Auto Body Collision Repair
QUESTIONS & SOLUTIONS
A _______ health hazard is caused by long term exposure to a hazardous material. -
ANSWERChronic
Isocyanates are an acute hazard. True or False? - ANSWERTrue
Three things required for a fire to start - ANSWERFuel, Oxygen and Heat
A type___ fire is caused by electrical equipment. - ANSWERC
A class A fire is caused by electrical equipment. True or False? - ANSWERFalse
VOCs are evaporating components in paint. True or False - ANSWERTrue
_____________ paints contain less solvent than previous types of paint. -
ANSWERWater based
A running engine produces Carbon Monoxide. True or False? - ANSWERTrue
Inhalation of isoxyanades will lead to - ANSWERSensitization
A 1/2 full oxygen tank does not need to be chained in place. True or False? - ANSWER
Name 5 pieces of protective gear that should be worn when spraying non-isocyanate
paints. - ANSWERPaint suit, Spray sock, Neoprene gloves, Cartridge-type respirator,
and Safety glasses.
Technician A says that chemicals can enter the bloodstream through the skin.
Technician B says that chemicals can enter the bloodstream through breathing in
vapors. Who is right? - ANSWERBoth
Burning paper is classified as a: - ANSWERType A fire
All of the following can be used to put out a liquid fire except which of the following: Dry
chemicals, Water, Foam, Carbon dioxide - ANSWERWater
Which of the following is created when paint is atomized?
Mist
Vapor
Concentration
All of the above - ANSWERMist
, Which of the following contain isocyanates?
Body filler
Paint Catalysts
Welding fumes
Lacquer thinner - ANSWERPaint catalysts
Which of the following is a symptom of isocyanate sensitization?
Wheezing
Coughing
Shortness of breath
All of the above - ANSWERAll of the above
A heavy bumper assembly must be lifted from the floor. Technician A bends his back
while technician B keeps her back straight and lifts w/ her legs. Who is right? -
ANSWERTechnician B
A tailgate will not open. Technician A wants to open the tailgate by striking it w/ his
elbow. Technician B wants to open the tailgate by hitting it w/ a rubber hammer. Who is
right? - ANSWERTechnician B
What type of welding shade is required when MIG welding? - ANSWER#10
A plasma cutter will be used to remove a quarter panel. Technician A wants to check
the quarter panel for insulation. Technician b wants to check the back of the quarter
panel for undercoating. Who is right - ANSWERBoth
Which of the following properties of metal indicates how readily the metal can be
sharpened and stretched by bending and stretching ?
Elasticity
Deformation
Plasticity
Inertia - ANSWERPlasticity
Technician A says that a low crown panel will flex in and pop out Technician B says that
a reverse crown panel flexes as much as a low crown panel. Whose right? -
ANSWERTechnician A Only
Which of the following describes a combination of crowns?
Curved in two directions
Almost flat
Curved into a convex shape
Curved into a concave shape - ANSWERCurved in two directions
Technician A says inertia only acts on an object at rest. Technician B says that inertia
only acts on objects in motion. Whose right? - ANSWERNeither
QUESTIONS & SOLUTIONS
A _______ health hazard is caused by long term exposure to a hazardous material. -
ANSWERChronic
Isocyanates are an acute hazard. True or False? - ANSWERTrue
Three things required for a fire to start - ANSWERFuel, Oxygen and Heat
A type___ fire is caused by electrical equipment. - ANSWERC
A class A fire is caused by electrical equipment. True or False? - ANSWERFalse
VOCs are evaporating components in paint. True or False - ANSWERTrue
_____________ paints contain less solvent than previous types of paint. -
ANSWERWater based
A running engine produces Carbon Monoxide. True or False? - ANSWERTrue
Inhalation of isoxyanades will lead to - ANSWERSensitization
A 1/2 full oxygen tank does not need to be chained in place. True or False? - ANSWER
Name 5 pieces of protective gear that should be worn when spraying non-isocyanate
paints. - ANSWERPaint suit, Spray sock, Neoprene gloves, Cartridge-type respirator,
and Safety glasses.
Technician A says that chemicals can enter the bloodstream through the skin.
Technician B says that chemicals can enter the bloodstream through breathing in
vapors. Who is right? - ANSWERBoth
Burning paper is classified as a: - ANSWERType A fire
All of the following can be used to put out a liquid fire except which of the following: Dry
chemicals, Water, Foam, Carbon dioxide - ANSWERWater
Which of the following is created when paint is atomized?
Mist
Vapor
Concentration
All of the above - ANSWERMist
, Which of the following contain isocyanates?
Body filler
Paint Catalysts
Welding fumes
Lacquer thinner - ANSWERPaint catalysts
Which of the following is a symptom of isocyanate sensitization?
Wheezing
Coughing
Shortness of breath
All of the above - ANSWERAll of the above
A heavy bumper assembly must be lifted from the floor. Technician A bends his back
while technician B keeps her back straight and lifts w/ her legs. Who is right? -
ANSWERTechnician B
A tailgate will not open. Technician A wants to open the tailgate by striking it w/ his
elbow. Technician B wants to open the tailgate by hitting it w/ a rubber hammer. Who is
right? - ANSWERTechnician B
What type of welding shade is required when MIG welding? - ANSWER#10
A plasma cutter will be used to remove a quarter panel. Technician A wants to check
the quarter panel for insulation. Technician b wants to check the back of the quarter
panel for undercoating. Who is right - ANSWERBoth
Which of the following properties of metal indicates how readily the metal can be
sharpened and stretched by bending and stretching ?
Elasticity
Deformation
Plasticity
Inertia - ANSWERPlasticity
Technician A says that a low crown panel will flex in and pop out Technician B says that
a reverse crown panel flexes as much as a low crown panel. Whose right? -
ANSWERTechnician A Only
Which of the following describes a combination of crowns?
Curved in two directions
Almost flat
Curved into a convex shape
Curved into a concave shape - ANSWERCurved in two directions
Technician A says inertia only acts on an object at rest. Technician B says that inertia
only acts on objects in motion. Whose right? - ANSWERNeither
