BICSI Technician Exam Questions with Correct Answers

BICSI Technician Exam Questions with
Correct Answers 2026-2027
What network topology connects each device on the network to its neighbor device until all d
evices are connected - CORRECT ANSWER -Hybird



When expanding an existing TR where the wall needs to be removed and has active equipmen
t and terminations attached the installer will need to - CORRECT ANSWER -
Float the wall or rack



What common cabinet configuration providing increased efficiency in heat management is wh
ere - CORRECT ANSWER -The hot side of two cabinet rows face each other



What are pulling sheafed used for? - CORRECT ANSWER -
X2 X2 X2 X2 X2 X2 X2 X2 X2




To assist in the routing of the cable to the point where it will be pulled to the upper floors
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2




What are the 2 types of EMT couplings used to connect sections together? -
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2




CORRECT ANSWER -Compression and set screws
X2 X2 X2 X2 X2 X2




Using company property for business only, being punctual and maintaining confidentiality are e
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2




xamples of - CORRECT ANSWER -Professionalism
X2 X2 X2 X2




Radiating cable standoffs supports should be installed a MINIMUM of
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2




below th X2 X2




e cable tray - CORRECT ANSWER -77mm (3in)
X2 X2 X2 X2 X2 X2 X2




If you are connecting a pul rope to optical fiber without a wire mesh or pulling eye what shoul d
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X 2




you connect to - CORRECT ANSWER -The aramid yarn
X2 X2 X2 X2 X2 X2 X2 X2 X2




To avoid electromagnetic interference in cabling what is the recommended minimum separati on
X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2 X2




from fluorescent lamps - CORRECT ANSWER -150 mm ( 6in)
X2 X2 X2 X2 X2 X2 X2 X2 X2