NEW JERSEY FIRE PROTECTION CONTRACTOR
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) Q&A 2026|INSTANT
DOWNLOAD PDF
1. Which organization publishes NFPA codes used in fire
protection systems?
A. OSHA
B. NFPA
C. EPA
D. ANSI
Rationale: NFPA develops fire safety standards.
Answer: B
2. What is the primary purpose of a fire sprinkler system?
A. Detect smoke
B. Suppress fire automatically
C. Provide ventilation
D. Increase building pressure
Rationale: Sprinklers control or suppress fires.
Answer: B
3. Which system component activates sprinklers?
A. Pump controller
B. Heat-sensitive element
C. Alarm bell
D. Pipe gauge
,Rationale: Heat triggers sprinkler heads.
Answer: B
4. Minimum clearance around sprinkler heads is typically:
A. 6 inches
B. 12 inches
C. 18 inches
D. 24 inches
Rationale: Clearance ensures proper spray pattern.
Answer: B
5. Which valve controls water supply to sprinkler system?
A. Check valve
B. Main control valve
C. Drain valve
D. Relief valve
Rationale: Main valve regulates flow.
Answer: B
6. What does NFPA 13 regulate?
A. Fire alarms
B. Sprinkler systems
C. Electrical wiring
D. Exit lighting
Rationale: NFPA 13 covers sprinkler design.
Answer: B
7. Fire pump purpose is to:
,A. Detect smoke
B. Increase water pressure
C. Reduce pipe size
D. Drain system
Rationale: Pumps boost system pressure.
Answer: B
8. Which hazard class requires the highest sprinkler density?
A. Light hazard
B. Ordinary hazard
C. Extra hazard
D. Residential
Rationale: Extra hazard has high fire load.
Answer: C
9. A dry pipe system is used in areas where:
A. Heat is constant
B. Freezing may occur
C. Electricity is unstable
D. Smoke is heavy
Rationale: Air-filled pipes prevent freezing damage.
Answer: B
10. What triggers a fire alarm system?
A. Water flow
B. Manual reset
C. Heat/smoke detection
D. Pipe pressure
, Rationale: Sensors detect fire conditions.
Answer: C
11. What is the function of a flow switch?
A. Detect heat
B. Measure water movement
C. Control pumps
D. Seal pipes
Rationale: It detects water flow in pipes.
Answer: B
12. Standpipe systems are primarily used for:
A. Landscaping
B. Firefighter water supply
C. Electrical grounding
D. Ventilation
Rationale: They assist firefighting operations.
Answer: B
13. Which extinguisher is used for electrical fires?
A. Class A
B. Class B
C. Class C
D. Class D
Rationale: Class C is for energized equipment.
Answer: C
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) Q&A 2026|INSTANT
DOWNLOAD PDF
1. Which organization publishes NFPA codes used in fire
protection systems?
A. OSHA
B. NFPA
C. EPA
D. ANSI
Rationale: NFPA develops fire safety standards.
Answer: B
2. What is the primary purpose of a fire sprinkler system?
A. Detect smoke
B. Suppress fire automatically
C. Provide ventilation
D. Increase building pressure
Rationale: Sprinklers control or suppress fires.
Answer: B
3. Which system component activates sprinklers?
A. Pump controller
B. Heat-sensitive element
C. Alarm bell
D. Pipe gauge
,Rationale: Heat triggers sprinkler heads.
Answer: B
4. Minimum clearance around sprinkler heads is typically:
A. 6 inches
B. 12 inches
C. 18 inches
D. 24 inches
Rationale: Clearance ensures proper spray pattern.
Answer: B
5. Which valve controls water supply to sprinkler system?
A. Check valve
B. Main control valve
C. Drain valve
D. Relief valve
Rationale: Main valve regulates flow.
Answer: B
6. What does NFPA 13 regulate?
A. Fire alarms
B. Sprinkler systems
C. Electrical wiring
D. Exit lighting
Rationale: NFPA 13 covers sprinkler design.
Answer: B
7. Fire pump purpose is to:
,A. Detect smoke
B. Increase water pressure
C. Reduce pipe size
D. Drain system
Rationale: Pumps boost system pressure.
Answer: B
8. Which hazard class requires the highest sprinkler density?
A. Light hazard
B. Ordinary hazard
C. Extra hazard
D. Residential
Rationale: Extra hazard has high fire load.
Answer: C
9. A dry pipe system is used in areas where:
A. Heat is constant
B. Freezing may occur
C. Electricity is unstable
D. Smoke is heavy
Rationale: Air-filled pipes prevent freezing damage.
Answer: B
10. What triggers a fire alarm system?
A. Water flow
B. Manual reset
C. Heat/smoke detection
D. Pipe pressure
, Rationale: Sensors detect fire conditions.
Answer: C
11. What is the function of a flow switch?
A. Detect heat
B. Measure water movement
C. Control pumps
D. Seal pipes
Rationale: It detects water flow in pipes.
Answer: B
12. Standpipe systems are primarily used for:
A. Landscaping
B. Firefighter water supply
C. Electrical grounding
D. Ventilation
Rationale: They assist firefighting operations.
Answer: B
13. Which extinguisher is used for electrical fires?
A. Class A
B. Class B
C. Class C
D. Class D
Rationale: Class C is for energized equipment.
Answer: C
