectors for basic wet chemical systems are usually true
fusible link, although electronic heat detector that do not
use fusible links can also be used
A sketch depicting the general arrangement of the site plan
property in reference to streets, adjacent properties, and
other important features is known as a(n):
There are three types of electrical power, direct current false
(DC), alternating current (AC) and cycle current (CC)
Many authorities having jurisdiction DO NOT require false
design contractors to have a third party peer review
conducted on all performance-base-designs
Fire and Emergency Services Access Roads include All choices are correct
which of these requirements?
a. Minimum inside/outside radii
b. Acceptable surface
c. Minimum width
d. All choices are correct
Heat detectors include the following types EXCEPT deluge
a. fixed temperature
b. rate of compensation
c. deluge
d. rate-of-rise
Water pipes must be protected from freezing, which is 1
generally accomplished by burying the pipes at least
_ __ ft below the frost line
Which of the following is a horizontal drawing of a Floor plan
structure at a given level such as ground floor, basement,
or roof?
Which of the following is a two-dimensional view of the Plan view
site or building as seen from directly above the area?
If an appeal is granted by the Board of Appeal, the plan false
examiner is still not relieved of responsibility with respect
to the particular issue
It is common for codes to require a __________hour Fire- 1
Resistive rating for corridor walls in health-Care facilities
QUESTIONS AND CORRECT ANSWERS
NFPA Standard used for design of clean agent 2001
extinguishing system is NFPA ________ ?
Local governmental agency responsible for enforcing Building Department
building and other related Codes and regulations.
In general, emergency lighting should provide 1
illumination for all types of egress components with an
average illumination of at least ________ foot-candle at
floor level
NFPA Standard that deals with the Fire Safety and 170
Emergency Symbols is:
To alter the appearance of a building, room, or series of remodel
rooms is called __ ?
In general a set of plans is composed of six major Occupancy Standards
sections. Which is NOT one of these sections?
a. Occupancy Standards
b. Plumbing
c. Structural
d. Mechanical
A section drawing is made by passing an imaginary Plane
cutting ______ through a building or part of a building
Refrigeration machinery room will be required to have a 1
_ ____ hour Fire Rated separation from the remainder of
the occupancy unless it is sprinklered.
The _______(or plot) plan is usually one of the rst sheets of a Site
set of construction drawings
Utility drawings are plot plans that show the location of true
utilities serving a property
_______________Codes require that a Fire Alarm System have building
the capability of closing elevators to public use during a
fire
Overpressure is air pressure below normal or true
atmospheric pressure.
, Heat detectors for basic wet chemical systems are usually true
fusible link, although electronic heat detector that do not
use fusible links can also be used
A sketch depicting the general arrangement of the site plan
property in reference to streets, adjacent properties, and
other important features is known as a(n):
There are three types of electrical power, direct current false
(DC), alternating current (AC) and cycle current (CC)
Many authorities having jurisdiction DO NOT require false
design contractors to have a third party peer review
conducted on all performance-base-designs
Fire and Emergency Services Access Roads include All choices are correct
which of these requirements?
a. Minimum inside/outside radii
b. Acceptable surface
c. Minimum width
d. All choices are correct
Heat detectors include the following types EXCEPT deluge
a. fixed temperature
b. rate of compensation
c. deluge
d. rate-of-rise
Water pipes must be protected from freezing, which is 1
generally accomplished by burying the pipes at least
_ __ ft below the frost line
Which of the following is a horizontal drawing of a Floor plan
structure at a given level such as ground floor, basement,
or roof?
Which of the following is a two-dimensional view of the Plan view
site or building as seen from directly above the area?
If an appeal is granted by the Board of Appeal, the plan false
examiner is still not relieved of responsibility with respect
to the particular issue
It is common for codes to require a __________hour Fire- 1
Resistive rating for corridor walls in health-Care facilities
