Measurement, Materials, and Safety (NIMS) Questions and Correct Answers
Measurement, Materials, and Safety (NIMS) Questions and Correct Answers The safest way to remove chips from a lathe or milling machine is to use a - Correct Answer brush Small chips left out on the spindle nose of a lathe should be cleaned to avoid - Correct Answer Run out on work holding devices Grease guns are used to insert grease into - Correct Answer Zerk fittings on machine tools To lubricate the ways of a late, the gibs of a mill, or the cross slide of a grinder - Correct Answer Use lubricant found in central lubricating systems ("one shots") If a vertical mill table is loose and has side play, the best solution to alleviate side play is to - Correct Answer tighten the taper gib adjustment A machinist wants to find the proper type of lubrication, schedule and recommended maintenance practices for the headstock of a lathe. The best source to find this information is - Correct Answer Preventative maintenance schedule and machine manual General maintenance information for machine tools and machine work area can be found - Correct Answer In a general maintenance manual Pinning refers to - Correct Answer Loading the file with metal chips Files should be stored - Correct Answer In a toolbox separated from eachother The best way to clean the chips out of a file is using a - Correct Answer File card What is the most common injury
Document information
- Uploaded on
- May 19, 2026
- Number of pages
- 6
- Written in
- 2025/2026
- Type
- Exam (elaborations)
- Contains
- Questions & answers
