NCCCO TELESCOPIC BOOM CRANE -SWING
CAB(TLL) EXAM WITH GUARANTEED ACCURATE
ANSWERS |COMPLETE| UPDATED 2026
A crane is operating with a long boom, on outriggers, on uneven ground. Under
these conditions it is important to -ACCURATE ANSWER Block under the float
or pad to achieve a 90 degree angle between the cylinder rod and the float or pad
What is the purpose of a boom length indicator? -ACCURATE ANSWER Indicates
the extended length of boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to the
outrigger/stabilizers when -ACCURATE ANSWER They are in use
A crane's jib is offset 15 degrees versus it's original 0 degree offset and the boom
angle remains unchanged, the load radius will -ACCURATE ANSWER Increase
When leaving telescopic boom cranes unattended overnight or for longer periods,
the boom should be -ACCURATE ANSWER Fully retracted and stowed
On a telescopic boom truck crane that has all 5 outriggers properly positioned, the
working area diagram will indicate the "over front" area is -ACCURATE
ANSWER Determined by the crane manufacturer
According to OSHA 1926 subpart cc, who determines if a crane can be used for
pick and carry operations? -ACCURATE ANSWER The manufacturer
CAB(TLL) EXAM WITH GUARANTEED ACCURATE
ANSWERS |COMPLETE| UPDATED 2026
A crane is operating with a long boom, on outriggers, on uneven ground. Under
these conditions it is important to -ACCURATE ANSWER Block under the float
or pad to achieve a 90 degree angle between the cylinder rod and the float or pad
What is the purpose of a boom length indicator? -ACCURATE ANSWER Indicates
the extended length of boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to the
outrigger/stabilizers when -ACCURATE ANSWER They are in use
A crane's jib is offset 15 degrees versus it's original 0 degree offset and the boom
angle remains unchanged, the load radius will -ACCURATE ANSWER Increase
When leaving telescopic boom cranes unattended overnight or for longer periods,
the boom should be -ACCURATE ANSWER Fully retracted and stowed
On a telescopic boom truck crane that has all 5 outriggers properly positioned, the
working area diagram will indicate the "over front" area is -ACCURATE
ANSWER Determined by the crane manufacturer
According to OSHA 1926 subpart cc, who determines if a crane can be used for
pick and carry operations? -ACCURATE ANSWER The manufacturer
