DANTE LEVEL 2 TEST EXAM 2026|2027 UPDATED QUESTIONS WITH
DETAILED VERIFIED ANSWERS (100%) | ALREADY GRADED A+
Which Dante software supports redundant connections? - Correct Answer -Dante Controller
The Dante clock leader election is an automatic process.
However, you can manually influence the winning device(s).
Which is the highest tier? - Correct Answer -Preferred Leader Checked
How many audio channels can be contained in a Dante unicast flow? - Correct Answer -4
Dante Controller can recall part of a preset - only storing information about some settings and/or
limiting which devices we want to recall them on. - Correct Answer -True
What advantages does unicast have over multicast communication? (Select 3.) - Correct Answer -Unicast
is simpler to deliver, reducing the strain on the switch.
Unicast can achieve lower latency than multicast. (Minimum latency for multicast is 1msec.)
Unicast can cross a router, multicast cannot.
1|Page
, A multicast subscription is made between two Dante devices. The latency value of the transmitter and
receiver are 0.25msec and 0.5msec, respectively. What is the resulting latency of this stream? - Correct
Answer -1.0 msec
When a Dante preset is saved, where is the information kept? - Correct Answer -Dante Controller writes
a text file (XML format) to the computer. This file can be shared to other users or archived for recall
later. When the preset is recalled, Dante Controller systematically restores all settings, one at a time.
What protocol does Dante for clocking? - Correct Answer -PTP
What is the "golden rule" about Dante redundant networks? - Correct Answer -Do not link the primary and
secondary networks - they must remain in separate broadcast domains.
Since the beginning of Dante, multicast flows could carry X channels per flow.
With newer firmware, multicast flows can carry up to Y channels per flow. - Correct Answer -Since the
beginning of Dante, multicast flows could carry 8 channels per flow.
With newer firmware, multicast flows can carry up to 64 channels per flow.
As a simple rule of thumb, how much latency should be allowed per network switch hop? - Correct Answer
-0.1 msec (100 microseconds)
2|Page
DETAILED VERIFIED ANSWERS (100%) | ALREADY GRADED A+
Which Dante software supports redundant connections? - Correct Answer -Dante Controller
The Dante clock leader election is an automatic process.
However, you can manually influence the winning device(s).
Which is the highest tier? - Correct Answer -Preferred Leader Checked
How many audio channels can be contained in a Dante unicast flow? - Correct Answer -4
Dante Controller can recall part of a preset - only storing information about some settings and/or
limiting which devices we want to recall them on. - Correct Answer -True
What advantages does unicast have over multicast communication? (Select 3.) - Correct Answer -Unicast
is simpler to deliver, reducing the strain on the switch.
Unicast can achieve lower latency than multicast. (Minimum latency for multicast is 1msec.)
Unicast can cross a router, multicast cannot.
1|Page
, A multicast subscription is made between two Dante devices. The latency value of the transmitter and
receiver are 0.25msec and 0.5msec, respectively. What is the resulting latency of this stream? - Correct
Answer -1.0 msec
When a Dante preset is saved, where is the information kept? - Correct Answer -Dante Controller writes
a text file (XML format) to the computer. This file can be shared to other users or archived for recall
later. When the preset is recalled, Dante Controller systematically restores all settings, one at a time.
What protocol does Dante for clocking? - Correct Answer -PTP
What is the "golden rule" about Dante redundant networks? - Correct Answer -Do not link the primary and
secondary networks - they must remain in separate broadcast domains.
Since the beginning of Dante, multicast flows could carry X channels per flow.
With newer firmware, multicast flows can carry up to Y channels per flow. - Correct Answer -Since the
beginning of Dante, multicast flows could carry 8 channels per flow.
With newer firmware, multicast flows can carry up to 64 channels per flow.
As a simple rule of thumb, how much latency should be allowed per network switch hop? - Correct Answer
-0.1 msec (100 microseconds)
2|Page
